I have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
Before using iLogic, I created lot of iAssembly and iPart. I could change iPart factory member when I need in iAssembly.Now, I want to move everything to iLogic.
how could I change the part by iLogic code?
For example:
I generated "Part1.ipt" and "Part2.ipt",...... (I have hundred of member)
In my assembly, sometimes, I need use Part1.ipt, sometimes I need use Part2.ipt.
Which is the iLogic Code I should to use?
Inventor 2009, WIN XP.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
there is a way to change the template used for a part or assembly. The problem is that I created a template to fit my needs but I had to update it and the update doesn't effect the parts created with the old version one. How do update the templates of the files created using the old template?
View 4 Replies View RelatedMy part color is yellow. In the assembly It shows as gray.
I cant seem to get it to change to match the part color. I used to know why this happens and knew how to fix it but seem to have forgot. How do you get this to work?
I also recently loaded 2014, but had the same problem with 2013, so its not a release issue.
This is my first time using Inventor but I've been using ProE for several years in school. A friend of mine told me about a feature in ProE where you are able to define a part and then define one of the lengths as it is placed into an assembly. For example I would define a 2x4 part with a length of 84inches. If I wanted a 2x4 of 68inches in my assembly I would use the same file but simply change the 84 to 68. How can I do this with Inventor?
View 1 Replies View RelatedI have a part that occurs nine times in an assembly. These were all the same parts before but now I need to make them table driven iParts in order to add a custom iProperty that changes to make them all different. They are all the same except for this on iProperty field that changes.I can create the iPart no problem. My questions are:
1.) Should I just open the part file and make it an iPart?
2.) Do I need to replace the files in the assembly somehow?
3.) I would assume that I can just edit the file to make it an iPart and then use some kind of "change component" right click to select which one goes where right?
4.) Is there some other workflow I should be using?
I have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
How do I change the a part material render style within an assembly?
I have tried this below. It changes the name but doesn't update the render style.
Sub Material()Dim oassy As AssemblyDocumentSet oassy = ThisApplication.ActiveDocumentDim ocompdef As AssemblyComponentDefinitionSet ocompdef = oassy.ComponentDefinitionDim ooccurr As ComponentOccurrencesSet ooccurr = ocompdef.OccurrencesDim opartdef As ComponentDefinitionSet opartdef = ooccurr.Item(11).Definitionopartdef.Material.RenderStyle.Name = "Red"End Sub
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedI have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedI am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies View RelatedI've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies View RelatedI have a part that is inserted in an assembly. If I change the color of certain portions of the part it isn't reflected in the assembly.
View 5 Replies View RelatedI have written a program where i will copy inventor assembly tree to custom form in tree format. Now my problem is whenever i click a part in tree i must edit the part. I am trying to access the Fx parameter/IAssembly to use it but not getting desired results .
View 8 Replies View RelatedI need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
I have an assebly where i have imported parts and other assemblies. Unfortunatly during process of assigning them together they have rotated by various angles.Is it possible to somehow "reset" the rotation of part according to global xyz?
View 3 Replies View RelatedMy need is to assembly parts into an assembly by a known position in the assembly. The part has a UCS and I create UCS on the assembly programatically. What I cannot do is to constrain the two UCS. I tried this (Inventor 2013 x64 on W7/W8 64, c++ 2010 by the way DEBUG mode is not working from the IDE):
CAssemblyComponentDefinition compDef = doc.get_ComponentDefinition();
// MOdules UCS
CUserCoordinateSystems coords = compDef.get_UserCoordinateSystems();
CTransientGeometry geom = m_InventorApp.get_TransientGeometry();
CMatrix matrix = geom.CreateMatrix();
[code]...
What is the meaning of the (*) sign near the part (see picture atttached)?
View 1 Replies View Related
