Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 RepliesI have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
I don't know how useful this will be but I was trying to figure out how to track what item number in an assembly any given part may be. I was thinking that on an individual part drawing I may want to reference the item number that is used in an assembly's Bill of Material for that part. I can't find where this may be stored for retrieval. If I do this I would want it to be automated so that if the BoM were renumbered the part file and drawing would update to the new item number.
This may not be possible since any part may be used in any number of different assemblies with different locations in a Bill of Material. Most of our assemblies use "one off" parts that are only used in that assembly so it may be possible in my particular situation to do this if there is a way to get at the BoM item number and connect it to the IPT file.
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
Is it possible, if you have a merged BOM.row to get the total quantity of each part?
inventor professional 2011 / 2012 / 2013
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedIf I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I have a sheet metal part with a fully dimensioned drawing made for it. I then make a mirrored (derived) part out of the original. Is there an easy way to get a fully dimensioned drawing of that mirrored part?
I have tried making a copy of the original parts drawing and then replacing the model that is referenced in the drawing but that just gets me a drawing with a bunch of pink dimensions and I have to drag all the dimension points to reattach them.
I was wondering if there is a way that a mirrored part can be redefined. Problem I have is that after renaming the parts in the assembly the mirror will no longer update and references the original part before being renamed. I can't seem to find a way to redefine this so my mirrored part will update. To date I have been deleteing out the mirrored parts and creating them again.
View 1 Replies View RelatedMirroring a part or assembly in 2014 makes the derived part with all sketches visibility on, nevertheless the original sketches visibility is off.
[URL]....
It makes me sick switching them down.
Is it treatable?
I have a sheet metal IPT that I saved, then did a saveas and saved as a different file name. I then took the part in the new IPT and did a mirror on the part. I chose the second "Mirror a Solid" option in the mirror dialog box, and clicked "Remove Original". Now that I'm at this part, when I try to make a flat patten of the new mirrored part, all I get are the bend and center lines of the part, not the internal and external lines that I can export for use in water/laser cutting.
I was wondering if I was doing something wrong in order to make this work. In looking through the forums I have seen people say not to use the mirror command in an assembly and create a derived part because that has issues, but I did this in an IPT, not an IAM. I have also read to make sure that the Sheet Metal Defaults are set the same, but I believe that they are talking about the derived part from an IAM drawing. All the same, I have checked my Sheet Metal Defaults and they are all the same, and in fact I tried updating them to see if it would still change the part, and it did. I was able to make my part other thicknesses and it updates the part as per the norm.
I am using Inventor 2013 Professional, if it matters at all. I have also attached a couple of picture files showing the part folded and how it looks to me when I go to the flat pattern.
I created a sheet metal part with multi-edge flanges; the part unfolded no problem. Now, I need an exact, mirrored copy of that part [new part number]. My first attempt was a mirrored component at the assembly level. The part was mirrored but it would not unfold. My next attempt was a derived part with the mirrored option selected. This part, too, was mirrored but would not unfold either.
"In sheet metal parts, mirroring flanges or contour flanges created using multi-edge select is not supported." Is this why the flat pattern fails?
Is there a workaround? I'd hate to create the mirrored part from scratch when I all need is reverse bends.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I want to use the part number propertie to change the sheet name in the .idw
So when i insert a new sheet and place a part the part number wil be placed in the title block and i want to change the sheet name to that part number.
I name my files with our part numbers and the revision number. Our part numbers are 6 to 9 digits long and sometimes start with a zero! My iLogic rule, while simple, drops the first zero if its there. See the "FirstNumbers" below: (I tried to add the CStr(), but now I see that it just changes it to text after it drops the zero!)
ThisFile = ThisDoc.FileName(False) 'without extensionFirstNumbers = CStr(Val(ThisFile)) 'sets the first numbers from the file name to textPartNumber = iProperties.Value("Project", "Part Number") 'reads part number from file
'check to see if the part number is the same as the file name's numbersIf String.Compare(FirstNumbers, PartNumber, True) = 0 Then'do nothingElse
'set the Part Number to the file name's numbersiProperties.Value("Project", "Part Number") = FirstNumbers
'let's me know that something has been doneMessageBox.Show("Part Number has been set to " & FirstNumbers, "Part Number from File Name")End If
I created a bom export rutine but when a virtual component is the same as a inserted standard part the rowmerge does not work.
See example picture in attachment.
How can I get the Part Number property in pipe parts ? In the family table the part number exist, it is mapped to the Part Number property, but when I create a piping the Part number is empty.
View 7 Replies View RelatedIs it possible to search for a part number (Not file name).
I don't have vault and I would like to find a part number on the computor but I'm not sure how and if it is possible.
Is there a api to read part number value in properties "Project Tab" for a drawing document?
View 2 Replies View RelatedI have one doubt i have one big assembly in that more than thousand parts.
my doubt is how to find particular part in browser bar.
like how to search particular part number in browser bar.
I want to put a flexible hose into an assembly in different places.
In the real world it would be the same part, but as the hose would needs to bend at different angles for the different positions I would need different models.
I know I can group components with the same part number in the Parts List, but how do I make sure the components are seen by Vault and other users as being the same component ?
Currently using Inv 2011sp2 Pro and Vault 2011. But I don't have much experience of using Pro
I need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
Is there a way to get a part number on pipes created by the routing tool? It seems that if it's default or custom data, the data gets blanked out on the generated files.
I'm trying to get this to work for a client who uses 2011, and from what I can tell this is still an issue in 2013.
I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies View Related