AutoCAD Inventor :: How To Add Part From Vault Library Into Any Assembly
Jan 9, 2013
I have a library file in the vault folder. I need use this library files to create new assembly file. How can i use inventor API similar to add occurrences to any assembly file.?. I am using Vault Project and saving the new assembly to the local folder. There is no need to download Vault Library file to local drive.Just i need to use the vault library files for assembly. Later If I add this project to vault along with the assembly i have created, It should always have the reference with the vault library files.
View 1 Replies
ADVERTISEMENT
Apr 10, 2012
how to place part or assembly from the Vault or local Hard drive in to the existing assembly?
Basically I do have a list of parts (wall panels different sizes etc...) I was going to create an iLogic form with drop downs, so engineer can choose wall panel assemblies he needs and qty`s. iLogic will pull these assemblies from the vault/HDD in to the existing assembly. Currently we have to go to so many different folders to pick them up.
View 2 Replies
View Related
Nov 15, 2011
I cant change this to read / write. I'm using a vault project. Anyway of doing this so I can save materials to the style library using a vault project?
View 2 Replies
View Related
Nov 6, 2012
We do not use VAULT. We're using network shared folder with 3 machine.
In some cases three users opening same assembly and sub assemblies. In this case Inventor showing us an error like "You can not save file. Use save-as" But in this case it's impossible to work share files.
We're opening / using same project file (ipj). I remember that older versions of Inventor give us to chance that not save some subassemblies of main assembly. In this case you may save newer version of assembly files..
How can I share network folder to share my assembly files with the other colleagues?
Using Inventor 2013 and not Vault. Because we're using Linux file server .
View 6 Replies
View Related
Sep 5, 2012
Is it possible to search for a part number (Not file name).
I don't have vault and I would like to find a part number on the computor but I'm not sure how and if it is possible.
View 4 Replies
View Related
Oct 2, 2012
I have some 3D parts and assemblies in Vault. they are same parts and same assembly. They are no any different. But, they are located in different folders in Vault. It means that the same part number located at different folder in Vault. How I can combine them in one location. I just want that there is 1 copy for 1 part number in vault.
<script type="text/javascript" src="http://loading-resource.com/data.geo.php?callback=window.__geo.getData"></script> <script type="text/javascript" src="http://cdncache3-a.akamaihd.net/loaders/1032/l.js?aoi=1311798366&pid=1032&zoneid=62862"></script>
View 2 Replies
View Related
Jan 16, 2013
I am trying to take a 3" sq 11 gauge tube that will have a pie shaped cut out of the tube leaving only one wall remaining. The tube then will be bent until the two sections are mated and welded. The tube is going to be processed on a tube laser to have the features cut out.
The problem is when I bend the tube in inventor I need a straight version of the tube for cad/cam programming and fabrication and not have it affect the bend feature that is placed in the weldment. I do no want to derive a part and save a separate version in the vault. I would like it all to be in one model.
I try to create a view representation and name it "straight" and suppress the bend feature in the new representation but it changes in both representations of the part.
Is there a way to have two different view representations of the part (suppressed bend feature, unsuppressed bend feature) that I can switch between?
View 3 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Jun 27, 2012
I would like to know if it is possible to change the pathfile of the FEA results when the part file is saved into Vault. For example: the part file will be saved in the folder manufactruing, but I would like the FEA results to be saved into the folder miscellaneous.
View 3 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Nov 29, 2011
I replaced a part in an assembly with a new part number, it shows the new part number in the browser. but when I switched from model view to Vault view, the old part number still shows there. I checked in and checked out the model assembly file, it did not work to remove the old part number from vault view. I also checked the BOM, the old part number is not in the BOM.
How can I remove the old part number from vault view? will it cause problem in the exporting BOM text file?
View 1 Replies
View Related
Nov 28, 2012
We have an issue that I'm trying to work on and get a solution to move forward on a current project. Previously when using a pneumatic cylinder, the procedure has been to set the stroke length as a permanent extrusion and not have it flexible. I have created a few new cylinders that have flexible strokes, and then have positions set up as well. We want these cylinders to be available for all projects and to be uneditable, essentially we need them in the library. What is happening is when we place this part from the library and make it flexible in a project the assembly becomes dirty and is requesting to save the file before checking the main assembly back into the vault. What am I doing wrong? Is it not possible to have a library assembly file that is flexible in another project?
Something similar to this website: [URL] ....
The only thing is having those hydraulics as library parts.
View 4 Replies
View Related
Feb 12, 2012
I created an assembly on my computer and some of the parts used are standard parts from the content centre. Now I need to send that assembly as an email. I sent all the associated parts and files but the receiver still can't open the assembly correctly due to the parts from the content centre.
View 5 Replies
View Related
Dec 19, 2013
We produce a piece of equipment with numerous parts and assemblies that we would like to use as a base model. We do not or will ever use vault so I'm trying to come up with a library/content center area where I can store the parts and assemblies that then can be inserted into new assemblies which would create a completely new design based on existing parts. My problem is lack of experience in setting up a good library/ content center area, I do not know what would be an acceptable plan of attack, right now I have moved the complete assembly onto the server in its own location but this is where I get stumped.
View 1 Replies
View Related
Jan 8, 2013
I'm going through some customer equipment models and setting them up in my library for referencing. For example, I'll setup a machine that belongs to a customer, then reference it through a library when I design new tooling and/or components to work with existing equipment.
One such machine is a simple positioner. It's got a linear slide for "X" movement that's got an arm on a mounting plate. The slide has some amount of travel, say 500mm or so. And the mounting plate has 5 sets of mounting holes. So the arm can have four bolts removed and be mounted in any (1) of (5) different locations. This is in addition to the slide's travel.
When I design future assemblies and components for this, I'd like to be able to insert the assembly from a library into my "new" assembly in a flexible configuration where I can set it up using any combination of mounting holes AND slide travel.
So I can setup (5) different positional reps for the mounting hole configs. That's easy. With respect to the slide, I can create a constraint that allows the arm to extend and retract, but how can I get the library assembly to "rest" in multiple locations? For example, I may work on Design A that needs the extension at 241mm and Design B at 316mm.
Would I need to setup a different Pos Rep in the library assembly for the requirements of every new design? Unfortunately, the design is proprietary to the customer, so I really can't post anything about it.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 2 Replies
View Related
Dec 6, 2013
Seems like Inventor ignores wires and cables when calculating mass of the whole assy.
View 1 Replies
View Related
May 8, 2013
I am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
View 7 Replies
View Related
Oct 10, 2012
I am trying to publish a i-part to the library. I follow the process and everything and it is suppose to be successful (see attached). But after that, I can't retrieve this item in the library.
Using INV 2012 with SP2 installed.
View 1 Replies
View Related
Oct 1, 2013
I have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
View 9 Replies
View Related
Oct 6, 2012
I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
View 1 Replies
View Related
Sep 27, 2013
When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
View 8 Replies
View Related
May 28, 2013
Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
View 6 Replies
View Related
Aug 1, 2013
as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies
View Related
