.My Inventor2009 keep crashing everytime i'm trying to traslate/import Mech. Desktop2009 files....Windows7 is my os platform. Done all latest SP both for Inventor & Mech Desktop.
View 1 Replieshow to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies View RelatedCan Mechanical Desktop 2009 be installed with Inventor 2013?
View 5 Replies View RelatedI have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View RelatedHow to Translate the model from Mechanical Desktopt in Inventor 2014.
Program requires installed mechanical desktop.
How to tranalate without having mechanical desktop?
I have a drawing that was sent to me using Autodesk inventor 8 but I want to add it to a drawing I have already started in Mechanical Desktop 2004 is there any way to export the drawing into a format that can be opened by Mechanical Desktop 2004?
View 1 Replies View RelatedWhen I start the subject application, I experience delay in opening the program & error as attached appars on sreen.
View 1 Replies View RelatedI am trying to import my MDT 2009 (SP3) files into Inventor 2012 (SP1) but I get the error in the subject line.
View 9 Replies View RelatedWhen the senior engineer at our company opens my acad drawings all of the text justification is off.
I'm using acad 2009 mech and saving as to 2007.
He is using 2007 LT?
how to get the FEA box to appear in the ribbon in Mechanical Destop?
View 7 Replies View RelatedWe need to be able to open MDT 2008 3D drawings in Autodesk Mechanical 2013.
I also would like to know if there is a way to convert a lot of files? (like using a batch or something similar)
My 2009 Autocad Lt system is crashing on a regular basis with the following:
Fatal Error: Unhandled access violation writing 0x2FS0e798 exception at 77982FC6H.
can you open inventor pro 2012 files on inventor pro 2009?
View 2 Replies View RelatedTranslating when rendering only seems to use 1 cpu core and takes 90% of the render time, so having a quad core processor running a view that takes 10 min render only gives me a 5% decrease in time over a dual core...
I don't think you can really call Inventor rendering a multi core app?
I'm a LONG time Corel user -- back to version 4. Have been using X3 for years. Bought X5 but liked X3 better so I kept using it. (Basically only used X5 to import customer Illustrator files and PDFs that wouldn't import correctly into X3.)
Got new computer with Windows 7 and decided to upgrade to X6 64 bit. Overall it's been fine. Only using for a few days.
One thing I do are custom estimates for my clients. I keep several "stock" paragraphs of content on the desktop so I can copy and paste these into the estimate. Typically I just open an old estimate, rename it, and start the new estimate.
Opened X3 estimate in X6 and renamed it. Having some strange behaviors. The file was way too big. Should have been a couple hundred k and it was more than 4mb. Crashed several times. When I would add a page and copy content from a previous page, it would make the desktop grid printable, and I couldn't turn it off. Crashed some more.
Decided to start with a new X6 document. Copied pieces from the X3 file to make a new estimate template. File size now looks correct at a couple hundred k. Everything working fine except when I try to copy text from a paragraph box on the desktop INTO a paragraph box on the page it crashes. Not every time, but often.
I have Architecture 2009 on both my PC and laptop. The laptop version is functioning properly but the PC version started having problems a few weeks ago. On my PC when I open up the Design Center / Autocad Architecture / AEC Content there should be icons for both the AEC Imperial and AEC Metric folders - there are no folders
I design / draw in Imperial and currently have no access to the AEC Design and
AEC Documentation files. Is it possible to restore or reactivate the AEC files without a complete uninstall/reinstall of the software?
Does Autodesk Simulation Mechanical bundle with any of the Inventor packages?
View 1 Replies View RelatedHow I can add materials to the Inventor material library. I have created and defined the material in Autodesk Simulate Mechanical and they are available in the material libraries in that program, but inaccessible in Inventor. It doubles my work load if i need to define the materials in both programs and also creates hassles if a change needs to be made to a single material.
The materials are currently saved in .mlb library files. Iventor requests a .asklib file for when trying to add a library.
My client wants to buy Inventor 2013 and want to installed MDT 2009. How to install MDT 2009 of inventor 2013? He has a large data base of MDT. If he can not be installed MTD2009 he will not buy inventor 2013.
View 2 Replies View RelatedOur company is planning to buy new workstations Dell Precision T1700 [URL] and we have question about compatibility with Inventor 2009: Will there be issues with drivers or directx etc. that don´t match with Inventor 2009 ?
View 5 Replies View RelatedJust thought I would post this since I didn't see it anywhere else. With Inventor 2009, the views in IDW are automatically set to associative which causes the visibility option for parts/assemblies to be grayed out.
View 3 Replies View RelatedMy ctrl key has stopped working in Inventor.
It works fine in other programs.
Also when I hit F7 in a sketch Inventor does not show the section of the part to my sketch plane.
Also, my memory bar indicator does not work, it just stays all grey.
Running Inventor pro 2009 building simple fabrications and assemblies and it randomly shuts down without warning or any error code. This is happening regularly an dwith no apparent pattern or trigger.
View 1 Replies View RelatedWhat is the risk Migrating Inventor 2009 files to Inventor 2012?
Do i have to migrate the Inventor 2009 files to 2010 and up to 2012?
Using Inventor 2009. For some reason (all of a sudden) it will not open a step file. When I go to search for the file I would always use the file drop down an there would be a lengthy list of options. For some reason now it will only list the basic native formats... part, assembly etc. How I can get these back?
View 8 Replies View RelatedFinally, we updated to 2013 Inventor Professional (64 bit).
Now I have some problems when I run the rule which I created in 2009 (32 bit).
First one is:I created a rule which is suppressed. I need run it when I save files. The problem is: after I moved to 2013, and when I puch SAVE button, my rule cannot be run.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
My students draw all of the individual parts of a product as ipt files. Next they create an assembly using those ipt files on a iam template. Next they generate a multiview assembly drawing on a idw template from the iam file. On the idw multiview assembly random visible lines disappear and we are not able to get them back. Students are turning of the visiblity of some of the hidden lines on the idw assembly but not all hidden lines.
View 2 Replies View RelatedI am trying to determine the moment of inertia of an L-section using IV 2009. By selecting Tools>Region Properties of a closed loop profile in the sketch environment the moment of inertia is given, however the principal axes through the centroid are at 45 degrees to the toe of the angle (see attached image). I want Ixx and Iyy where the X and Y axes are parallel to the horizontal and vertical toe respectively.
Coincidentally, AutoCAD orientates the principal axes the same when viewing the Region Mass Properties of a similar Region.
I need translating the layer from one drawing to another. e.g. I have some standard layers in our drawing template and I want to move the contents of our client's drawing to our default drawing template without their layers. Or may be is there a way to auto convert the layers to match our standard layers?
View 4 Replies View RelatedAfter installing Inventor 2009, you may find that other software on your machine now has connection issues such as Apache Web Server, Skype or other servers/programs that are configured to use port 80.
This is because Data Management Server 2009 is configured to connect to that port every time you reboot your computer. If you go to your Windows start bar, select 'Run' and type in services.msc, you will see a list of services. Scroll down to 'Autodesk EDM Server', its' Status' should be labelled 'Started' and its 'Startup Type' should be 'Automatic', which means that this service is started when you turn on your machine, thus connecting to port 80 automatically.
You could change the 'Startup Type' to 'Manual', so that any of your other servers/progams that need to connect to port 80 will function properly, but that would limit the ability for Inventor 2009 and other programs that are configured to use port 80 to run simultaneously. You would also have to manually start this service every time that you require to use Inventor 2009 and the Vault.
If you don't mind EDM Server to hang onto port 80, but you're having connection problems with Skype, then change over to another port for Skype. Open up Skype, goto Tools -> Options -> Advanced -> Connection. If the checkbox is selected for 'Use port 80 and 443 as alternatives for incoming connections', then uncheck it and restart Skype.
So, how do you configure EDM Server to connect to another port? There are four configuration files that need to be changed, so the default of port 80 is not used.
1. C:Program FilesAutodeskData Management Server 2009ADMS ConsoleConnectivity.ADMSConsole.exe.Config
Change port value to 8081:
<connectivity.vaultmanager>
<webServer>
<add key="SSL" value="0" />
<add key="PORT" value="8081" />
</webServer>
</connectivity.vaultmanager>
2. C:Program FilesAutodeskData Management Server 2009ServerDispatchConnectivity.WindowsService.JobDispatch.exe.config
Add port number 8081: <add key="Server" value="127.0.0.1:8081" />
3. C:Program FilesAutodeskData Management Server 2009ServerWebServicesWeb.config
Change port value to 8081:
<connectivity.web>
<server port="8081" sslRequired="false" />
</connectivity.web>
4. C:Program FilesAutodeskData Management Server 2009ServerWebserverConnectivity.EDMWS.Server.exe.config
Change port value to 8081: <webserver runMode="service" port="8081" useHttpSys="auto">
You will have to restart 'Autodesk EDM Server' in services for changes to apply.This should eliminate your connection issues. Why Autodesk has decided to use 80 as the default port number without an easy way to change this through the console is just silly in my opinion.