AutoCAD Inventor :: Does Autodesk Simulation Mechanical Bundle With Any Packages
Jun 21, 2012Does Autodesk Simulation Mechanical bundle with any of the Inventor packages?
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Export From Autodesk 8 To Mechanical Desktop 2004?
Jan 23, 2013I have a drawing that was sent to me using Autodesk inventor 8 but I want to add it to a drawing I have already started in Mechanical Desktop 2004 is there any way to export the drawing into a format that can be opened by Mechanical Desktop 2004?
View 1 Replies View RelatedAutoCAD Inventor :: Autodesk 2012 Simulation Ultimate Crashes With Dell M6500
Mar 17, 2013I am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies View RelatedAutoCAD Inventor :: Shaded View With Edges Is Disabled In Dynamic Simulation Autodesk 2012
Dec 5, 2013I am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies View RelatedAutoCAD 2013 :: How To Install Mechanical Without Autodesk 360
Dec 6, 2013Working on Autocad 2013 Mechanical. I ALWAYS have the Autodesk 360 SignIn objects on the top bar. I have disabled the Autodesk 360 from the installation list in the network deployment. But this doesn't work. I have also modified the registry and the .ini files but it seems NOTHING works! How can I install AutoCAD in silent mode without getting these objects on the top bar?
View 4 Replies View RelatedAutoCAD Inventor :: Using IV Simulation FEA Results As Loads In A New Simulation
Nov 29, 2011IV 2011.
I have an assembly with a FEA simulation result. I can run a report and get the reaction forces and moments at each constraint. I would like to run a new simulation with different constraints and use the reaction results from the first simulation as loads in the second one.
Currently I do this by running a report on the 1st simulation to get a table of the reaction results. I then manually add those forces to the 2nd simulation. This takes time to type and the forces must be edited each time I re-run the 1st simulation.
Is there a way to use parameters to automate this?
AutoCAD Print / Plot :: Autodesk Mechanical Not Printing On HP Designjet 500 24
Oct 12, 2012I have a problem with print from Autodesk Mechanical on a HP Designjet 500 24.
The system is a Windows 7 Professional 64bit.
When I select the printer, the printer returns to "none".
I have tried several drivers, the HP Designjet 500 plus 24 or HP DesignJet 500 24+HPGL2 card.
I can select the HP DesignJet 500 24+HPGL2 card, but since that driver is incorrect for my printer, it doesn't print.
I have found this same problem for a HP Designjet T610.
Here is says to use a driver version from 10 feb 2010 or later. But there isn't any driver around or after this date for the HP Designjet 500.
Other program's can print just fine through the original HP Designjet 500 24 driver.
AutoCAD 2013 :: Adding Save As Option To Mechanical For Autodesk Lt 2008?
Oct 28, 2013I am using AutoCAD Mechanical 2013 and need to save a file as an AutoCAD LT 2008 for a friend to work in. I can only save it as AutoCAD LT 2004, is there a way for me to add AutoCAD LT 2008 as an option? If not is there a compatibility pack for him that he can download. There was a slight issue in the transfer. Im not doing anything that uses the mechanical features, just normal autocad features. The option for my computer is better if it is possible.
View 1 Replies View RelatedAutoCAD Inventor :: Alternative Packages Not Recognising Spline
Jan 23, 2013I am drawing an airfoil profile in Inventor for use in a CFD package. I have a system of points which I am plotting and connecting via the spline function and extruding them to form my blade profile. However, when I open the drawing in the CFD programme, it is recognising the spline as a series of straight lines instead of one continuous enclosed shape. The CFD programme I am using require a negative (i.e a solid drawing of where fluid is flowing). I have attached the inventor file I have created.
View 3 Replies View RelatedAutoCAD Inventor :: Bundle Diameter (AIP)
Sep 3, 2004In Cable and Wire harness in AIP is there a way I can extract or dimension abundle diameter that is associative with the model? I was expecting that Ican dimension the diameter sizes in the nailboard drawing.
View 2 Replies View RelatedAutoCAD Inventor :: Translation Of DWG - Mechanical Desktop Must Be Installed
May 1, 2013I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View RelatedAutoCAD Inventor :: How To Translate Model From Mechanical Desktop
Aug 25, 2013How to Translate the model from Mechanical Desktopt in Inventor 2014.
Program requires installed mechanical desktop.
How to tranalate without having mechanical desktop?
AutoCAD Inventor :: Converting Step Files For Mechanical Desktop?
Feb 7, 2012I have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
AutoCAD Inventor :: How To Convert MDT 2008 Files To Mechanical 2013
Sep 5, 2012We need to be able to open MDT 2008 3D drawings in Autodesk Mechanical 2013.
I also would like to know if there is a way to convert a lot of files? (like using a batch or something similar)
AutoCAD Inventor :: Can Mechanical Desktop 2009 Be Installed With 2013
Jul 9, 2013Can Mechanical Desktop 2009 be installed with Inventor 2013?
View 5 Replies View RelatedAutoCAD Inventor :: Adding Material Library Accessible In Simulate Mechanical
Jun 6, 2013How I can add materials to the Inventor material library. I have created and defined the material in Autodesk Simulate Mechanical and they are available in the material libraries in that program, but inaccessible in Inventor. It doubles my work load if i need to define the materials in both programs and also creates hassles if a change needs to be made to a single material.
The materials are currently saved in .mlb library files. Iventor requests a .asklib file for when trying to add a library.
AutoCAD Inventor :: Mechanical Desktop 2013 Error At The Start Of Application
Apr 27, 2013When I start the subject application, I experience delay in opening the program & error as attached appars on sreen.
View 1 Replies View RelatedAutoCAD Inventor :: 2009 Crashing When Translating Mechanical Desktop Files
Dec 22, 2011.My Inventor2009 keep crashing everytime i'm trying to traslate/import Mech. Desktop2009 files....Windows7 is my os platform. Done all latest SP both for Inventor & Mech Desktop.
View 1 Replies View RelatedAutoCAD Inventor :: Mechanical Desktop Part / Assembly Translator Not Registered
Oct 11, 2011I am trying to import my MDT 2009 (SP3) files into Inventor 2012 (SP1) but I get the error in the subject line.
View 9 Replies View RelatedAutoCAD 2013 :: How To Import Mechanical Desktop 2009 Files Into Inventor 2012
Sep 23, 2013how to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies View RelatedAutoCad :: How Packages Can Be Linked To Other Software
Nov 14, 2011Describe the advantages and of producing drawings electronically using CAD compared to manual drawings and sketching. When describing the CAD packages used in architecture, mention how they can be linked to other software that can aid the design process of construction.
I've done the first part, not so sure about the second part:
" When describing the CAD packages used in architecture, mention how they can be linked to other software that can aid the design process of construction."
AutoCAD Inventor :: FEA Simulation Area
Dec 11, 2013I've created a successful FEA simulation in Inventor 2014 and obtained results. But I want to see the highest stress in a defined area that is smaller than the entire part (I have some stress concentrations that are throwing off my 'max'). Is there a way to probe an area instead of just a point? I'm tired of creating a dozen probes to find the 'local max'.
View 8 Replies View RelatedAutoCAD Inventor :: One Way Rotation Simulation
Jan 23, 2013How to create or how to set a one way rotation joint as a one way bearing will work on real life, is this possible?
View 9 Replies View RelatedAutoCAD Inventor :: Simulation Results In API?
Apr 30, 2012I'm developing a program which runs several simulations and obtains the results automatically.
I'm using the dynamic simulation API created in Inventor 2013. For that I use the GetResultValues(ByRef values() as Double) method of the class DSResult.
I used the method inside the VBA of inventor and worked well. But when I wrote the program in Visual Basic Express 2010, the method doesn't return anything.
I share an excerpt of the
Dim odoc As AssemblyDocument
odoc=invApp.Documents.Open(testPath, True)
Dim dsman As Inventor.SimulationManager = odoc.ComponentDefinition.SimulationManager
Dim dssim As Inventor.DynamicSimulation = dsman.DynamicSimulations.Item(1)
Dim oJoints As Inventor.DSJoints = dssim.DSJoints
oJoint = oJoints.Item(1)
[code]....
The method GetResultValues(values) should modify 'values' to a time,value vector.
It works well inside Inventor, but doesn't in the program in VB, although it runs the simulations and does everything else right.
AutoCAD Inventor :: How To Use Dynamic Simulation For Nut And Bolt
Oct 5, 2013How to use dynamic simulation, i am creating a bench vise and woud like to animate it going in and out how would i do that?
View 1 Replies View RelatedAutoCAD Inventor :: Suppressing Features In Simulation
Sep 29, 2011when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?
AutoCAD Inventor :: Gravity Experiment Simulation
Oct 30, 2012Is this type of gravity experiment possible with dynamic simulation?
[URL].........
I made the cone ramp and double cone but the cone either goes the wrong way or only moves a few inches in the correct direction and then gets stuck. I’m using 3D Contact Joints and Spatial Joints and Gravity Force.
Version = Inventor Pro 2009
AutoCAD Inventor :: Dynamic Simulation - How To Add New Load Using API
Dec 11, 2013I am trying to discover the dynamic simulation, so I need to know is that possible to create a new Load(Torque, Force) using API?
View 2 Replies View RelatedAutoCAD Inventor :: Motion / Simulation Settings
Jul 13, 2012i'm developing a hexapod robot and i want to simulate the motion of the robot's leg. The mechanical of robot's leg contain a servo motor that variate your angle between 0 to 330 degre. How can i delimite the angle of servo's rotation?
Other questions, is about the fixation with bolts. How can i do for the motion simulation respect the connection of the bolt? when i do a dynamical simulation the parts that contain bolts don't stay joints, i have to do a rule of fixation with constrains?
AutoCAD Inventor :: Dynamic Simulation Atomization In API?
Apr 10, 2012I'm designing multiple elements for a vehicle. I need to evaluate multiple dynamic results of multiple possible designs. All the design is parametric so it modifies quickly but I can't find a way to run the dynamic simulation multiple times automatically and get the results from the output grapher for each simulation.
I am trying to do it via API but can't find the class of the dynamic simulation environment in the Object Model Chart to program it via .NET.
AutoCAD Inventor :: Dynamic Simulation Menu
Sep 26, 2012I have installed inventor 2011 on my laptop, but the dynamic simulation menu does not appear even though I 've been many times to install it.
View 9 Replies View Related