AutoCAD Inventor :: Shaded View With Edges Is Disabled In Dynamic Simulation Autodesk 2012
Dec 5, 2013I am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies
ADVERTISEMENT
AutoCAD Inventor :: Autodesk 2012 Simulation Ultimate Crashes With Dell M6500
Mar 17, 2013I am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies View RelatedAutoCAD Inventor :: Shaded With Edges Always On?
Jun 5, 2012How can you set by default the ''shades with edges'' visual style by default ? I always work with that visual style, I have to set it every time I open a part or assembly.
View 2 Replies View RelatedPhotoshop :: CS6 / View > Show > Selection Edges Option Appears Disabled?
Jan 31, 2013I use PS CS6 for Windows. When I select a layer by mean of Ctrl-Click on layers palette, selection edges is not shown. When I go to menu View > Show > Selection Edges i realize that option is disabled.
View 2 Replies View RelatedAutoCAD Inventor :: Shaded With Hidden Edges
Jun 20, 2013We just switched from 2013 to 2014. I had "Shaded with Hidden Edges hotkeys to "q" in 2013,but now it's not in the
Customize menu anymore? "Shaded with Edges," is there, and my filter is set to all. I would like to have my hotkey back.
Menu: Tools/Customize/Keyboard
AutoCAD Inventor :: Shaded With Edges (not Hidden)
Apr 23, 2013Inventor 2014,
I am getting display of hidden edges (in fuzzy grey with shadows, like wireframe with hidden edges) while using shaded with Edges. At first they don't display, but when I pan zoom orbit, they show up to stay. When I switch to shaded with hidded edges, the same edges turn blue. When I switch to shaded, they completely disappear. So it's the Shaded with edges view that has this problem. I have also noticed it to be random files or some unknown commonality. Files were created using Inventor 2013. I'm not running Express mode, which is much fuzzier.
I did not see this during beta testing. I have a Radeon HD 5990 (2GB) - running like a champ, Intel I7- 930, and 12GB ram running Windows 7 (ultimate) 64bit. Inventor 2013, and 2014 are both installed.
AutoCAD Inventor :: Unable To Remove Hidden Line From View To Get Shaded View
Sep 23, 2013I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
AutoCAD Inventor :: 2013 - Realistic Versus Shaded With Edges
Jul 25, 2012How do I get my part to be transparent in the "Realistic" view like it is with the"Shaded with edges"? This is what it looks like with the view style set to "Shaded with Edges". Notice how it is transparent and you can see thru the part.
Now when I switch to "Realistic", I get this. Anything that is behind this part is not visible.
I want to be able to see thru the part when in the reallistic visual style.
AutoCAD Inventor :: ILogic Code For Visual Styles - Shaded With Edges
Aug 24, 2012Would like to have this script in my template for assemblies. So when user opens up the assembly it changes the visual style automatically.
View 2 Replies View RelatedAutoCAD Inventor :: Assembly / Presentation As DWG With Visual Style Of Shaded With Edges?
Mar 22, 2013Is it possible to have an Assembly and/or Presentation as a drawing (.dwg) with a Visual Style of Shaded with Edges? In particular my black .ipt parts look just fine with white/grey edges except when placing the view in a drawing.
View 8 Replies View RelatedAutoCAD Inventor :: How To Use Dynamic Simulation For Nut And Bolt
Oct 5, 2013How to use dynamic simulation, i am creating a bench vise and woud like to animate it going in and out how would i do that?
View 1 Replies View RelatedAutoCAD Inventor :: Dynamic Simulation - How To Add New Load Using API
Dec 11, 2013I am trying to discover the dynamic simulation, so I need to know is that possible to create a new Load(Torque, Force) using API?
View 2 Replies View RelatedAutoCAD Inventor :: Dynamic Simulation Atomization In API?
Apr 10, 2012I'm designing multiple elements for a vehicle. I need to evaluate multiple dynamic results of multiple possible designs. All the design is parametric so it modifies quickly but I can't find a way to run the dynamic simulation multiple times automatically and get the results from the output grapher for each simulation.
I am trying to do it via API but can't find the class of the dynamic simulation environment in the Object Model Chart to program it via .NET.
AutoCAD Inventor :: Dynamic Simulation Menu
Sep 26, 2012I have installed inventor 2011 on my laptop, but the dynamic simulation menu does not appear even though I 've been many times to install it.
View 9 Replies View RelatedAutoCAD Inventor :: Using Trace In Dynamic Simulation
May 25, 2013I am playing with traces in dynamic simulation and in the output grapher i get values for position like:
P
P(x)
P(y)
P(z)
and in the graph i get some values of the position but i am unsure on where the datum is at this point. I would of thought that the datum would be where the trace is attached? Where the datum is based and is it possible to set a relative datum to when the trace is set?
AutoCAD Inventor :: Dynamic Pressure Simulation
Mar 20, 2012I have a question regarding simulations in Autodesk Inventor.
For example I have such part:
It is a plug made out of brass. I want to test if it will be able to withstand specified pressure. So I set up where is it constrained - on thread.
And set up pressure from inside on the cap to be 16 bar (1,6 MPa). And also assign materials. And there goes simulation . Everything seems alright. I want to run little bit different analysis. When pressure would be variable.
For example I will have pressure going from 12 bar to 16 bar, and such simulation will be running for quiet long time (as an example pressure will be 12 then raises to 16 then goes to 12 again and then raises to 16 again). I want to know after what time will this plug fail and will be destroyed? I mean i want to know when METAL will get tired and will be destroyed? I was just wondering if such a simulation is possible to be made in Autodesk Inventor?
AutoCAD Inventor :: Dynamic Stress Simulation
Oct 14, 2012is their a possibility to applay stress like dynamic i have a shaft that has a pully on it , its conectet on an old way
not with a tight fit so it shrinks on it but it works wit a small cut in the shaft where its bolted with just a tiny metal plate.
at this place will be a stress concentration and i wanne see how the noth effect is when their is a dynamic load on it cause if i put a static load on it i know the shaft can handel it but i real life it has broken couple of times so this is what i want to investigate.
AutoCAD Inventor :: Difference In Dynamic Simulation
Jul 25, 2013why there is huge difference in Dynamic Simulation results when you use two different input methods? I used input grapher and in linear ramp, I entered input (time/ distance) manually for 6 points and ran simulation. Then I used Spline and used a text file to enter SAME data and it gave me at least 10 times different results. Can't figure out why this difference. This changes my entire design.
View 3 Replies View RelatedAutoCAD Inventor :: Shaded View In IDW
Jan 10, 2013When shading in an Inventor 2013 idw the display shows the shade incorrectly as some kind of sky representation (see attached). I wish for this to be displayed correctly as a grayscale shade?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Dynamic Simulation / Parameter Value Is Out Of Bounds
Dec 13, 2011I have a dynamic simulation which seems to have corrupted itself. I have a number of Revolution joints which are torsional springs. I’ve enabled joint torque and set a spring stiffness and a free position (+15 deg). Then on the ‘initial condition’ page I’ve set Max (+45 deg) and Min(-15 deg) Bounds on rotation angle and set a stiffness 10x the spring stiffness to simulate the end stops of my torsional spring. The initial position is +12 deg. This was working just fine but since I’ve added a couple more parts (nowhere near these springs) I constantly get the message “The parameter xxx value is out of bounds”. Where xxx is the ‘Initial position’ of the joint. If I edit the joint and untick the Bounds section the message goes away but if I tick it (which I need for my simulation) I get the error message as soon as I pick OK. The position is NOT out of bounds?
View 4 Replies View RelatedAutoCAD Inventor :: Rebound Of Ball - Dynamic Simulation
Jul 24, 2013How to simulate rebound of a ball over inner surface of polyhedral body. (In gravity field). How to get all trajectory for given time interval.
And is it possible to get movie of falling of several balls onto the surface in Inventor Dynamic Simulator?
AutoCAD Inventor :: 2 Axis Robot Dynamic Simulation
May 7, 2013I am working on 2 Axis Robot dynamic Simulation. It is suppose to lift weight up by 22" travel horizontally and bring down 22". My input is positions (I noted down angles at four corners for both arms and used them in Input Imposed Motion.) In the simulaiton run, movement is not in a straight line. It kinda moves in a curve. How can I get it perfectly straight.
View 9 Replies View RelatedAutoCAD Inventor :: Visual Style - Dynamic Simulation
Aug 19, 2013I like "Shaded with edges", and I want the edges black. I have set up the display to this setting in Application Options, Display tab (Use application Settings), and Settings button. Excellent, that's nice. (I have also mapped the num pad 6 to that style, along with 5 is Shaded with hidden edges, and 4 is wire frame).
However, In Inventor 2014 Dynamic simulation, the visual style defaults to "Shaded" (no edges). Ok, i can live with that, I guess. I'll just hit NumPad 6 and it looks good again.
Ctrl-Tab to another open file, make a change or two, come back to the DynSim and - hang on, where are my edges? I can just hit 6 again, but should I have to? I haven't ever seen this display property changed when changing between files before.
AutoCAD Inventor :: Dynamic Simulation To Stress Analysis?
Jul 8, 2013I am having problems creating a Stress Analysis Report from the Dynamic Simulation on this assembly.
My goal is to show the cam shaft rotating at 3500 rpm, and the stress it creates. I am looking to show the stress concentrations at the fasteners as well as the rotating components, the cam will have a torque of 15 ft lb, with a counter torque of the compressor equal to that.
I have been working through Wasim Younis' Book for Inventor 2014, but seem to be coming up short in its application.
I am using Inventor Professional 2014.
Autodesk Inventor 2013 Certified Professional
Autodesk Product Design Suite, Ultimate 2013
AutoCAD Inventor :: Dynamic Simulation - Ball On Track
Sep 24, 2013Within dynamic simulation, I am trying to have a ball follow a track made of (2) rods, I can do it if the rods are straight but I do not know how to properly apply joints to allow the ball to follow the tracks when they are turning. I need to do this within dynamic simulation because I also hope to add a chain and sprockets with a ball holder to bring the ball back up to the top.
View 7 Replies View RelatedAutoCAD Inventor :: Dynamic Simulation With A Non-rigid Body
Jul 30, 2013I still don't know how to simulate the following :
My system is basically a clamping device that works with a cam and a metal plate. When loose, the metal plate remains straight :
When clamped, the metal plate bends like so :
As far as I know, the Dynamic Simulation Tool can work with rigid body parts and you later export the simulation to the FEM Tool. I thought I could use a spring-link that would behave like the metal plate but I must admit I don't know the relationship between the stiffness of a spring and the elasticity of a metal plate.
AutoCAD Inventor :: Dynamic Simulation - Trace 2D Contact
Apr 3, 2013I am using Invertor Dynamic Simulation and I need to know the 2D contact position data to be displayed in the output grapher (i.e. the x,y,z coordinates). Only the forces are computed in the output grapher. I’ve tried using the “trace” feature but this will not allow me trace the 2D contact point. It would even benefit me to know the angle of the normal force relative to the absolute frame.
View 2 Replies View RelatedAutoCAD Inventor :: Running Dynamic Simulation On Assembly
Feb 18, 2013I am running Autodesk Inventor Pro 2012 and am trying to start learning to use my dynamic simulation and FEA features. I recently just purchased the Up and Running series by Wasim Younis. I was working with his models on the multiple actuating jacks and noticed none of the features are constrained in the assembly. Now my question is, is this how these should always be setup? I am working on trying to set up a simulation of a frame I am rotating 90degrees with 2 hydraulic cylinders working together so as to use the strong side of each of the cylinderds when it goes each direction. The way I have it set up I have the whole thing constrained. The 2 cylinders are constrained so that they have their stroke 17.23" and the turntable frame is constrained to rotate 90degrees. So should I remove all constraints to run dynamic simulation? I attatched 2 photos to show the starting position (travel position) and ending position (working position).
View 7 Replies View RelatedAutoCAD Inventor :: Lighting Shaded View
Oct 31, 2007when you have an view in shaded mode, there is automatically some lighting from the rightside. This gives the model/view some shadow look ( white turns into light gray by example).
The lightning style in the assembly/part environment has no influence on the shaded view.
AutoCAD Inventor :: Possible To Have Multiple Dynamic Simulation States For Assembly
Apr 3, 2012Is it possible to have multiple dynamic simulation states for an assembly, the same way that the Studio environment can have multiple animations, or do I have to create a separate assembly file for each one?
Also, is it possible to save the animation from my dynamic simulation results for later use in Studio without having to re-run the simulation each time the file is re-opened?
I'm using Inventor Pro 2012
-Using Autodesk Inventor Professional 2012
AutoCAD Inventor :: Dynamic Simulation - Use Spring Joint Or Force?
Jan 28, 2013I'm designing a hinged cover for something right now that will use a pair of gas extension springs for assisted opening. I'm currently working to figure out how much force it will take to open the cover using different values of spring - it's available in 50, 100, 150, 200, etc., lb versions.
I've tried running simulations using a force applied to the moving end of the gas spring, and I've trued running simulations using a spring joint applied between the fixed and and the moving end of the gas spring, and I'm getting dramatically different results between the two. For instance, using a 200 lb force shows me that I need about 25 extra lbs of force applied to the handle of the cover to open it, where when I use that same 200 lbs on a spring joint, I need 50-75 lbs to keep the cover closed, because it will open on its own.
