AutoCAD Inventor :: Autodesk 2012 Simulation Ultimate Crashes With Dell M6500
Mar 17, 2013
I am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies
ADVERTISEMENT
Dec 5, 2013
I am not able to see the model in shaded view with edges in dynamic simulation environment (Autodesk Inventor 2012).
View 6 Replies
View Related
Aug 12, 2013
We facing the error shown in screenshot attached with this mail.
We are not able to read content centre.
I also check the path "C:ProgramDataAutodeskInventor 2013Content CenterLibraries" and found that its a empty.
We are using :
Software : Inventor 2012 Professional ultimate edition, MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
OS: Winxp (1 user )and win7(3 user)
the path to download these content centre files for inventor 2012.
View 1 Replies
View Related
Jun 21, 2012
Does Autodesk Simulation Mechanical bundle with any of the Inventor packages?
View 1 Replies
View Related
May 30, 2012
Below is my test procedure for "Create Curve Mesh Element" by Inventor simulation 2012.
1. I made a box 100(W)X100(D)X20(H) with 2xR20 (mm) fillets at the opposite edges.
2. I copied a box I made for making 2 type mesh.
3. I made mesh on the box without "Create Curved Mesh Elements" option.
Node number: 2374
Element number: 1365
4. I made mesh another model with "Create Curved Mesh Elements" option.
Node number: 2374 (same number, not increase)
Element number: 1365
Mesh shape is different(please refere attachiment jpeg file).
I think that "Create Curved Mesh Element option" is not for making second tetrahedron elements.But I cnanot the true porpose of "Create Curved Mesh Elements" option.For only P method, not H method?
View 1 Replies
View Related
Nov 29, 2011
IV 2011.
I have an assembly with a FEA simulation result. I can run a report and get the reaction forces and moments at each constraint. I would like to run a new simulation with different constraints and use the reaction results from the first simulation as loads in the second one.
Currently I do this by running a report on the 1st simulation to get a table of the reaction results. I then manually add those forces to the 2nd simulation. This takes time to type and the forces must be edited each time I re-run the 1st simulation.
Is there a way to use parameters to automate this?
View 2 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Apr 17, 2012
I opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
View 6 Replies
View Related
Feb 3, 2012
I can't to change colour scheme autodesk inventor 2012
View 2 Replies
View Related
Apr 19, 2012
I wanted to go through all of the Essentials videos for Inventor (URL... ) but every single link listed for the Essentials is broken. Is there another place I can find them?
View 3 Replies
View Related
Jun 19, 2013
Recently installed 2013, previously had 2011inv. Trying to find out exactly what the constraint changes are from 2011 to 2012 inv. I as told that there was a post here with them, but cannot find it (only posts of constraint problems that people were having when they switched to 2012).
what the changes are from inv2011 to 2012 or inv2011 to 2013. Doesn't autodesk have these changes listed somewhere in writting?
View 4 Replies
View Related
Nov 1, 2011
Autodesk Inventor Professional 2011 will crash when we try open a 3D model (Inventor Component) as a Baseline View for a new "Drawing" file.
To replicate the error, we draw a simple Circle and extrude it so it is then a 3D Model. We then create a new "Drawing" file, click the Baseline View button at the top left, and then select the 3D Model Inventor file (the extruded circle). The program crashes and we get the following error from Autodesk Software, NOT Windows.
dumpdata.zip
dumpuserinfo.xml
Inventor11101152546.dmp
Version: 150239000 AIP
This is for our college... students need to perform this action for their exam. We have had success using the same software and OS configuration, along with the same steps listed above, on different machines on campus. Not sure what is causing the error on these machines.
View 2 Replies
View Related
Jul 23, 2012
Experts, how do I get a list of all internal iproperty names in Autodesk Inventor 2012
View 1 Replies
View Related
Jun 10, 2012
While displaying animation in autodesk inventor 2012, inventor window get frozen. Is there any solution to this problem like onIdle event where we can do the calculation for what next animation shown?
View 2 Replies
View Related
Mar 16, 2012
Whenever I try to open jpeg files larger than 2MB PSP 4 crashes.
The files open fine in PSP 3
View 4 Replies
View Related
Oct 22, 2013
After installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies
View Related
Feb 14, 2012
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies
View Related
Sep 25, 2012
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
View 4 Replies
View Related
Jul 26, 2011
I have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
View 9 Replies
View Related
Aug 26, 2011
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies
View Related
Apr 6, 2012
AutoCAD C3D 2012 has been crashing nonstop over the past 3 days on me whenever I try to "Create a Feature Line from Object". I know that it is a localized problem as a co-worker has been in the same drawing and done grading work without any problems. The error has occurred in multiple drawings.
Product Version: F.107.0.0. AutoCAD Civil 3D 2012 SP1
View 3 Replies
View Related
Jun 24, 2012
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies
View Related
Feb 28, 2013
We are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
View 4 Replies
View Related
Apr 22, 2011
I frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies
View Related
Dec 23, 2011
Every time we have the file dialog boxes open and try renaming or any other explore action beyond changing folder location and hitting the save button AutoCAD LT will hang and crash. We have tried starting the file operation and then just canceling and it does the same exact thing. What happens most of the time is the user will be working on a file and need to save it. They click save as and will go into the folder and right click and rename an existing file to a backup name and then hit save. It proceeds to crash instantly and the document doesn't get saved. It doesn't seem to matter the name of the file or folders or if it is a rename or delete operation. It seems to be related to bring up the explorer options within AutoCad honestly. All of our computers do the same thing.
View 9 Replies
View Related
Oct 12, 2011
When I connect with Autocad Map to WMS server (Geoserver) and try to choose Server CS, Autocad crashes. This didn't happen until 2012, and in 2011 work just fine.
View 1 Replies
View Related
Apr 26, 2012
I created and replaced a dwt in 2013. tried opening it in 2012 and it crashes with a "fatal error: unhandled access violation writing 0xec307ff8 exception at ec307ff8h". I restored to whole folder with our dwts to before I created them. and still crashes with 2012. they open fine in 2013.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 2 Replies
View Related
Sep 16, 2011
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
View 1 Replies
View Related
Feb 11, 2013
I am running Civil 3D 2012 and my Hydraflow crashes everytime I run an analysis. I am using a known Q and have input pipe inverts/slopes and pipe sizes. Everytime I try running an analysis I get the following message: Line 1, 2, 3 has no flow. Check pipe size(s) and slope(s). Then the program closes up.
View 1 Replies
View Related
Feb 8, 2012
We are running Autocad LT 2012 on the newest fastest souped-up Lenovo Thinkpad W520 available, with Windows 7. If I accidentally direct Autocad to print to a device that is not currently on-line it goes into "not responding" cycle and crashes.
View 1 Replies
View Related
Dec 4, 2012
When I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text:
Description
Faulting Application Path: C:Program FilesAutodeskAutoCAD Mechanical 2012AdRefMan.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: AdRefMan.exe
Application Version: 18.2.51.0
Application Timestamp: 4d4b63d1
Fault Module Name: AdRefMan.exe
Fault Module Version: 18.2.51.0
Fault Module Timestamp: 4d4b63d1
Exception c0000005
Exception Offset: 000000000003dc71
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1035
Additional Information 1: 9416
Additional Information 2: 9416e8b8865dfbe86f7b5b96c4331260
Additional Information 3: c86b
Additional Information 4: c86b8562f11a561a601a7649b1d675a3
View 3 Replies
View Related
