AutoCAD Map 3D :: Image Insert Crashes Program - 2012?
Sep 16, 2011
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
My program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.
I have a small logo jpg that was a Windows OLE object inserted into each drawing I do. This image was saved within the file.
It now appears that with 2012 LT I have to insert an image as a reference. Is there any way around using a linked file as I want to open these drawings without worrying about whether or not I have the logo file stored in the correct place.
latest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .
When I try to drag an image out of project bin to an image in the workspace my program crashes. I have reinstalled the program but still doing this. All updates are done and I'm at a loss as what to do.
I am a land surveyor and am looking for a routine that will look at my txt files exported from the field data collector, and upon exporting into C3D, will look at the descriptor and place an appropriate block on the node. For example, if the collector code was for an IP (iron pin), when the points are imported into the drawing, a solid round block would be placed on each node with the IP description. Same if for trees, concrete monuments, fire hydrants, etc.
I was trying to make a block of an elevation, no more than 150 objects and the program had a FATAL ERROR; I tryed again and again and always the same fatality.
I'm in Autocad if I use the "open" command and go to a file directory there are several subfolders that we have to save drawings in before we make changes to them. If I copy and paste from one folder to the next while in the open dialog box it copy the file fine but the next time I try to open any drawing file the program goes unresponsive and crashes.
I have a program where I am inserting blocks at specific points in model space. I have successfully been able to create a subroutine that will accept a block name, a point3D Location and a layer name and and insert the specified block at the specified location on the specified layer. What I need to do now is to cycle through model space and find all of the pipe objects in model space. I then find the endpoint of each pipe and insert a block at that location. The problem that I am having is that the program crashes when I try to find the objectid of modelspace. I am using the technique discussed in this thread by Jeffrey_H.
VB.NET Access to Styles
Below is the code that I am trying to get to work.
'Test Command to insert the some blocks into the drawing <CommandMethod("TrimbleTestBlocks")> _ Public Sub TrimbleTestBlocks() 'Get the editor object Dim doc = AcApp.DocumentManager.MdiActiveDocument Dim db =
[Code]....
This is the line that crashes on me
'Get Model Space Block Table Record Dim mdlspace As BlockTableRecord = SymbolUtilityServices.GetBlockModelSpaceId(db).GetObject(OpenMode.ForRead)
why this is crashing the program? I just started programming dotnet this weekend and my head is starting to explode.
My end goal is to cycle through every pipe in model space. If the pipe belongs to a specified system definition then find the pipe size and insert a corresponding block on the endpoint of the pipe. I then want to export the blocks to a new drawing to be imported into a trimble unit for locating inserts on a deck.
How do I insert multiple pages from AC2012 LT into PDF?
I'd like to make several drawings * see attachment* , add in the text.....add in some jpgs.....and have ONE document with multiple pages for my customers.
So far I can only seem to make one page at a time. Operator error I am sure.
I created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.
I want to insert a text into a block that contains a field. The field I want to look up the value of an attribute that is also contained in the block. Now when I have this complete and then change the block attribute the fields do not update to the new value of the attribute. An example file is attached.
Now I am open to creating the block in a different way, so any way to make this concept work? I want everything to be contained in the block.
I already tried to work around my problem by making 2 separate attributes, where the 2nd attribute contains the field that looks up the value of the 1st attribute - this did not work. Another thing I tried was after the block was made, I edit the 2nd attribute by inserting the field and this worked fine - the down side is that the field is not the default of the attribute (so the block must already be present in the drawing model space and that instance must be copied to make more).
s3 = New DimStyleTableRecords3.CopyFrom(vz)s3.Name = nazovtst.Add(s3)_trans.AddNewlyCreatedDBObject(s3, True) _trans.Commit()
Then, in another part of the code, I open the new style and change a property:
Using trans As Transaction = db.TransactionManager.StartTransaction ds = trans.GetObject(ds.ObjectId, OpenMode.ForWrite) ds.Dimtxsty = s2TextStyle.ObjectId trans.Commit() End Using
this works OK for the first time, but when I run the code again, I don't create the new style, I just take the existing one and changing the Dimtxtsty property to the value it already has causes AutoCAD crash
I have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
AutoCAD C3D 2012 has been crashing nonstop over the past 3 days on me whenever I try to "Create a Feature Line from Object". I know that it is a localized problem as a co-worker has been in the same drawing and done grading work without any problems. The error has occurred in multiple drawings.
Product Version: F.107.0.0. AutoCAD Civil 3D 2012 SP1
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
We are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
Every time we have the file dialog boxes open and try renaming or any other explore action beyond changing folder location and hitting the save button AutoCAD LT will hang and crash. We have tried starting the file operation and then just canceling and it does the same exact thing. What happens most of the time is the user will be working on a file and need to save it. They click save as and will go into the folder and right click and rename an existing file to a backup name and then hit save. It proceeds to crash instantly and the document doesn't get saved. It doesn't seem to matter the name of the file or folders or if it is a rename or delete operation. It seems to be related to bring up the explorer options within AutoCad honestly. All of our computers do the same thing.
When I connect with Autocad Map to WMS server (Geoserver) and try to choose Server CS, Autocad crashes. This didn't happen until 2012, and in 2011 work just fine.
I created and replaced a dwt in 2013. tried opening it in 2012 and it crashes with a "fatal error: unhandled access violation writing 0xec307ff8 exception at ec307ff8h". I restored to whole folder with our dwts to before I created them. and still crashes with 2012. they open fine in 2013.
Dell t1500 i7 8 gb ram Windows 7 64 bit ati firepro v4800
I am running Civil 3D 2012 and my Hydraflow crashes everytime I run an analysis. I am using a known Q and have input pipe inverts/slopes and pipe sizes. Everytime I try running an analysis I get the following message: Line 1, 2, 3 has no flow. Check pipe size(s) and slope(s). Then the program closes up.
We are running Autocad LT 2012 on the newest fastest souped-up Lenovo Thinkpad W520 available, with Windows 7. If I accidentally direct Autocad to print to a device that is not currently on-line it goes into "not responding" cycle and crashes.
We installed ACA 2012 a few weeks ago on computers running Windows Vista Business 64-bit. On one of our machines, the Detail Component Manager was working fine and now when we go to insert an object the insertion fails with a *cancel* appearing on the command line.
I have checked all of the file paths and folder permissions and everything is fine. Microsoft.Net Framework 4 Client & Extended is installed as along with Microsoft.Net Framework 3.5 SP1.
When I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text: