I'm in Autocad if I use the "open" command and go to a file directory there are several subfolders that we have to save drawings in before we make changes to them. If I copy and paste from one folder to the next while in the open dialog box it copy the file fine but the next time I try to open any drawing file the program goes unresponsive and crashes.
View 3 Replies
Each time I attempt to import a USGS .adf file the program becomes unresponsive and locks up
approx 450,000KB in size
I was trying to make a block of an elevation, no more than 150 objects and the program had a FATAL ERROR; I tryed again and again and always the same fatality.
I'm using AutoCAD LT 2007
I have a program where I am inserting blocks at specific points in model space. I have successfully been able to create a subroutine that will accept a block name, a point3D Location and a layer name and and insert the specified block at the specified location on the specified layer. What I need to do now is to cycle through model space and find all of the pipe objects in model space. I then find the endpoint of each pipe and insert a block at that location. The problem that I am having is that the program crashes when I try to find the objectid of modelspace. I am using the technique discussed in this thread by Jeffrey_H.
VB.NET Access to Styles
Below is the code that I am trying to get to work.
'Test Command to insert the some blocks into the drawing <CommandMethod("TrimbleTestBlocks")> _ Public Sub TrimbleTestBlocks() 'Get the editor object Dim doc = AcApp.DocumentManager.MdiActiveDocument Dim db =
[Code]....
This is the line that crashes on me
'Get Model Space Block Table Record Dim mdlspace As BlockTableRecord = SymbolUtilityServices.GetBlockModelSpaceId(db).GetObject(OpenMode.ForRead)
why this is crashing the program? I just started programming dotnet this weekend and my head is starting to explode.
My end goal is to cycle through every pipe in model space. If the pipe belongs to a specified system definition then find the pipe size and insert a corresponding block on the endpoint of the pipe. I then want to export the blocks to a new drawing to be imported into a trimble unit for locating inserts on a deck.
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
View 1 Replies View RelatedIn my code, I create a copy of dimension style:
s3 = New DimStyleTableRecords3.CopyFrom(vz)s3.Name = nazovtst.Add(s3)_trans.AddNewlyCreatedDBObject(s3, True)
_trans.Commit()
Then, in another part of the code, I open the new style and change a property:
Using trans As Transaction = db.TransactionManager.StartTransaction ds = trans.GetObject(ds.ObjectId, OpenMode.ForWrite) ds.Dimtxsty = s2TextStyle.ObjectId trans.Commit() End Using
this works OK for the first time, but when I run the code again, I don't create the new style, I just take the existing one and changing the Dimtxtsty property to the value it already has causes AutoCAD crash
My program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.
View 3 Replies View RelatedAnytime I try to print from Lightroom 4.3 the program crashes. Why ?
View 2 Replies View RelatedAfter successfully using VideoStudio X2 for quite a while now, I’ve just updated VideoStudio X4.
My laptop meets the minimum specifications, however, I have just one problem with X4.
I can output to every file format including HD, but if I choose the 3D option, anaglyph or side by side, the program “crashes“.
I get 'the program has encountered an unspecified error and has stopped functioning' and 'the memory could not be read' errors. Both messages show 3 times each. The program will eventually close when I’ve OK’d all six messages.
I’ve tried different lengths of video, from short to long, but it makes no difference.
I don’t plan on doing loads of 3D videos, just the occasional short one for fun. Even though I find red/blue 3D video tiresome to watch, I would like to have a fully functioning program as everything else on X4 works like a dream.
I have a project with only photos (about 200) and 3 songs. Total length is about 16min. I have successfully created a .MPG (2.3GB) and .WMA (474MB) HD files.
My problem is when I create a MPEG-4 HD files. It kept crashing the program while "Creating File..."
Error message, "The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis."
I tried another project with photos and music only and encountered the same problem. Shortening the project yielded the same (one song and a few pictures).
I tried using "Custom" and using the HD settings resulted in the same error. Nothing works.
My patches are up to date. How to create Hi Def movie files that I can playback with and Apple computer (Quicktime).
I tried reinstalling, uninstalling, reinstalling, updating the graphics driver...
View 1 Replies View RelatedLightroom trial. Soft proof crashes program.
View 2 Replies View RelatedI was working on a very HI-res image when Paint Shop Pro X4 just quit. It just went away, no errors, nothing.
I can rescan the image, but it was a very large image and took lots of disk space.
Is this scanned in image still on my hard drive? If it is where do I find it, so I can delete it?
I'm making a layout of 2 inch squares, 20 wide and 5 tall, to make color swatches for matching a target color. I'm then taking a starting value and using the edit colors>blend vertically, and blend horizontally to blend the color in the direction I think it needs. But every three or so blends i make it crashes the program, and even when I save my progress it crashes half the time. its a simple file just 2 inch square with color files.
I'm using CS6 on a osx10.6.8 ALL other jobs I've been working on have been fine.
I was recently doing a job where I was tethered onto my Macbook Pro. I was using a layout overlay for the project as the images were going into a specific packaging layout. However, everytime I brought up the layout onto the monitor, the program would crash.
View 2 Replies View RelatedI have reinstalled this program 3 times arlready and the Auto Music feature still does not work? Every time i make a project and want to add some music off the Auto Music feature the whole program crashes instantly? I keep getting over and over again, Unspecified Error? Everything thing else works in the program except the Auto Music.
View 2 Replies View RelatedI have been running corel x5 for about 2 years now and all of a sudden I tried to open a new blank document and it crashed the program saying that Corel Draw has encountered a problem and needs to close??
View 3 Replies View RelatedWhen I open PE8 and click on organise on the organize/edit screen the program crashes.
View 1 Replies View RelatedI can add an audio to my slieshow. After that I cannot run the audio nor the slide show. the program crashes. I took screenshots of the error messages.
View 1 Replies View RelatedTrying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system.
View 1 Replies View RelatedI was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline.
View 4 Replies View Relatedlatest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .
View 2 Replies View RelatedI downloaded a trial copy of the Corel VideoStudio Pro X5 Ultra. Every time I click on the Create Video File button the program crashes. I get a message that the program must exit. Every time I try this, it crashes.
View 4 Replies View RelatedWhen I try to drag an image out of project bin to an image in the workspace my program crashes. I have reinstalled the program but still doing this. All updates are done and I'm at a loss as what to do.
View 5 Replies View RelatedWhenever I go to open up Adobe Photoshop (64bit or otherwise) it will load up for a second then crash the next. It doesn't give me error reason why only says it has stopped working and it can't detect a problem so it closes. I have tried to uninstall and reinstall the program but the Adobe Application Manager is also acting weird. When it is opened it freezes and soon crashes saying there is a "Download Error".
View 2 Replies View RelatedCant open the menu bar from the program AutoCAD for Mac 2013
View 1 Replies View RelatedThis issue has been an irritant for a few days and today is almost constant. When I do a quicksave the program hangs up and I get a Program Not Responding message. The panels all go white and the desktop is ghosted like there is a film across the screen and I have to wait 2-3 or more minutes for things to resolve.
View 9 Replies View RelatedEvery time I try to hatch a larger area, my AutoCAD 2013 program freezes and I need to close the program and restart it, losing anything I hadn't saved prior to the freeze. In addition, certain areas won't hatch because the program is telling me I have open boundaries which is not the case.
View 3 Replies View RelatedOpened AutoCAD LT 2012 on a home laptop which I have used multiple times. The mouse is unresponsive in the drawing space, regardless of paper or model space. I am missing my crosshairs and can't pan or zoom. I can click on menu's, ribbon, command prompt or otherwise as long as it is outside the normal workings space. I can not close a drawing unless I close the entire program. Finally, I have to click in the command prompt space in order to type a command. I tried rebooting and it appears my last resort may to repair or reinstall the software.
AutoCAD LT 2012
Windows 7
Dell Precision laptop
Logitech cordless mouse
I have a bunch of parts drawings created in LT 98 that I am now editing in LT 14. For the most part I haven't had issues. However, I have been having a big issue with the Text function. It doesn't matter if I am trying to enter new text (Multi or Single line), or if I try to edit the existing text. Either way, the program immediately locks up & will not snap out of it.
View 2 Replies View RelatedI installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.
What can I do to resolve this problem?
