Premiere Pro :: Import Function In V6 Won't Work - Crashes 90 Percent Of The Program
Jan 15, 2014
I was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline.
When the import dialogue box is open in Premiere Pro CC, I sometimes need to use the search box in the upper right-hand corner of the dialogue box. The system will allow me to enter a search term, but it will not do the search. I'm using Windows 8.1 64 bit. Are others experiencing the same problem?
Trying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system.
What to do when trying to import a jpeg photo through the media brower and PPCS6 crashes? It all started when the program crashed while I was editing. I installed an upgrade to CS6 and rebooted. After that I could not import photos into the project.
My printer told me to add 5% C 5% M and 5%Y to my 100%k channels as without it I can see the black comes out a little/touch fury on things like small thin text.
Is this the same on all other colors too? Eg. say 100% Cyan color, should I add 5% M, Y and K?
when trying to access/apply a layer style (like "stroke" or "bevel and emboss"), i get a "could not complete your request because of a program error." this just started.
In the project panel there are several different ways to search through all of your media to find specific clips. Is there anything similar for the timeline?
For example - I have a 30 minute sequence with 7 tracks of dialogue. Each clip of dialogue is labeled with a line number from a script. When a producer comes over and asks "Can you quickly go to line 416?"...I'd like to be able to quickly do that. Avid has a function where you can perform a find in the timeline for specific file names.
There appears to be a significant difference between the image in my Source monitor and my Programme monitor. About 2stops. Might not look much when scaled down, but conspicious when on full scale.
I have some MOV quicktime files that look fine in preview, when I move them over to program they get a letterbox around them. How can get the files to view in full frame in program?
After installing the trial version of Premeire Pro I've been trying to make a quick test video using an MP4 file on my computer. I've been able to successfully import this file into Premeire however I am unable to see this video in the Source Monitor and the Program Monitor (after having added it to a sequence). I've tried re-encoding the file in AVI and WMV formats however neither of these two worked either. I've also tried just bringing in JPG and PNG images and have be unsuccessfully in viewing these as well. I have however been able to export a still image using the Monitors. So far after about 3 hours of googling the only possible answer to this issue I have been able to find is that Premeire requires 2 seperate harddrives to work; However this seems inaccurate as the program has made no attempt to warn me or even check to see if the computer I am using it on had 2 hard drives during install and start up, nor do I remember seeing it in the listed minimum requirements on the Adobe website. I am more than happy to view a lower quality preview so long as I can actually see what I am doing before rendering in a higher quality.
After successfully using VideoStudio X2 for quite a while now, I’ve just updated VideoStudio X4.
My laptop meets the minimum specifications, however, I have just one problem with X4.
I can output to every file format including HD, but if I choose the 3D option, anaglyph or side by side, the program “crashes“.
I get 'the program has encountered an unspecified error and has stopped functioning' and 'the memory could not be read' errors. Both messages show 3 times each. The program will eventually close when I’ve OK’d all six messages.
I’ve tried different lengths of video, from short to long, but it makes no difference.
I don’t plan on doing loads of 3D videos, just the occasional short one for fun. Even though I find red/blue 3D video tiresome to watch, I would like to have a fully functioning program as everything else on X4 works like a dream.
I have a project with only photos (about 200) and 3 songs. Total length is about 16min. I have successfully created a .MPG (2.3GB) and .WMA (474MB) HD files.
My problem is when I create a MPEG-4 HD files. It kept crashing the program while "Creating File..."
Error message, "The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis."
I tried another project with photos and music only and encountered the same problem. Shortening the project yielded the same (one song and a few pictures).
I tried using "Custom" and using the HD settings resulted in the same error. Nothing works.
My patches are up to date. How to create Hi Def movie files that I can playback with and Apple computer (Quicktime).
I was trying to make a block of an elevation, no more than 150 objects and the program had a FATAL ERROR; I tryed again and again and always the same fatality.
I'm in Autocad if I use the "open" command and go to a file directory there are several subfolders that we have to save drawings in before we make changes to them. If I copy and paste from one folder to the next while in the open dialog box it copy the file fine but the next time I try to open any drawing file the program goes unresponsive and crashes.
I have a program where I am inserting blocks at specific points in model space. I have successfully been able to create a subroutine that will accept a block name, a point3D Location and a layer name and and insert the specified block at the specified location on the specified layer. What I need to do now is to cycle through model space and find all of the pipe objects in model space. I then find the endpoint of each pipe and insert a block at that location. The problem that I am having is that the program crashes when I try to find the objectid of modelspace. I am using the technique discussed in this thread by Jeffrey_H.
VB.NET Access to Styles
Below is the code that I am trying to get to work.
'Test Command to insert the some blocks into the drawing <CommandMethod("TrimbleTestBlocks")> _ Public Sub TrimbleTestBlocks() 'Get the editor object Dim doc = AcApp.DocumentManager.MdiActiveDocument Dim db =
[Code]....
This is the line that crashes on me
'Get Model Space Block Table Record Dim mdlspace As BlockTableRecord = SymbolUtilityServices.GetBlockModelSpaceId(db).GetObject(OpenMode.ForRead)
why this is crashing the program? I just started programming dotnet this weekend and my head is starting to explode.
My end goal is to cycle through every pipe in model space. If the pipe belongs to a specified system definition then find the pipe size and insert a corresponding block on the endpoint of the pipe. I then want to export the blocks to a new drawing to be imported into a trimble unit for locating inserts on a deck.
I'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
Or - I remember that in FCP7 there is an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
I'm running Photoshop CC 14.1.1 on MacOSX 10.8.4 and I have the following problem:
The functionality 'Export for web' doesn't work and also it's not possible to open .png files. I've tried to delete the preferences 'Adobe Photoshop CC Settings' but that didn't seem to work.
CorelCad seems to match up fairly closely and exports nicely to my AutoCad LT 2011, mostly, but I can't seem to get the Export to CorelDesigner function to work. It goes through the conversion process, but the file never actually generates. I have the Trial version (registered).
Does CorelCad has an ALIGN object (entities) command?
After upgrading to Windows 7, the Editior function on my Photoshop Elements 6 program stopped working. I have tried the following: Run as Administrator. No success. Compatibility Troubleshoot. No success. Reinstalling. No Success.
I'll attach photo/photos and send them out through the "Share" email function through Outlook. The Outlook "sent" file shows that emails and pix go out, but they never arrive. Can I switch to GMail somehow?
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
I'm making a layout of 2 inch squares, 20 wide and 5 tall, to make color swatches for matching a target color. I'm then taking a starting value and using the edit colors>blend vertically, and blend horizontally to blend the color in the direction I think it needs. But every three or so blends i make it crashes the program, and even when I save my progress it crashes half the time. its a simple file just 2 inch square with color files.
I'm using CS6 on a osx10.6.8 ALL other jobs I've been working on have been fine.
