Lightroom :: When Try To Print From 4.3 The Program Crashes

Jan 28, 2013

Anytime I try to print from Lightroom 4.3 the program crashes. Why ?

View 2 Replies


ADVERTISEMENT

Lightroom :: Soft Proof Crashes Program

May 24, 2012

Lightroom trial. Soft proof crashes program.

View 2 Replies View Related

Lightroom :: Preventing Crashes To Program When Using Layout Overlay?

Dec 19, 2013

I was recently doing a job where I was tethered onto my Macbook Pro. I was using a layout overlay for the project as the images were going into a specific packaging layout. However, everytime I brought up the layout onto the monitor, the program would crash.

View 2 Replies View Related

Lightroom :: Import Images From SD Card As Copy To DNG And Crashes Program 3.6?

Dec 29, 2012

Trying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system.

View 1 Replies View Related

Lightroom :: Computer Crashes When Try To Print?

Aug 28, 2013

My computer crashes when I try to print to my Epson Photo R1800 printer from either light room 5 or photoshop CS5. I'm using a mac  with X.8.4.

View 1 Replies View Related

Lightroom :: Crashes When Entering Print Module

Feb 20, 2010

Whenever I try to enter the print module Windows tells me Lightroom has encountered a problem and needs to close. The print module worked fine some weeks ago, but now it doesn't. Everything else seems to work fine.

First thing I tried was to  relaunch and optimize my catalog which didn't work.

I then tried to reinstall LR 2.4 with no luck. I then Downloaded and installed 2.6, still no luck.

I had cleaned the registry after the print module worked last time, so I reloaded the registry with those values, still no luck.

I then deleted Lightroom 2 Preferences.agprefs and let LR relaunch to create a new one. Now the print module works.

As I am not using the default catalog I went into preferences and pointed LR to my catalogue and then relaunched again thinking the problem was solved. But when I tried to go into the Print module LR crashed again.

I figured that since the Print module worked with the empty default catalog the error must lie somewhere in my catalog. I therefore went back and tried using one of my backup catalogs, but LR crashed again when I tried to access the Print module. I even went back and tried all my backup catalogs and a couple of the oldest ones does not cause LR to crash when going into the Print module.

I'm on Vista with 4 gb of RAM, using dual monitors, and I've tried reducing the resolution and using only one screen as well.

So, my question is what could possibly go wrong inside a catalog file that would cause LR to crash in one module only? And why is it that the backups saved even the month before I last used the print module also causes the problem? Seeing as how I've been using that very same catalog and having a working print module?

View 6 Replies View Related

Lightroom :: 4.2 Crashes When Entering Print Module

Dec 12, 2012

When going from any module into the Print Module, Lightroom crashes. Another thread suggested using a new catalog without any templates. I did and the application did not crash. Unfortunately, Lightroom is now booting into the print module with the catalog that is causing it to crash. From previous threads it sounds as if the issue was print templates. How do I delete the error causing templates?

View 4 Replies View Related

Lightroom :: 4.1 Running On IMac (Mountain Lion) Crashes When Trying To Print

Sep 9, 2012

Lightroom 4.1 running on iMac (Mountain Lion) crashes when trying to print.  No problems printing from Photoshop CS5.

View 1 Replies View Related

VideoStudio :: Can't Create 3D Videos - Program Crashes

Mar 26, 2011

After successfully using VideoStudio X2 for quite a while now, I’ve just updated VideoStudio X4.

My laptop meets the minimum specifications, however, I have just one problem with X4.

I can output to every file format including HD, but if I choose the 3D option, anaglyph or side by side, the program “crashes“.

I get 'the program has encountered an unspecified error and has stopped functioning' and 'the memory could not be read' errors. Both messages show 3 times each. The program will eventually close when I’ve OK’d all six messages.

I’ve tried different lengths of video, from short to long, but it makes no difference.

I don’t plan on doing loads of 3D videos, just the occasional short one for fun. Even though I find red/blue 3D video tiresome to watch, I would like to have a fully functioning program as everything else on X4 works like a dream.

View 14 Replies View Related

VideoStudio :: Pro X3 - Creating MPEG-4 HD Crashes Program

May 14, 2011

I have a project with only photos (about 200) and 3 songs. Total length is about 16min. I have successfully created a .MPG (2.3GB) and .WMA (474MB) HD files.

My problem is when I create a MPEG-4 HD files. It kept crashing the program while "Creating File..."

Error message, "The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis."

I tried another project with photos and music only and encountered the same problem. Shortening the project yielded the same (one song and a few pictures).

I tried using "Custom" and using the HD settings resulted in the same error. Nothing works.

My patches are up to date. How to create Hi Def movie files that I can playback with and Apple computer (Quicktime).

View 14 Replies View Related

AutoCAD LT :: Program Crashes When Making A Block?

Mar 24, 2012

I was trying to make a block of an elevation, no more than 150 objects and the program had a FATAL ERROR; I tryed again and again and always the same fatality.

I'm using AutoCAD LT 2007

View 1 Replies View Related

Photoshop :: Bridge CS3 Crashes Upon Opening Program

Nov 11, 2008

I tried reinstalling, uninstalling, reinstalling, updating the graphics driver...

View 1 Replies View Related

AutoCAD 2013 :: Program Goes Unresponsive And Then Crashes

Jun 7, 2012

I'm in Autocad if I use the "open" command and go to a file directory there are several subfolders that we have to save drawings in before we make changes to them. If I copy and paste from one folder to the next while in the open dialog box it copy the file fine but the next time I try to open any drawing file the program goes unresponsive and crashes.

View 3 Replies View Related

AutoCAD .NET :: Program Crashes When Trying To Access Modelspace

Jan 29, 2012

I have a program where I am inserting blocks at specific points in model space.  I have successfully been able to create a subroutine that will accept a block name, a point3D Location and a layer name and and insert the specified block at the specified location on the specified layer.  What I need to do now is to cycle through model space and find all of the pipe objects in model space.  I then find the endpoint of each pipe and insert a block at that location.  The problem that I am having is that the program crashes when I try to find the objectid of modelspace.  I am using the technique discussed in this thread by Jeffrey_H.

VB.NET Access to Styles

Below is the code that I am trying to get to work.
 
'Test Command to insert the some blocks into the drawing <CommandMethod("TrimbleTestBlocks")> _ Public Sub TrimbleTestBlocks() 'Get the editor object Dim doc = AcApp.DocumentManager.MdiActiveDocument Dim db =

[Code]....
 
This is the line that crashes on me

 'Get Model Space Block Table Record Dim mdlspace As BlockTableRecord = SymbolUtilityServices.GetBlockModelSpaceId(db).GetObject(OpenMode.ForRead)
 
why this is crashing the program?  I just started programming dotnet this weekend and my head is starting to explode.

My end goal is to cycle through every pipe in model space.  If the pipe belongs to a specified system definition then find the pipe size and insert a corresponding block on the endpoint of the pipe.  I then want to export the blocks to a new drawing to be imported into a trimble unit for locating inserts on a deck. 

View 9 Replies View Related

Paint Shop Pro :: Where Does A Scanned In Image Go When Program Crashes

Nov 16, 2012

I was working on a very HI-res image when Paint Shop Pro X4 just quit. It just went away, no errors, nothing.

I can rescan the image, but it was a very large image and took lots of disk space.

Is this scanned in image still on my hard drive? If it is where do I find it, so I can delete it?

View 5 Replies View Related

AutoCAD Map 3D :: Image Insert Crashes Program - 2012?

Sep 16, 2011

Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....

View 1 Replies View Related

Illustrator :: Program Crashes When Making Vertical Blends?

Apr 9, 2013

I'm making a layout of 2 inch squares, 20 wide and 5 tall, to make color swatches for matching a target color.  I'm then taking a starting value and using the edit colors>blend vertically, and blend horizontally to blend the color in the direction I think it needs.  But every three or so blends i make it crashes the program, and even when I save my progress it crashes half the time.  its a simple file just 2 inch square with color files. 
 
I'm using CS6 on a osx10.6.8  ALL other jobs I've been working on have been fine.

View 1 Replies View Related

VideoStudio :: X4 - Auto Music Error / Program Crashes Instantly

Oct 30, 2012

I have reinstalled this program 3 times arlready and the Auto Music feature still does not work? Every time i make a project and want to add some music off the Auto Music feature the whole program crashes instantly? I keep getting over and over again, Unspecified Error? Everything thing else works in the program except the Auto Music.

View 2 Replies View Related

CorelDRAW X5 :: Unable To Open Blank New Document - Program Crashes

Oct 10, 2013

I have been running corel x5 for about 2 years now and all of a sudden I tried to open a new blank document and it crashed the program saying that Corel Draw has encountered a problem and needs to close??

View 3 Replies View Related

AutoCAD .NET :: Changing Dimension Style Property To Same Value Crashes Program

Sep 30, 2013

In my code, I create a copy of dimension style:

 s3 = New DimStyleTableRecords3.CopyFrom(vz)s3.Name = nazovtst.Add(s3)_trans.AddNewlyCreatedDBObject(s3, True)
_trans.Commit()

Then, in another part of the code, I open the new style and change a property:

Using trans As Transaction = db.TransactionManager.StartTransaction ds = trans.GetObject(ds.ObjectId, OpenMode.ForWrite) ds.Dimtxsty = s2TextStyle.ObjectId trans.Commit() End Using
 
this works OK for the first time, but when I run the code again, I don't create the new style, I just take the existing one and changing the Dimtxtsty property to the value it already has causes AutoCAD crash

View 5 Replies View Related

Photoshop Elements :: Organize / Edit Screen - Program Crashes

Jan 27, 2014

When I open PE8 and click on organise on the organize/edit screen the program crashes.

View 1 Replies View Related

Photoshop Elements :: Cannot Run Slideshow After Adding Audio - Program Crashes

Feb 17, 2013

I can add an audio to my slieshow. After that I cannot run the audio nor the slide show. the program crashes. I took screenshots of the error messages.

View 1 Replies View Related

Premiere Pro :: Import Function In V6 Won't Work - Crashes 90 Percent Of The Program

Jan 15, 2014

I was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline.

View 4 Replies View Related

Photoshop :: Epson 3880 / When Sending Image To Printer In CC - Program Crashes

Nov 16, 2013

latest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .

View 2 Replies View Related

VideoStudio :: Whenever Click On Create Video File Button Program Crashes

Mar 13, 2012

I downloaded a trial copy of the Corel VideoStudio Pro X5 Ultra. Every time I click on the Create Video File button the program crashes. I get a message that the program must exit. Every time I try this, it crashes.

View 4 Replies View Related

Photoshop Elements :: Drag Image Out Of Project Bin To Workspace - Program Crashes

Nov 4, 2013

When I try to drag an image out of project bin to an image in the workspace my program crashes.  I have reinstalled the program but still doing this.  All updates are done and I'm at a loss as what to do.

View 5 Replies View Related

Photoshop :: Uninstall And Reinstall Program / Adobe Application Manager Freezes / Crashes

May 16, 2013

Whenever I go to open up Adobe Photoshop (64bit or otherwise) it will load up for a second then crash the next. It doesn't give me error reason why only says it has stopped working and it can't detect a problem so it closes. I have tried to uninstall and reinstall the program but the Adobe Application Manager is also acting weird. When it is opened it freezes and soon crashes saying there is a "Download Error".

View 2 Replies View Related

AutoCAD Civil 3D :: 2012 Program Crashes When Attempting To Draw Pipe Network

Feb 28, 2013

My program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.

View 3 Replies View Related

Photoshop :: CS3 - Could Not Print (filename) Due To Program Error

Apr 30, 2013

I keep getting message in cs3 "could not print (filename) due to program error!" why?

View 3 Replies View Related

Photoshop :: Elements 7.0 / Program Will Close When Trying To Print

Jun 18, 2012

Program will close when trying to print.

View 1 Replies View Related

Photoshop :: CS5 Crashes When Try To Print?

Sep 7, 2012

This has happened since I installed the program last year. Photoshop crashes no matter what kind of image file I try to print. I use a MacBook Pro and an Epson Stylus Photo R200 printer.  I have checked for driver updates and there are none.  The printer works fine with other programs.  I tried following the directions to run Photoshop in 32 bit mode but the option does not come up in my menu.
  
Here is the latest error report.

Process:         Adobe Photoshop CS5 [313]
Path: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
Identifier: com.adobe.Photoshop
Version:         12.0 (12.0x20100407.r.1103] [12.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [115]

[code]....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved