Lightroom :: Computer Crashes When Try To Print?
Aug 28, 2013My computer crashes when I try to print to my Epson Photo R1800 printer from either light room 5 or photoshop CS5. I'm using a mac with X.8.4.
View 1 Replies
ADVERTISEMENT
Lightroom :: When Try To Print From 4.3 The Program Crashes
Jan 28, 2013Anytime I try to print from Lightroom 4.3 the program crashes. Why ?
View 2 Replies View RelatedLightroom :: Crashes When Entering Print Module
Feb 20, 2010Whenever I try to enter the print module Windows tells me Lightroom has encountered a problem and needs to close. The print module worked fine some weeks ago, but now it doesn't. Everything else seems to work fine.
First thing I tried was to relaunch and optimize my catalog which didn't work.
I then tried to reinstall LR 2.4 with no luck. I then Downloaded and installed 2.6, still no luck.
I had cleaned the registry after the print module worked last time, so I reloaded the registry with those values, still no luck.
I then deleted Lightroom 2 Preferences.agprefs and let LR relaunch to create a new one. Now the print module works.
As I am not using the default catalog I went into preferences and pointed LR to my catalogue and then relaunched again thinking the problem was solved. But when I tried to go into the Print module LR crashed again.
I figured that since the Print module worked with the empty default catalog the error must lie somewhere in my catalog. I therefore went back and tried using one of my backup catalogs, but LR crashed again when I tried to access the Print module. I even went back and tried all my backup catalogs and a couple of the oldest ones does not cause LR to crash when going into the Print module.
I'm on Vista with 4 gb of RAM, using dual monitors, and I've tried reducing the resolution and using only one screen as well.
So, my question is what could possibly go wrong inside a catalog file that would cause LR to crash in one module only? And why is it that the backups saved even the month before I last used the print module also causes the problem? Seeing as how I've been using that very same catalog and having a working print module?
Lightroom :: 4.2 Crashes When Entering Print Module
Dec 12, 2012When going from any module into the Print Module, Lightroom crashes. Another thread suggested using a new catalog without any templates. I did and the application did not crash. Unfortunately, Lightroom is now booting into the print module with the catalog that is causing it to crash. From previous threads it sounds as if the issue was print templates. How do I delete the error causing templates?
View 4 Replies View RelatedLightroom :: 4.1 Running On IMac (Mountain Lion) Crashes When Trying To Print
Sep 9, 2012Lightroom 4.1 running on iMac (Mountain Lion) crashes when trying to print. No problems printing from Photoshop CS5.
View 1 Replies View RelatedPhotoshop :: CS6 Crashes On Windows XP Computer
Nov 27, 2012Recently installed and then updated Photoshop CS6 Extended - "About" says Version 13.0.1 x32.
Â
Sometimes Photoshop comes up and I can use it, but then I get a Windows XP error"bark," with no error message or error dialog. Once that happens I can no longer open or edit or save images. Other times it will not completely start up.
Â
The "universal" Microsoft Windows "fix," a re-boot of the computer makes the problem go away, until it happens again. I have made sure that there are no errors in the registry with Norton Utilities. Windows XP is up to date.
Â
Is there an error log someplace that Photoshop issues? All other apps on the computer seem to work fine.
Lightroom :: Starting LR5 On An New Computer And Porting LR4 Pics From A Previous Computer
Mar 15, 2014I started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies View RelatedPaint Shop Pro :: X4 Crashes And Also Cannot Get Computer Tab To Open?
Jul 18, 2012My Paintshop Pro X4 was working great, until I registered it today, then all hell broke loose. It crashes and also I cannot get the "Computer" tab to open, only the "Desktop" tab will work correctly. Tried restarting it, same results. I use Win XP Pro SP3 and computer does not have virus, nor malware. Hard drive is 500G. Graphics card is updated and more than adequate.
View 2 Replies View RelatedPhotoshop Elements :: Screen Turns Grey And Computer Crashes?
Oct 21, 2012When starting Photoshop Elements 8 Editor in Windows 7, the screen turns grey and my computer crashes. I tried reinstalling Elements 8 twice.
View 1 Replies View RelatedPhotoshop :: Print Screens Of Windows Open On Your Computer?
Mar 8, 2008How do you take print screens of windows open on your computer?
View 2 Replies View RelatedAutoCAD Print / Plot :: 3D Solids - Prints Fine On One Computer Not On Another
Dec 2, 2011I'm having this major issue where on one drawing, 100% of the solids plot as expected. Â On another computer, with the exact same (as far as I can tell) settings in AutoCAD - both are 2012, both are pulling same plot style from network, both are pulling from same plot configuration from network - yet in the other one, half the solids don't print correctly.
the problem started on 2010, but then I tried a fresh install of 2012 and the problem persisted. Â I have 2012 on my PC so I assumed the problem on the user's PC may just be easily fixed with a new CAD installation.
Also, when I click in the viewport and click "Hide", it looks fine. Â And, so you know, I am attempting DWG to PDF. Â On my PC it works, not on their PC. Â This is also true in Plot Preview.
Photoshop Elements :: Why Does PSE10 Print Dark And Red And Not Match The Computer Screen
Jan 6, 2013I switched from Photoshop Elements 7 to Photoshop Elements 10. I cannot get a print of a photo that matches the screen. Photos are dark and red. I cannot edit the photos because I do not know what will print out.  I have switched back to Photoshop 7 and my photos print fine, just as they have been edited.
View 3 Replies View RelatedPhotoshop :: CS5 Crashes When Try To Print?
Sep 7, 2012This has happened since I installed the program last year. Photoshop crashes no matter what kind of image file I try to print. I use a MacBook Pro and an Epson Stylus Photo R200 printer. I have checked for driver updates and there are none. The printer works fine with other programs. I tried following the directions to run Photoshop in 32 bit mode but the option does not come up in my menu.
 Â
Here is the latest error report.
Process:Â Â Â Â Â Â Â Â Adobe Photoshop CS5 [313]
Path: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
Identifier: com.adobe.Photoshop
Version:Â Â Â Â Â Â Â Â 12.0 (12.0x20100407.r.1103] [12.0)
Code Type:Â Â Â Â Â Â X86-64 (Native)
Parent Process: launchd [115]
[code]....
Photoshop :: CS 5.5 Crashes When Print
Feb 13, 2012We just upgraded our user to CS 5.5 from CS 4. He still has CS4 installed. When we go to print the item he's working on via "Print" the program crashes. When we click "Print options" that crashes. Alternatively when we print via "Print one page" that works. I have removed and added the printer since we did the install and his version of software is fully up to date. Here's the error log.
Â
MacOS/Adobe Photoshop CS5.1 Identifier:Â Â Â Â Â com.adobe.Photoshop Version:Â Â Â Â Â Â Â Â 12.1 (12.1x20110328.r.145) (12.1) Code Type:Â Â Â Â Â Â X86-64 (Native) Parent Process:Â launchd [87] Interval Since Last Report: 4963 sec Crashes Since Last Report: 4 Per-App Interval Since Last Report:Â 201 sec Per-App Crashes Since Last Report:Â Â 4 Date/Time:Â Â Â Â Â Â 2012-02-13 10:40:59.586 -0800 OS Version:Â Â Â Â Â Mac OS X 10.5.8 (9L31a) Report Version:Â 6 Anonymous UUID:Â
[code]...
Photoshop :: CS6 Crashes When Try To Print
Apr 8, 2013Tried updating the whole CS6 suite, also uninstalled and reinstalled printer, and print drivers. Using Win 7 64.
Â
Crash log:
Â
Version=1
EventType=APPCRASH
EventTime=130099235437674630
ReportType=2
Consent=1
UploadTime=130099235438504713
ReportIdentifier=f760adf0-a083-11e2-a833-b8ac6f2384c2
IntegratorReportIdentifier=f760adef-a083-11e2-a833-b8ac6f2384c2
Response.BucketId=75256915
Response.BucketTable=4
Response.type=4
[code]....
Photoshop :: Crashes When Trying To Print
Apr 8, 2009Everytime I try to Print from Photoshop CS4 it will crash CS4. I have tried to set the default printer as the Microsoft Image Writer with no success. It does not matter if the image is a JPG or TIFF image. I have XP SP3 installed and it is fully patched.
View 17 Replies View RelatedIllustrator :: CS5.1 Crashes When Print Over PDF
Jun 6, 2013Illustartor never used to do this. I have installed it onto a new computer with a windows 8 operating system. The file I was working with was simple, but had aprox. 30 layers to it.
View 1 Replies View RelatedLightroom :: 4 Print Module - Print And Print One Tabs Greyed Out
Nov 25, 2012In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedPhotoshop :: CC Crashes When Press Print?
Jun 24, 2013i have a trial version of ps cc it crashes when i go to print. What should i do?
View 1 Replies View RelatedPhotoshop :: CS5 (under Windows 7) Crashes When Try To Print?
Feb 17, 2012I am running 64-bit Photoshop CS5 Extended upgraded to current version (12.0.4).
Â
When I try to print, every single time, I get the following error immediately:
Â
> Adobe Photoshop CS5 has stopped working
Windows is checking for a solution to the problem
Â
and then shortly after
Â
> Adobe Photoshop CS5 has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
Â
Quite infuriating. My printer works fine. I can print photos to it from Lightroom no problem (which, in this occasion, I had to do - saved from PS, imported to LR, then printed... very efficient!!).
Â
I note there are other posts on this but they seem to be mostly Mac and also many seem to cure by upgrading to 12.0.4.
Â
I am a relatively light user (keen amateur not professional) so I don't use PS regularly. However this also means it is pretty much an out-of-the-box install since I don't tinker with it either. It's so long since I last used it I can't remember if I had this problem last time - I vaguely recall having had it sometimes but not others. Doesn't seem to matter whether the file I opened is a JPG or a PSD (the only two I have tried).
Photoshop :: CS6 Crashes When Trying To Print (Windows 8)
Mar 12, 2013Everytime I try to print from Photoshop CS6 using Windows 8 Photoshop crashes. I click the print option from the File Menu and bam it crashes and shutdown. No error message no nothing. I have installed the latest updates and still no go.
View 4 Replies View RelatedPhotoshop :: Mac OS X 10.8.2 CS5 Crashes When Print With HP Printer?
Jan 24, 2013Just bought a new iMac with OS X Mountain Lion (10.8.2). Installed my HP PhotoSmart C4180 printer and its drivers, it prints fine from Adobe Acrobat and scans just fine. I went to print from Photoshop CS5, and once I decided my settings and hit "Print" the program crashed and has done so consistently. I've provided the crash report below.
Â
Process:Â Â Â Â Â Â Â Â Adobe Photoshop CS5 [13103]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
[Code]....
Photoshop :: CS6 Update Crashes Everytime When Go To Print?
Apr 30, 2013With the lastest update to Photoshop CS6 it crashes everytime I go to print.
View 4 Replies View RelatedPhotoshop :: CS6 Crashes When Selecting Print Command?
Apr 9, 2013Starting a few weeks ago Photoshop CS6 crashes every time when selecting the print command with the error : "Adobe Photoshop CS6 has stopped working" This happens using different printers and when printing anything, including a blank page. Printing works fine from other applications.
Running Photoshop CS6 v.13.1.2 x32 on Windows 7 Professional 64bit
This is a Dell Optiplex 990, I7 3.4GHz, 4GB RAM, 250GB HDD system, AMD ATI RADEON HD 6350 PCIe Video Card on a 16x bus
Â
1) Photoshop has been updated
2) OS has been updated
3) Video drivers have been updated with new ones from the manufacturer
4) I tried new drivers for our Kyocera TaskAlfa 3550ci
5) I tried new drivers for our Kyocera FS-3140MFP
6) I also tried removing all of the printers except "Adobe PDF" printer
Here is an example event from the Windows Application Log after photoshop crashed.
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b60
Exception code: 0xc0000374
Fault offset: 0x000c380b
Faulting process id: 0xa0c
Faulting application start time: 0x01ce355706f614ca
Faulting application path: C:Program FilesAdobeAdobe Photoshop CS6Photoshop.exe
[code]....
Illustrator :: Can't Print From Adobe CS3 Or CS4 / Crashes Everytime
Jan 2, 2013MacBook Pro with Mountain Lion, 10.8.2. Can't print from Adobe Illustrator CS3 or CS4. Crashes evertime. I tried uninstalling and reinstalling the printer. An HP 3100 series.
View 4 Replies View RelatedPhotoshop Elements :: 8 Will Not Print - Crashes Organizer
May 10, 2013PSE 8 will not print. Two printers are installed by windows 7, B/W and Colour.  Read support from Adobe about PSE 8 Organizer a to get a print job done but no PRINT box to select. By Right clicking on photo print shows but crashes Organizer. Have sent a description back. PSE 8 was reinstalled after HD changed to SSD. Was reactivated after install.
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Crashes When Doing Print Merge?
Apr 7, 2011I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View RelatedAutoCAD Print / Plot :: LT2011 Crashes When Plotting?
Jan 3, 2012I have a Dell 515 plotter printer connected to a network computer. I can print to it from other programs, but as of this evening, when I select the printer, the screen goes white and autocad dies. I can print to a pdf or even select another printer that is not even turned on. This also happens when the 515 is set as the default and I select print to default system printer.
this has happened before and It seemed like a lucky fluke that i got it to stop. something about the order of change scale, preview, change plotter etc, but no luck this time.
AutoCAD Print / Plot :: 2012 Crashes When Publishing On XEROX 6604
Oct 14, 2011Before upgrading to 2012 from 2010 (against our will), our publishing tool worked seamlessly with our XEROX 6604. Now, strangely only one user out of seven has the ability to publish a set of drawings without crashing AutoCAD. We are happy that it works on his machine, but it seems very odd that the rest of us are affected when our PCs are the same spec and setup.Â
All of the proper drivers and firmware are up to date.
AutoCAD Print / Plot :: 2014 Crashes When Plotting To HP DesignJet T1200 HD MFP
Nov 1, 2013Client machines are windows7 64bit sp1.Having issues with one plotter at this point-- HP DesignJet T1200 HD MFP.
.This plotter worked fine with AutoCAD 2013 Autodesk software uses windows printer objects for printing not pc3s.
Plotter driver is the newest hpgl2 off hp's website for that plotter.
So far crashes when attempting to plot from autocad and revit. Gets the attached message.
AutoCAD Print / Plot :: 2013 Crashes Setting Up Kip 5000 Printer
Apr 23, 2012AutoCAD 2013 crashes during the plot configuration for our printer. When I select Custom Properties for our Kip 5000 Series Printer I get an Unhandled Exception popup. When I click continue I get a message that "AutoCAD Applicaiton has encountered a problem and needs to close", the program crashes. AutoCAD 2013 will not let us select the kip 5000.pc3 file we used for Autocad 2012.
How can I set my printer up if it keeps crashing the program. Is there a new driver for 2013, if so where do I find it. Is it from AutoCad or the printer company Kip America (who have yet to reply to my email).
I have attached the error message