latest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .
View 2 Replies
Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
I am having problems printing from Photoshop CS6 to an Epson Pro 3880 in paper sizes 13x19 and 17x22. I have not had this problem several weeks ago, but it has shown up in the past week.
I worked with Epson Tech support and we were able to determine that the problem was with Photoshop which took several days working with tech support. We downloaded new drivers several times and reset the printer to factory settings. Then we tried printing and still had the same problems a small print in the lower left hand corner of these larger papers. The printer prints fine on 8.5x11 paper. We then tried printing from Lightroom 4 and it did fine. So next we uninstalled Photoshop CS6 and reinstalled and still found the exact same problem.
printing on my new 3880 through Photoshop CS5 on an iMac 10.6.8. Using Photoshop CS5 as 'color handling'-- the color mode is greyed out (can't change it) in the print settings. How can I change the color modes? Mostly turn off color management so I can use ICC printer profiles?
View 5 Replies View RelatedSuddenly my LR 3 doesn't want to print to my epson pro 3880?
View 2 Replies View RelatedI've been noticing for a while that my Epson 3880 "keeps printing" after the image has been printed. I loaded some paper that is a little wider than 11x14 (12x14) but I print on it as if it's 11x14. I printed an image (only 8x10 on the page) and now that a wider paper is in the tray I see that a black line is being printed down the side of the page. It's a line that is actually being printed down the entire sheet. When the paper isn't wider than what I've specified the print head just goes past the paper and "thinks" it's printing on the paper.
The printer is an Epson 3880 with current drivers and I'm using the current version of Photoshop CS5.
Using LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
It printed correctly when I printed with PS Elements, but I want to use LR.
Tried attaching a screen shot but that didn't work either.
I can't seem to figure out a problem I'm having trying to print using ABW mode on my Epson 3880 from LR5.3 - it is greyed out an inaccessible. I'm familiar with the safety net that precludes double color management when LR is set to print with a profile. But even when I have output set to "Managed By Printer" I still can't access ABW. It's grayed out. What am I missing here?
View 6 Replies View RelatedI am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies View RelatedI am not able to print images in Photoshop cs6 accurately using my Epson r1900 printer. This seems to have become an issue only since installing cs6. The images look dark and murky. I am using osx 10.7
View 1 Replies View Relatedevery time I use my Dell Printer and go into scanning and select 'scan to' and select Gimp as the image program. Gimp freezes for eternity on Gimp Startup and I HAVE to 'end process'!!! end task DOES NOT work!! how do I fix this while scanning directly into Gimp?
View 2 Replies View RelatedHaving an issue with Xara Pro 4 and AccuRIP (Epson1430). Not sure if it's Xara, The printer or AccuRIP issue.
THE ISSUE - when sending multiple pages to the printer, where the pages are spooled, the output will have vertical rasterized streaks of zaggies throughout the output.
THE SOLUTION - send 1 page at a time, wait for it to print, then send next page. FYI Corel has a similar issue when sending several spot pages at the same time.
Using AccuRIP for printing halftones and vectors?
I have tried searching the forum how to do this but all the posts I can find talk about using Illustrator etc. I wish to send a PDF/X, 300 pdi file to a commercial printer (A4 and then A3 versions) using just XDPX.
How do I include bleed margins and crop marks?
I tried to achieve this by creating a custom page oversized from A4 to accommodate crop marks and a 3mm bleed margin. When I exported this as a .pdf I got a displaced image within an A4 page. How do I create a suitable file?
On my MacBook OSX 10. 8.2 I can't print with my Epson printer. Yet I can print with Photoshop CS 5.
View 3 Replies View RelatedMac OSX Snow Leopard 10.6.8 and Epson 3880 Printer version 8.64 incompatability issues -
can't print with printer driver, can't get 'Printer Settings'.
I want to buy and Epson 4000 printer for my art photos - I've always done film but I'm switching to digital finally and got 2-3 years worth of stuff scanned. I want to make nice, high-quality, archival prints. Should I buy the regular 4000 printer or the Pro? There is something about Post RIP devices in the Pro - I don't use InDesign, at least not yet, but I have heard that the colors and color targets are better with the Pro. I am still learning the all about digital stuff so I am a little uncertain but I have been doing photography for a long time and I want to make excellent prints. Is it worth the extra $350 or so?
View 1 Replies View RelatedWhen I try to drag an image out of project bin to an image in the workspace my program crashes. I have reinstalled the program but still doing this. All updates are done and I'm at a loss as what to do.
View 5 Replies View RelatedWell the printer, 2400 Epson, used to print ok with CS, but I'm clicking print and nothing is happening. I know the printer and cables are ok becuase it's printing fine with Image Print rip.
View 6 Replies View RelatedI have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies View RelatedUsing my Espon R2000 with Photoshop CS5 and Windows 7 (32 bit), I have to re-select the printer every time I print a copy, resetting the paper type, orientation and printer profile.
Sometimes, mostly when I'm only doing my 2nd or 3rd copy, I can just click on the printer properties to make the selections, but most often when I do that I get the error message "because the printer does not exist". I've installed the most recent updates for Photoshop (ver. 12.0.4).
I just bought a new 4000 printer and the prints come out a little darker and with a little more magenta than what appears on my monitor.
The monitor has been calibrated using the spider software several times and each time it comes out the the same and I think that part of the process is good.
I have set my color workspace in Photoshop to US press defelts (Adobe 1998) and all seems well there.
The images have been scanned to 8000dpi using a High quality scanner from an outside source.
I open the image and convert to working space RGB, and do my correction to the image which includes more color saturation.
I go to print the image using Adobe1998 as source and the printer paper ICC as the output. I go to advanced options and make sure color correction are turned OFF and print.
The images on my printer always come out darker and with more magenta that what I see on the screen no matter what Icc profile I use for every kind of paper.
The softproof does not look that way.
When I print using same as source as the output with color correction sliders set to 0 the print will be much closer but still not quite like whats on the screen.
When I do it the correct way(the first way I discribed) why is my print comming out too dark and too much magenta?
I have asked Epson and gotten no response so I though I would try somewhere else. I have an Epson RX595 printer that can print to DVD's and CD's my question is ...
Is there a way to print a DVD/CD directly from Adobe Photoshop.? Is there a template that I can download and open in photoshop and it will be configures properly to print to this printer?
When I try to print to my Epson PRO 3800, asking Photoshop to handle colors, this printer profiles are not available. I have this printer for years and have always used PS CS3 to print (and handle colors).
Now I have PS CS5 but continue to use 3 for printing to the 3800, because the Epson profiles disappeared from CS5. Now they have disappeared from CS3 too.
Have been working with Epson tech support to get colors to match the CS5 colors to no avail. Have claibrated my monitor usingHuey calibration unit and no matter what I try cannot get the correct colors.
View 7 Replies View Relatedwindows7 Epson 2880 printer I can print in Lightroom with no problem. CS6 was printing okay. Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash. Just won 't print. My printer dialog box says error printing then recover file , but when i try again nothing. everything else seems okay. I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong. Is does CS6 haveto be re instalked ?
View 2 Replies View RelatedI can't print to my Epson R3000 printer from the Photoshop Elements 10 I have installed on a Mac OS 1.7.5
View 2 Replies View RelatedI was working on a very HI-res image when Paint Shop Pro X4 just quit. It just went away, no errors, nothing.
I can rescan the image, but it was a very large image and took lots of disk space.
Is this scanned in image still on my hard drive? If it is where do I find it, so I can delete it?
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
View 1 Replies View RelatedI still use Photoshop CS2 and recently I downloaded the driver for my new Epson NX430 printer. Since then Photoshop won't open. I uninstalled the entire CS2 Suite and reinstalled. Photoshop still won't work though the rest of the programs do. I am using Mac OS X 10.4.11.
View 3 Replies View RelatedWhy can't I get my Epson Printer to print the colors on the monitor> First time this is happening. Printer is new...ink okay...and history with the printer has been okay. Took some photo's yesterday...blue heron, picking up a fish in a pond. Water is blue...heron is grey and white and has other yellowish and maroon coloring as well. The fish he caught was a gold fish. The colors on the monitor are wonderful.
The photo's were cropped severely. But are still clear. Now the water is pink...and the heron is a disgusting color of grey green. Have chosen ICM...chosen Adobe color profile. Used premium glossy white papers, Epson inks.
Tried printing it out without ICM and with different papers....still the same...Either everything is hot pink, or dull gray brown. This was my first ever heron photo that had any merit, and I so want to print it out for everyone to see. I was so lucky to catch the fishing capture. Does the cropping have anything to do with the printing of the photo?
