Photoshop :: CS5 / Epson 3880 / Black Line Printed Down Side Of Paper?
May 22, 2012
I've been noticing for a while that my Epson 3880 "keeps printing" after the image has been printed. I loaded some paper that is a little wider than 11x14 (12x14) but I print on it as if it's 11x14. I printed an image (only 8x10 on the page) and now that a wider paper is in the tray I see that a black line is being printed down the side of the page. It's a line that is actually being printed down the entire sheet. When the paper isn't wider than what I've specified the print head just goes past the paper and "thinks" it's printing on the paper.
The printer is an Epson 3880 with current drivers and I'm using the current version of Photoshop CS5.
View 2 Replies
ADVERTISEMENT
Jan 3, 2013
I am having problems printing from Photoshop CS6 to an Epson Pro 3880 in paper sizes 13x19 and 17x22. I have not had this problem several weeks ago, but it has shown up in the past week.
I worked with Epson Tech support and we were able to determine that the problem was with Photoshop which took several days working with tech support. We downloaded new drivers several times and reset the printer to factory settings. Then we tried printing and still had the same problems a small print in the lower left hand corner of these larger papers. The printer prints fine on 8.5x11 paper. We then tried printing from Lightroom 4 and it did fine. So next we uninstalled Photoshop CS6 and reinstalled and still found the exact same problem.
View 4 Replies
View Related
Oct 12, 2012
printing on my new 3880 through Photoshop CS5 on an iMac 10.6.8. Using Photoshop CS5 as 'color handling'-- the color mode is greyed out (can't change it) in the print settings. How can I change the color modes? Mostly turn off color management so I can use ICC printer profiles?
View 5 Replies
View Related
Aug 29, 2012
Suddenly my LR 3 doesn't want to print to my epson pro 3880?
View 2 Replies
View Related
Nov 16, 2013
latest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .
View 2 Replies
View Related
Nov 26, 2012
Using LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
It printed correctly when I printed with PS Elements, but I want to use LR.
Tried attaching a screen shot but that didn't work either.
View 1 Replies
View Related
Mar 12, 2014
I can't seem to figure out a problem I'm having trying to print using ABW mode on my Epson 3880 from LR5.3 - it is greyed out an inaccessible. I'm familiar with the safety net that precludes double color management when LR is set to print with a profile. But even when I have output set to "Managed By Printer" I still can't access ABW. It's grayed out. What am I missing here?
View 6 Replies
View Related
Oct 28, 2012
I am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies
View Related
Mar 7, 2014
Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
View 7 Replies
View Related
Oct 1, 2012
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
View 13 Replies
View Related
Sep 12, 2012
When I print a bitmap or picture a black line is also printed on top of it, what can I do? since clients don't like that line.
Corel X6, Cor i3, 4 Gb.
View 11 Replies
View Related
Aug 3, 2013
When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies
View Related
Mar 15, 2012
I've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
View 4 Replies
View Related
Jul 25, 2012
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies
View Related
Dec 21, 2012
Printing to an Epson 4900, my document is fine on the preview but when I print it gets slighly enlarged and the edges get cropped.
I even selected scale to fit media and it still got cropped. My image actually gets enlarged ( mesuring the image with a ruler )
View 2 Replies
View Related
Mar 1, 2003
creating web graphics, web text, web gifs but I seek a resource of creating a document in photoshop, designed for an 11 x 8.5 inch piece of paper that when printed, will be crystal clear.
Most of my efforts, in fact all of my efforts have fallen short (smudged or jagged print and graphics) so I'm missing something. I'm not saving it in the correct format, I'm not printing it with the correct settings, or something else.
my HP color printer is set correctly?
View 7 Replies
View Related
Jul 11, 2013
use soft proof preview in CS6. I want to indicate Epson paper type under device, however, no Epson papers are listed. How do I enter this selection?
View 4 Replies
View Related
Apr 22, 2009
I'm getting constant red light flashing from loading thick paper (ultra smooth fine art) fromt he back tray.
View 4 Replies
View Related
Jun 27, 2013
When i put 2 pictures side by side, if both have a black background, everything fine. When one of the picture have a lighter background, there a white line apear on the edge of the lighter background (see yellow circles on the attached picture).
View 4 Replies
View Related
Dec 27, 2012
My PC operating Microsoft XP had to be replaced. I was using Adobe Photoshop6.0, serial #<deleted>. That program is lost to me and I am now using Photoshop 2.0. I cannot find a way to adjust for different media types; that is, plain paper, glossy photo paper, etc. How do I make the adjustments to accommodate a variety of media using Photoshop 2.0 and can I get access or download Photoshop 6.0?
View 4 Replies
View Related
Jan 20, 2006
trying to take my artwork and print my own greeting cards. Is there anyway that I can print on both sides of my paper? Or .. maybe that's possibly in the printer...
View 1 Replies
View Related
Apr 18, 2013
I have to get the printed paper model, and to assembly it within Inventor.
At the moment, I have the chassis, and next step should be a surface modelling.
But I`m not sure, which tool should I use. Chassis consist of some bulkheads, and there should be one patch between two neighbors. Patches are already printed:
So I have to bend them, according to bulkheads profiles.
Question is: how can I perform this step? I can`t realize, how to bend these patches, to stich two neighbor profiles. Is it possible for Inventor? Or should I use the authomatic surface fill, and texturing later?
View 7 Replies
View Related
Dec 10, 2012
I am trying to print on photo paper from Ligthroom 4 with the Epson DX8400 printer, on Windows 8. Yet I can't change the paper type. Is it possible that Lightroom doesn't like Windows 8 or is more likely that my printer doesn't like Windows 8?The screenshot shows all that I am offered in the porperties section
View 4 Replies
View Related
Dec 21, 2013
I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
View 16 Replies
View Related
Oct 12, 2013
How do I correct black lines running horizontally through a printed photo?
View 1 Replies
View Related
Feb 22, 2012
I'm looking to add the name of the person printing the document as well as the date to any paper copies printed. However, since everythign is stored in Vault, this needs to be done without making any changes to the document that require saving the document.
Ideally this would be automatic(requiring no user input).
I've used both iLogic and built Inventor Addins before.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 2 Replies
View Related
Jul 3, 2012
When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies
View Related
Dec 18, 2012
I have managed to great a canvas size for A4 paper and managed to put 4 different photos spaced roughly equally around the page. The problem comes when printing, when the page is printed I get a 1cm margin down the left side of the paper every time even though the preview print does not show this 1cm margin.
View 6 Replies
View Related
Nov 19, 2012
As you can see in the attached images their are tiny black holes that appear on the plotted pdf that are not there in paper space. I use the 3d clip command for my viewports to split up the tower into sections. The only thing I can think of is that for some odd reason when plotted the plot routine picks up these bolt holes that are suppose to be clipped out. how to prevent this?
View 2 Replies
View Related
Aug 24, 2013
what setting, the end mp4 video will always have black vertical margins. I never have this problem when generating videos with Quicktime using the same source.
The source dimension is 4256x2832, and specifying this as output size will also create the bars.
View 2 Replies
View Related
Nov 3, 2013
Recently I am having problems with a line being printed at the end of an image print. Not sure what is happening, but this is happening every time now.
View 4 Replies
View Related