My PC operating Microsoft XP had to be replaced. I was using Adobe Photoshop6.0, serial #<deleted>. That program is lost to me and I am now using Photoshop 2.0. I cannot find a way to adjust for different media types; that is, plain paper, glossy photo paper, etc. How do I make the adjustments to accommodate a variety of media using Photoshop 2.0 and can I get access or download Photoshop 6.0?
View 4 Repliescreating web graphics, web text, web gifs but I seek a resource of creating a document in photoshop, designed for an 11 x 8.5 inch piece of paper that when printed, will be crystal clear.
Most of my efforts, in fact all of my efforts have fallen short (smudged or jagged print and graphics) so I'm missing something. I'm not saving it in the correct format, I'm not printing it with the correct settings, or something else.
my HP color printer is set correctly?
I need to use Color Variations under the Enhance > Adjust Color menu, but it's greyed out when I scan in an image. I know it doesn't work with Indexed Color images, but I don't think that's what I'm scanning in. I'm using Photoshop Elements 9 and an Epson Perfection V700 Photo scanner.
Looking for the steps for scanning so that I can actually use this option? It's very important.
I've been noticing for a while that my Epson 3880 "keeps printing" after the image has been printed. I loaded some paper that is a little wider than 11x14 (12x14) but I print on it as if it's 11x14. I printed an image (only 8x10 on the page) and now that a wider paper is in the tray I see that a black line is being printed down the side of the page. It's a line that is actually being printed down the entire sheet. When the paper isn't wider than what I've specified the print head just goes past the paper and "thinks" it's printing on the paper.
The printer is an Epson 3880 with current drivers and I'm using the current version of Photoshop CS5.
I have to get the printed paper model, and to assembly it within Inventor.
At the moment, I have the chassis, and next step should be a surface modelling.
But I`m not sure, which tool should I use. Chassis consist of some bulkheads, and there should be one patch between two neighbors. Patches are already printed:
So I have to bend them, according to bulkheads profiles.
Question is: how can I perform this step? I can`t realize, how to bend these patches, to stich two neighbor profiles. Is it possible for Inventor? Or should I use the authomatic surface fill, and texturing later?
I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
I'm looking to add the name of the person printing the document as well as the date to any paper copies printed. However, since everythign is stored in Vault, this needs to be done without making any changes to the document that require saving the document.
Ideally this would be automatic(requiring no user input).
I've used both iLogic and built Inventor Addins before.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View RelatedI am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedI am trying to import thousands of pictures into Lightroom as I have a mess of pictures do to a long story...But basically I have probably 30,000 pictures in a bunch of folders that I want to import.
One issue I have found is that I don't want to import TIFF, BMP, GIF, or things like PNG. I really only want jpg files or jpeg files unless I stumble across others in another format I haven't found yet.
Can I set something during the import? I have searched the forums and internet, but haven't found anything that mentions this.
How to clean up a mess like this where I have 30,000 pictures but probably only need 10,000 as there are duplicates upon duplicates due to having to move the pictures around in a hurry as I had a mess in my basement during a storm a couple years ago.
I have been using Photoshop Elements for quite some time without any problems. Suddenly it appears the feature to change letter types is not responding. The last type I used seems to be stuck and I can not change to any other type. The window with the different letter types flashes up momentarely, but doe not open to be used. Uninstall / install die not solve the problem.
View 6 Replies View RelatedI added Keywords to many jpg files when I should have added them to their scanned source files (tifs). Is there an efficient way to copy them from the jpg versions to their tif “originals?” Except for their suffixes, they are identically named.
View 5 Replies View Related1 have a PC (XP 32 bits with PhotoShop Element. V1.0) I have another PC (W7 64bits) with PhotoShop V10. I have a color laser printer Brother CN4040. All these advices are connected with Ethernet.
I have a problem with the colors when I print some JPG pictures with this printer only when I use the PC (W7 64 bits with PhotoShop V10). For example, a picture with blue/purple at the screens prints like brown. I precise that printed with the XP PC, all the time, the colors are true (blue/purple). The 3 toner cartridges are new. Before I bought PSE 10, I had the same problem with PSE 1.0 on the PC (W7). I tried many printing settings on the PSE (W7) without success. The color pictures seems OK at the 2 screens.
why are there lines across printed picture
View 1 Replies View RelatedI have just bought PE12.
Is there any way that I can limit the types of file which Organiser is to import?
I want to organise my .jpgs (.gifs etc.), but not my .pdfs, or several others.
I am trying to load CR2 files from a Conon 600D to elements 7. Each time I try I get the message 'Nothing was imported, files did not contain any supported file types'. I imagine this is something to do with ACR. I have looked at some discussions here and as a result downloaded ACR 5.4, but I still get the same error message.
View 4 Replies View RelatedHow do I reverse an image-it is printed backwards
View 4 Replies View RelatedCan I have photos I make with out of bounds and layers printed?
View 1 Replies View RelatedHow do I eliminate vertical streaks in a printed picture?
View 3 Replies View RelatedI'm using Photoshop Elements 10 Organizer with Premiere Elements10 Installed. I have a number of files of type MTS which I understand to be AVCHD and are imported from my Panasonic Lumix TZ20 camera which captures HD video. These files will not play in the Organizer, resulting in a message stating the required Codec is missing. However, when the same file is sent to Premiere Elements for Editingand agreeing to a message to have Premiere set the correct properties for the media type it plays perfectly. What am I do wrong? Are there any settings I need to change to have Organizer also play the file successfully?
View 2 Replies View RelatedHow do I correct black lines running horizontally through a printed photo?
View 1 Replies View RelatedWhen printing in Orgnizer in Elements 11 the printout is as selected,but in Editor the image in Portrait format is always printed out smaller than selected e.g 15 x 10 cm image prints out as 10 x 9 cm. There is no 'Print Preview' facility available
View 5 Replies View RelatedI have cropped some pics during the editing process and when I go to print them out the pixels are really messed up. I am using a Nikon D3100. Maybe I am saving them wrong or something. I am saving them as JPEG.
View 4 Replies View Relatedi have taken an picture from the internet,and from RGB i have converted it to CMYK the background is supposed to be black as well as the picture that fades into it. after i print the final image,i can see 2 variations of black on my image all though both blacks have same colour value.
View 13 Replies View RelatedI often use the Image>Adjust Variations option in Photoshop but do not see the option in Photoshop CS6. I know we are still only in the BETA stage but I hope it is not going to be dropped. I like to use it for quick fixes on small portions of the image every now and again:)
View 13 Replies View RelatedI'm well aware that there are variations between images, but this new project is just baffling me.On medium setting I have image that are 400mb, and others that are only 50 mb.
This last one that is 50 mb is color, with a lot of dark, blacks, I would have thought it would have been on higher end but is 50, very low weight.
In x86 (32 bit) Photoshop under Image> Adjustments I can see the variations command, but not in x64 (64 bit) I've tried reinstalling but no dice...
View 25 Replies View RelatedThe colors on the computer monitor do not match the colors of my printed photos. The pictures have a yellow color cast. I am printing using HP Photosmart 7520.
View 1 Replies View RelatedIs there a reason the variations command is not available in the image adjustment menu?
View 1 Replies View RelatedIs there a replacement plug in similar to the "Variations" command that was thoughtlessly aborted in CS6... ANYTHING SIMILAR AT ALL.
I know what all you "pros" will say, but I have been using it since it was created and I like it