I have some MOV quicktime files that look fine in preview, when I move them over to program they get a letterbox around them. How can get the files to view in full frame in program?
View 2 RepliesI'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
Or - I remember that in FCP7 there is an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
I was given footage that was shot in 640x480, though the video is still in a widescreen format and has letter boxing. My boss would like to have just the video footage without the letter boxing at the top and bottom of the screen. How do I change the frame size of the clip so that only the video footage can be seen?
I am fairly new to the this and am learning by playing around with the software. I'm working with Premiere Pro.
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
Sometimes when I view vector art on the screen the letter I shows up extra wide and big, but the printed version works fine. Example below. This only happens some of the time to me, but not always with the same piece of artwork. I think this must be a common problem.
View 8 Replies View RelatedI have a project with many different blocks of text, and colors changing from letter to letter within words.
How do I identify what any given color is?
When I click on a letter, it shows me a visual block of the color, but doesn't tell me what the corresponding color number is.
Problem being, if I see one letter and want to take its color to use it elsewhere, I have no way of knowing what that color is.
There appears to be a significant difference between the image in my Source monitor and my Programme monitor. About 2stops. Might not look much when scaled down, but conspicious when on full scale.
View 7 Replies View RelatedAfter installing the trial version of Premeire Pro I've been trying to make a quick test video using an MP4 file on my computer. I've been able to successfully import this file into Premeire however I am unable to see this video in the Source Monitor and the Program Monitor (after having added it to a sequence). I've tried re-encoding the file in AVI and WMV formats however neither of these two worked either. I've also tried just bringing in JPG and PNG images and have be unsuccessfully in viewing these as well. I have however been able to export a still image using the Monitors. So far after about 3 hours of googling the only possible answer to this issue I have been able to find is that Premeire requires 2 seperate harddrives to work; However this seems inaccurate as the program has made no attempt to warn me or even check to see if the computer I am using it on had 2 hard drives during install and start up, nor do I remember seeing it in the listed minimum requirements on the Adobe website. I am more than happy to view a lower quality preview so long as I can actually see what I am doing before rendering in a higher quality.
View 2 Replies View Relatedi have cc 7.2.1, and every basic operation i do on the timeline , moving clips, trimiming, scrubing on the timeline everything lags, its not fluid. When i do a simple scrubring on the timeline, the CTI takes sometime to get to the position i selected to do the playback.
But the worst part is the trimming or moving clips, it takes ages before i get an image on the program monitor. If i move a clip into a middle of 2 clips it takes ages to see those two little privews images with timecode, to see where to put it. So is very hard to edit like this.
Another odd thing is when in redering mode i select to use sofware only i dont have drop frames, when i chose cuda i have drop frames!!
I´m editing h254 from a 5d and 7d on externa llaccie usb 3 , have the a macbookpro 16g i7, iris pro and nvidia 750m, and a external samsung, via DVI.
I was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline.
View 4 Replies View RelatedWhen I try to create a sequence the program stops working and force quits, I have a school project due!!!
View 2 Replies View RelatedFollowing previous LR upgrades (3.2, 3.3, 3.4, 3.5 and 3.6), old files were automatically removed from the Program Files folder. However, I just upgrades from 3.6 to 4.0 and notice that the old files are still on my hard drive in the 3.6 folder. Do I need to keep these files or can I UNINSTALL LR 3.6?
View 5 Replies View RelatedI would like to be able to see all the attachment images in my mail program on my mac.
View 3 Replies View RelatedI need to view a block definition from an out-of-process app (written in C#).
The app uses True View Acctrl to as a viewer.
It works fine for whole dwgs, but when it comes to viewing just one block definition' the best I could come up with was:
<pseudo code>
start a new Autocad instance;
open the dwg in Autocad;
perform a Wblock of the block definition to some temporary file;
open and view the file in the Acctrl;
erase the temporary file;
</pseudo code>
It seems clumsy though.
Is there any API for doing this? (preferably not higher than Acad 2008)
I work with the latest version (7.2.2) of the application on a Windows PC.My configurations are the following:
Intel i7 2600k @ 3.40 GHz
16GB DDR3 Corsair Vengeance @ 1600MHz
120GB SSD Samsung 840 Series Basic
Sapphire ATI Radeon R9 270 2GB VRAM
I have the latest drivers installed.The crash occurs as soon as I try to switch from list view to icon view in my project browser. The thumbnails come up but Premiere crashes with a serious problem notification shortly after (no further infos whatsoever).
I've tested my RAM by using MEMtest86: No errors. I have narrowed it down to my graphic card. I plugged it out for testing and had no problems with the icon view. The graphic card has currently the AMD Beta-Driver (14.3 Beta) but that didn't work. Before that I had the 13.12 version installed. I've also tried switching the Open_CL Support off.
I've been getting a "Serious Error" message consistently when using Premiere Pro CC on my Macbook Pro. It only seems to remedy itself after a system restart, but eventually it will happen again. Most recently it happened after I used After Effects without issue. Here are my system specs and a copy of the error log.
View 1 Replies View RelatedWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedIn the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies View RelatedIf I add markers to a source clip and enter a name, then when I open the Markers panel, I only see Comments listed, not Names?
View 4 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedWorking on a 28:30 project with 8 hours of footage shot over 13 days. I have seperate bins for each day. Some bins are displaying the clips in reverse order while in thumnail view and I cannot change it to be in sequential order. I've tried sorting it in list view first, but that doesn't work. I have the latest version of Premiere CC.
View 3 Replies View RelatedI downloaded PSPX4 from the Corel site where I bought it. It is in my Downloads folder instead of Program Files. Then I copied it to program files and it still isn't even in a folder called Corel. How do I get it where it should be? And, I cannot find all the folders then go with it, like tubes, brushes folders etc.
View 2 Replies View RelatedI've been trying to figure out a way to open all of my old .pdn files in another program. It doesn't matter if it's a .psd or image file or anything, I just need to convert it into something I can actually use.
opening paint.net to convert the file. Well, great, but the files are leftover from when I had a PC--I have a mac now and couldn't download the program if I tried. Is there anything I can do?
I have used Lightroom as the default program for both .psd and .cr2 files. After installing Version 5.3 update, the file association was broken, and I have been unable to reestablish the association.
View 1 Replies View RelatedHow do I change a specific file type association in Bridge CS5, namely the .psd file type? I had installed Photoshop CS6, but am unable to use it due to extreme slowness (another problem, not for this question). I have reverted to using Photoshop CS5 and Bridge CS5.
Now when I double-click on a .psd file in Bridge CS5 to open it (or right-click on the .psd file) , the file opens up in the glacially slow CS6. I went to edit> preferences>file type associations to change the association to Photoshop CS5, but .psd is not listed as a file type (.jpg and .dng and a host of other file types are listed). How can I change the association if I cannot find the file type? (BTW: I have changed the file type association in Windows Explorer; I am running Windows XP.) I know I can open PS CS5 manually and scroll to the image I want to open but, to my mind, that defeats one of the main purposes of Bridge.
Since upgrading to Mavericks anytime i try to open files by going to file,open it says "Could not complete your request because of a program error".. I have uninstalled and reinstalled and also tried using the cleanup tool but still getting that error. I am using an iMac 27".. Also tried resetting preferences, still no luck.
View 2 Replies View Relatedcan't find my icon even in program files.
View 3 Replies View RelatedIm having problems with the adobe creative cloud. When I try to open files in photoshop I get this "Could not complete your request because of a program error."
View 8 Replies View RelatedI've been doing some MTS editing for my boss, and have been using the proxy file feature as my PC doesn't run the videos properly without using DXVA (would be a nice feature, by the way. my media players use DXVA just fine but VideoStudio won't let me use it's hardware acceleration.)
Anyway, when I finish up for a day and save my project, render the final files, and close out the program, my proxy files get deleted by the next time I load it up. I can use these still, as I often need to go back to change things in the edit, and remaking them every time is kind of a waste of time. Is there a setting somewhere I am missing, or does VideoStudio just always delete these files when it decides to? I'd like to keep them around and have them selectable and usable as long as I say, not how long as it says.
Recently purchased a new plotter thats 32 bit. Problem is, my Win 7 is 64 bit, holy smokes! so the two wont work together.I cannot even download the plotters installation process. Was told that Corel Draw can bridge the two correctly so I am leaving Letter Art and joining the Corel Draw family. I have a few questions concerning this matter. First, can Corel actually bridge these two? Second, Letter Art saves their files as gnt, showing up in My Documents as sym (go figure) so knowing that Corel can import all types of files, can they import pcx, sym and/ or gnt as well?
View 4 Replies View RelatedI have only just started using AutoCad and all of a sudden my program will not open and save files anymore without, without me typing in the whole filename string. Is there a way of resetting this as it has never done this before?
View 4 Replies View Related