We installed ACA 2012 a few weeks ago on computers running Windows Vista Business 64-bit. On one of our machines, the Detail Component Manager was working fine and now when we go to insert an object the insertion fails with a *cancel* appearing on the command line.
I have checked all of the file paths and folder permissions and everything is fine. Microsoft.Net Framework 4 Client & Extended is installed as along with Microsoft.Net Framework 3.5 SP1.
I just started using version 2010 (I was using 2009 way past the 2010 release). Whenever I go to insert a detail component such as a 3/4" bolt it fails. On the command line I see the name of the detail to be inserted but immediately after is *Cancel*.
I have to shut down Architecture and restart it before it will let me insert the component -- and then only once. If I want to insert other components I have to shut down and restart every time.
How do you modify the database and generate the size of items needed within the software from the Detail Component Database? Can you Adjust sizes? Are there more items to select?
We are using Autodesk Architecture 2013 running on 64bit Windows 7 workstations. When I try to access the Detail Component Database I get an error message stating the AecDtlComponents (US).mdb will not open. I went into Tools-->Options-->AEC Content and tried to Add/Remove a database but the list was empty. When I try to Add a database I get the same error message AecDtlComponents (US).mdb will not open.
I recently installed Building design suite premium and I am just getting around to getting it configured. I was trying to open up the detail component manager and have been looking for the default tool palletes for detailing and they are missing. In AEC content the path to the databases are there but I can't find where to access the detail component manager or tool palletes. I can't even find the tool catalog to bring them in that way. It says to look for the detail panel in the ribbon but guess what, I don't have that panel nor do I have the option to show it in the ribbon.
I have also searched for a command line command to open the manager and I couldnt find that either.
We are running ACA 2001 on WIndows Vista 64 bit. The Detail Component Manager will not open on (2) of our (7) machines and returns the error message: "Specified cast is not valid". The files are located on each machine. I have tried running a repair; I have copied the Detail Component Manger files over from the good machines, and I have also run a re-install and the Detail Component Manager still will not work.
My detail component manager in AutoCAD Architecture 2011 was working fine until I installed Revit 2013 on it (as part of Building Design Suite 2013). I have tried uninstalling and reinstalling MS .Net framework, but it has not worked.
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
I am having a problem getting my the line weights to upate when I re-load a Revit Detail component back into a project file. The item on the left is the detail component in the family editor and the image on the right is the detail component.
There are no overides set in the visibility setting for detail items-> [name of the line work], however, when I do overide the line weight in the view for the line work, it doe change.
I've been doing some family as an independent construction detail revit model, I think that is the most appropriate type of detail component. Graphically everything right but I encounter the following problem, all built to type text is not visible in the project then.
How do you control the display? or do you like I can put a text in a detail component family? and if not visible... why would have the option of make texts? Is the only option to annotate after in the project insertion?
I've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
I am trying to create a ball valve that looks like the following:
To get the filled in portion, I created a detail family with a fill. All appears to be well, until I load the family into a project. Then the detail dissappears. The lines remain, but the filled ball is gone. This happens when I am looking from the floor plan view.
If I look at the valve from an elevation, rotating it to see it properly, the filled ball is back.
If I change the family type from Pipe Accessoies to something else, for example, Duct Accessories, the filled ball appears as it should.
Is there a reason that Pipe Fittings and Pipe Accessories do not show detail components in plan views?
I'm using Revit 2014 and I've attached my valve family.
I am using a fairly old Lisp to generate section arrows, started using this in 2000 and up until 2011. Since we have installed 2012 the routine does not work correctly, after inserting block with attributes instead of bringing up dialogue box it inserts next line of string in to the dialogue box. I have attached lisp routine and blocks
I never saw it prior to installing SP2 on 2012... (currently downloading SP2.1 to see if it fixes the issue...)
I have two viewports on the same sheet, one at 1"=30', and one at 1"=100'. Cogo Point symbols/labels will print correctly on one viewport, but not on the other. It seems to be related to whichever one I went into last. If I go into the main viewport at 1"=30', then the Cogo Point labels/symbols in the 1"=100' viewport turn very tiny when issuing "Export to Autocad 2010". If I go into the 1"=100' viewport last, then the Cogo Point labels/symbols in the other viewport blow up into huge gigantic things.
I've NEVER seen this behavior before. It's getting incredibly frustrating, since our client requires a plain AutoCAD 2010 drawing, and the Export feature is flat-out not working anymore. And if I try exploding Cogo Points prior to exporting, then they disappear from the Point Table.
I'm a school teacher in the PLTW program that uses Inventor extensively in my classroom. Our district operates under a 125 seat license. The issue I've run into is on my personal computer (Windows Vista, x64) and is therefore outside the realm of the usual IT guy's duties. The Inventor software was installed on my laptop by the PLTW training staff during my summer session. I *think* it is a stand alone install of the program.
What happens is after I launch Autodesk Inventor, I can see the splash screen, and the inventor.exe task appears in the task manager, however after a few seconds, the splash screen disappears and the program does not launch. There is no error message.
This is confusing since until quite recently I am sure that Inventor was working hunky dory. Also, all the other Autodesk programs seems to function normally (Fusion, Design and Review)
I've tried a repair and reinstall, but the problem still persists. Also, I updated the install with SP 1, but this had no effect either.
I have recently updated my display drivers (ATI Radeon), however, I tried reverting back to the older drivers and still the problem persists, so I don't think it is graphics driver related
I have repeatedly attempted to export a simple drawing as a PDF and it doesn't take. I get an error message that the plot failed because there is nothing to plot (paraphrased).
Does export as a PDF not work or not in the Student version or?
Since yesterday, when I try to draw any of our custom wall types all I get is a standard wall type image (rectangle only). None of the detail or component colors are displayed. When I start creating the new wall, the detail displays until I click at the end of the wall, then the detail disappears. When I ID an existing wall and a newly created rectangle the properties all match. I can copy and mirror existing wall and the correct display is retained. All of the existing walls in the drawing display and print correctly. The newly created wall print only the rectangle. Medium detail settings are in place. This has to be a local setting problem on my computer because others in the office can draw the same new wall in the same drawing and get all of the detail.
I have used the Content Browser sparsely in the past to drag and drop items to a tool palette....but I was thinking it may be a go location to manage our detail library....
As a test i had tried to drag or copy past autocad details into the content browser with no success. I suppose there is a process to make linework usable for the content browser.
Do i need to convert the linework into a multi-view object and then drag it from the style manager into the content browser?
I've got a wall style that has multiple components. I have changed one component so the bottom starts 12" below the baseline ht of the wall.The section window display reflects the change, but the wall style won't update.Is there a setting I'm missing somewhere.
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
I am attempting to use the Weld symbols routine from the detail palette. All the symbols are being created an enormous size. how to reduce this insert scale.
I am experiencing problems with AutoCAD Architecture when drawing a standard wall. When I change the display to read High Detail nothing seems to change - I cant see the hatch patterns for brick/block.
I have a blown out detail on one of my Inventor drawings, I would like to toggle the visibility of some parts in this detail view however when I RHMB these under the browser I can't turn off the visibility
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
