I am encountered below error while creating a data connection
An exception occurred in FDO component
ORA-12154: TNS:could not resolve the connect identifier specified
Desrver details -
IIS – 7 on Windows 2008 64 bit
Autodesk Infrastructure Map Server 2012 64bit
I have had numerous application errors which result in the PS CS4 shutting down unexpectedly. 1 such error message: "The exception unknown software exception (0xc000000d) occurred in the application 0x78138a8c". It happens repeatedly when I try and create Brushes, when I open normal jpg files, when I create new file. There seems to be no direct correlation between an action and a crash. (I have worked on CS2 with nothing like this ever happening.)
View 14 Replies View RelatedI have been using AutoCAD 2013 for 2 days now, and already the new version seams so unstable! lots of errors every where!
sometimes the file gets stuck, and while you draw the file looks empty, yet when you restart autocad, you see everything you didnt see drawn.
yet this doesnt appear all the time, but the error I will be discussing does:
Try enter CUI and set the Quickcalculator pallet to appear on the right or left side of the screen. Close the CUI, and everything is going fine, and the pallet appears normal. Yet close Autocad and start it again, and an error will appear on start it says this:
"Unhandled exception has occurred in a component in your application. If you click Continue, the application will ignore this error and attempt to continue. Width and Height must be non-negative."
and the Quickcalculator pallet will appear floating in the middle.
I tried everything, but no use. The same error over and over again. This didnt happen in older versions and no big changes happned to the CUI interface, which makes me conclude its a bug.
I just installed an educational version of Autocad 2014 for school and am encountering some major problems. The program works fine at first, but after I close it and reopen the application it starts to bug out. If I try to ask my layers after I reopen the program, Unhandled exception has occurred in a component in your application.
If I close the program and try to reopen, the opening screen gives me the same error message. I've installed and reinstalled the programs multiple times over the server, but still no difference.
I was trying to create an alignment from a polyline to further create a profile, and I keep getting the following message:
; error: Exception occurred: 0xC0000005 (Access Violation)
; warning: unwind skipped on exception
; error: Exception occurred: 0xC0000005 (Access Violation)
Then I started 2013 Civil 3D as an administrator and I got the same error.
After installing Windows 7 (not an upgrade), the Installation routine stops on The first disk and Then declares a Pop Up Error 1395: An error occured during the installation of assembly component.
{AE56AAF5-F3C0-3D4B-8859-A1E50A3E27BF}. HRESULT: 0X80070BC9.
The install routine then executes a "roll back" functions and shuts down.What do I do to re-install my software? Of course, I do have the 24 digit installation SW Codes as verified on my Adobe member account
why I'd get this error when doing an Export to AutoCAD 2010/2007/2004...? It seems to be innocuous, and irrelevant, but it's disturbing none-the-less. I haven't been able to identify any reason why it appears, and all drawings seem to work normally, with no problems. AUDITs turn up no errors. So I've just been ignoring this message, but it's distracting. And it doesn't always appear... although I haven't been able yet to identify what causes it to appear in some drawings, and not others. I think it only ever happens when there's an XREF, but not sure... (Maybe when an XREF is in an older version of C3D/LDD/AutoCAD...?)
View 9 Replies View RelatedI had this leader sub in my 2010 . now I am getting error in 2012 right on Myleader.EvaluateLeader.
View 6 Replies View RelatedI've recently ported some code from VS2008 and AutoCAD 2010 and realized that the eNotNewlyCreated exception continues to be raised when inserting blocks in a loop using AddNewlyCreatedObject in code that I'm pretty sure is only being called once.
View 5 Replies View RelatedWe installed ACA 2012 a few weeks ago on computers running Windows Vista Business 64-bit. On one of our machines, the Detail Component Manager was working fine and now when we go to insert an object the insertion fails with a *cancel* appearing on the command line.
I have checked all of the file paths and folder permissions and everything is fine. Microsoft.Net Framework 4 Client & Extended is installed as along with Microsoft.Net Framework 3.5 SP1.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf.
[code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
I'm using AutoCAD 2012 version 18.2. I need to programmatically open .dxf file, change font and save as .dwg version AC1800. I do it with the following code [URL] .... The problem is that after saving as AC1800 and open the result file, Autocad says that some errors occurred and offer to recover file. After this it works fine. If I save as DwgVersion.Current or DwgVersion.Newest it works fine.
View 6 Replies View RelatedIs there anyway to shut off the notification window for errors occured during update? I am swapping parts in an assembly so I know constraints will have to be repaired, but it doesn't work that I have to click on the 'accept' button everytime I move an object
View 1 Replies View RelatedI got this message in the Map Message dialog box Messages An error occurred while saving the drawing Message details eHadMultipleReaders
View 6 Replies View RelatedI've been using ACAD LT 2013 successfully, until the message started flashing on my screen "Sync Error, A customization sync error has occurred" It does not allow me to turn it off.
View 3 Replies View RelatedEvery time I export a C3D drawing to ACAD (command: _AecExportToAutoCAD20xx), I get this "error message"
There does not seem to be a real problem because I can open the exported drawing in vanilla AutoCAD OK, (although I do still get a proxy notice..?).
A few other older threads about this reveal no solution or confirmation that this dialog is a bug.
[URL]
I am using AutoCAD Civil 3D 2011 and everytime I export a model to AutoCAD format I get the message:
"Warning and error occurred during save. We recommend that you run RECOVER on the drawing"
Although it usually finds one fault during Audit or Recover and fixes that, the message still persists in appearing every time I use the export function. Why this happens and how I can sort it out?
I am copying objects to a new database and and cloning as an Entity type succesfully for all objects.When I save the database to a new file I get the attached error
'Warning: An error occurred during save....'
I have isolated this to Polylines and have tried to Process as Type PolyLine but still get the error.Here is the code I use for the polyline.(My entity processing code is identical except for object type).
Dim MyPolyLine As DatabaseServices.Polyline MyPolyLine = CType(myObjID.GetObject(DatabaseServices.OpenMode.ForRead), _ Database Services.Polyline)Dim NewEntity As DatabaseServices.Polyline = CType(MyPolyLine.Clone, _ DatabaseServices.Polyline)NewEntity. Set Database Defaults(NewDB) NewBTR.AppendEntity(NewEntity)NewTrans.AddNewlyCreatedDBObject(NewEntity, True)NewEntity.Layer = MyPolyLine.Layer NewEntity.Linetype = "ByLayer"NewEntity.Material = "ByLayer"
we've made a part from an assembly and put the stress analysis to the test. Unfortunately the analysis doesn't complete it's run, because of an error:
"An error occurred while creating the finite element mesh. The cause may be invalid geometry or features that are extremely small in comparison to the overall dimensions of the part. To fix the problem, please suppress those problematic features or use standard meshing method."
We can't change the thickness of the sheet-metal, because it's a model which comes from a supplier with a different cad-program. And supressing any features isn't possible, because it's a base-solid.
But where can we change it to the standard meshing methode? The program is recently re-installed on my computer, the settings haven't changed since it's been installed. We can't find the feature.
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedIf you key in CUI, and change the "Command List" to "All Commands and Controls", an Unhandled Exception is generated.
See attached.
I went into an assembly to change some parts and sub-assemblies and now everytime I move a part or constrain something I get this message "Errors Occurred During Update". Why is this happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD was working fine on my machine for several months, and now I'm getting this error.
Exception in acmgd.dll ARX Command
Tried repair, resinstall, then uninstalled and installed again, and this keeps coming up.
Using VB.net to run a standalone program that launches Inventor at the beginning. I have recently moved the program to a new computer, and all of the sudden I am getting these errors. The message box below the program reads "A first chance exception of type 'System.Runtime.Interopservices.ComExceptopn' occured in mscorlib.dll.
I turned on the exception break command when those kinds of errors occured, and it stopped on the first line of the startup of Inventor code.I have added my reference to the autodesk.inventor.interop.dll already.
I am new to developing with this API but not to VB.NET. I am trying to associate mtext to a leader using the instructions in the AutoCAD .NET Developer's Guide (115) for AutoCAD 2012 but keep getting the eInvalidInput exception. One suggestion is that an exception is thrown if the mtext does not exist but I checked the mtext objectid for null and valid which returns good. I am certain that I am missing something but not sure what. I have included my source; the exception occurs at: acLdr.EvaluateLeader()
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()
Dim acBlkTbl As BlockTable
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead)
Code] .........
I have recently moved to 2014Lt.
When I open a second file both go super slow. I didnt have this problem with 2013.
It often then crashes the recent error no is d686468fh.
I created a vb add-in that creates standard sheet setups using a .pc3 file called BATC PDF.pc3 . (This .pc3 file was created using the DWG To PDF.pc3 plot config - Margins were set to 0)
The add-in accomplisheds the following :
Queries a database for all of the blocks and associated attributes that our company has used over the past 20 years for Drawing FormatsDetermines if any of the blocks (formats) exists in the drawing.Determines if any of the plocks overlap and warn userDetermines the appropriate sheet numbers for plottingCreates a standardized (by name) plotCreates a Drawing Sheet Description file (DSD file) that contains all of the sheets in the appropriate order (all sheet desctiptions usually exist in the same drawing file and the same drawing layout.Leverages the Publish Engine (Autodesk.AutoCAD.Publishing.Publisher PublishExecute method to publish contents leveraging informaiton in the DSD
I am testing the application functionality with a wide variety of our AutoCAD drawing library. I have ran into some anomalies with some of our drawings that have a large number of sheets:
Exceptions obtained Random) - via .dll (Random FATAL ERROR: Unhandled Access Violation Reading Oxffff Exception at ........No exception - using CommandLine "Publish" using DSD created by routingNo exception - via Visual Studio debugging (speed via debug infrastructure is 1/10th publish speed)
Routine works well with drawings that have smaller sheet counts(10 or so) sheets.
I am configuring the Visual Studio solution so that it can be executed without the supporting database
I have an Unhandled exception 80000003 whenever I open Autocad.
View 2 Replies View Related