I've recently installed AutoCad 2010 and I recieve this error when trying to save an existing drawing using the save as dialog. It has no problem saving as long as I do not change the name but when I attempt to rename the drawing it gives me an error. FATAL ERROR: Unhandled e06d7363h Exception at 7c812afbh
The computer is brand new, a dell work station T1650. Running 2010 CAD program crashing randomly and over 100 times for this past week. Any clue based on the error code?
Fatal Error: Unhandled e06d7363h Exception at fd059e5dh
Upgrading an old machine that is setup to run scheduled tasks that open autocad and run autolisp programs periodically through out the day. It's our little robot that runs by itself in a back room. This machine had AutoCAD R14 on it and has been running fine for years. With the new machine we upgraded to AutoCad 2012, which has unfortunately created some problems. The major one being a fatal error that we can't seem to fix.
The Problem - One of the Autolisp programs is a fairly simple routine that reads a dat file containing pertinent information, it steps through this dat file one line at a time and draws a shape, saves it, erases, draws the next one, and so on. There's typically ~150 items it draws. But it's never making it through. It will create about 90 drawings and then the Fatal Error appears, crashing AutoCAD every time.
What I've tried - Searched for this error and found one thread about possibly corrupt .NET, so we've tried reinstalling .Net Framework (twice) and it had no effect. There was also mention of a possible graphics card/driver issue and to try running with no hardware acceleration. This did nothing which was of no suprise since I'm only receiving this error during this specific scenario, acad runs fine otherwise.
Windows XP, Acad2012, it's running under a classic workspace in single drawing mode.
We are currently putting the old machine back to work until we can find a fix. If you have any questions about the set up or anything, ask away.
When opening the navigation bar, the error message: unhandled exception error C0000005 (Access Violation Reading 0x0144) at address 5E03F5BFh or 5DFAF5BFh. What does this mean? The program (AutoCAD 2012 student version German 64 Bit) crashes as well when creating a new file and open the existing files in the registry file Karter. I have a Toshiba Satellite C660-29V with "IntelCore i3" processor and Windows 7- 64 Bit. Graphics Controller: Intel (R) HD Graphics Core (i3). Driver: Driver Version: 8.15.10.2189 Driver Date: 28.07.2010
How can I fix it so that AutoCAD 2012 running properly?
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
There are specific files in which will cause this fatal error to come up:
"FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 5c88cd29h"
I am using AutoCAD 2010. I am able to open the file in other computers in the office, even in another AutoCAD 2010, but it consistently gives me this error on my machine. I've tried purging the file and recovering it, but nothing seems to work.
I have had numerous application errors which result in the PS CS4 shutting down unexpectedly. 1 such error message: "The exception unknown software exception (0xc000000d) occurred in the application 0x78138a8c". It happens repeatedly when I try and create Brushes, when I open normal jpg files, when I create new file. There seems to be no direct correlation between an action and a crash. (I have worked on CS2 with nothing like this ever happening.)
I just got AUTOCAD 2013 and I have problem using MOVE command. With my previous version AUTOCAD I was able to move one by one every line from the object I created. Now with the new version when I use MOVE command, not only one line is moved, it is moved the whole object (Like the object is a block, but is not).
How can I move only one single object from my drawing?
After I choose named UCS, the view rotates accordingly. Sometimes having named UCS as orthogonal works but I still prefer having world axis as orthogonal in my monitor. How to change default?
my command bar is stuck in the middle of my screen and it won't allow me to dock it at the bottom of the screen. Nor will it allow me to move or resize it(They're both grayed out.). Yes, the allow docking toggle is enabled and it does allow anchoring both left and right. I've tried everything I could find through F1.
I am running AutoCAD Map 3D 2011. When i use the ID command to acquire x,y coordinates by snapping to an object, it gives me only one decimal place. When i do the command out in space, it gives me 4 decimal spaces. I need to get at least two decimal places while snapping to objects. Examples below:
id command (out in space, not using osnap)
X = 4006431.3366 Y = 359556.5635
id command (snapping to entity)
X = 4006252.3000 Y = 360712.5000
by the way, my units precision is set to .00 and it doesnt seem to make any difference with the id command.
I have been using the MVSetup command to adjust a view port orientation however when I do this the Pickfirst command is changed to 0 - it was only by chance I discovered this and was able to change it back. Also, is there a command to reset all changes made through MVSetup in a viewport ?
I'm a designer working for a company that specializes in pressure vessels. I accidentally stumbled upon a Youtube video showing the capabilities of the 'pv' pressure vessel command.
I used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
I'm using the ED command in AutoCAD 2012. I have my texts verticals, but I want to edit them in horizontal position, however when I active the command and I select the text, the edit option appears in vertical position. What can I do to control this option? Is there some variable to control this option?
Why is my command-bar limited to just 80 characters, when by the looks of it, it could easily fit 200 characters in before having to use a second line of text?
I often want to copy the filepath of the current .dwg and paste it into explorer, but it only pastes the first line of text!
See attached .jpg or text below
Your current drawing filepath is M:196493-CADOPV 3-Entwurf 5 PVModelLAG_AUS_1989_0000_LAGEP_BAUP_XXXXXXXX_MS001_20130321-Synthesis-Plan-Of- pipelines_AB.dwg. command:)