I just got AUTOCAD 2013 and I have problem using MOVE command. With my previous version AUTOCAD I was able to move one by one every line from the object I created. Now with the new version when I use MOVE command, not only one line is moved, it is moved the whole object (Like the object is a block, but is not).
How can I move only one single object from my drawing?
When I use the move command to, let's say, to move a floor plan (drag to new location on the page), some of the lines in the "moved" floor plan are either skewed or missing. I'm able to "cut and paste" as welll as "copy with basepoint" w/out problem.
See attachment below.
How might I correct this problem?
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
Having never used this command before I am struggling as to where it is located.I imported a U-Bolt in Solidworks format and I am just trying to move the nuts as indicated.
View 5 Replies View RelatedWhenever I use the move command on a line or series of lines that are touching other lines, the lines that aren't part of my selection move with that one line. cad-movecommand.jpg Here's a series of screenshots showing what I mean. I can't move just that line without moving the other lines around it.
View 3 Replies View Relatedget any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
Currently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
Before I upgraded to AutoCAD 2014 (was using 2012) when I used the MOVE command on 3D geometry (while using the Realistic Visualization) I could see one object move into another. Like, moving a cylinder into a box to represent a button, and I would see it slowly sink into the box as I moved it further and further along.
In 2014, the object I am moving will REMAIN ON TOP visually of all other geometry until it is completely inside the other geometry (at which point it disappears completely). It's hard for me to then judge just how much of it is sticking out during the MOVE command. Once I complete the move command, the proper visualization order is then shown.
In other words, if I have a 10 inch cylinder, and I'm trying to move it into a box so only 2 inches sticks out (as a visual guesstimation), currently I would see ALL 10 inches of the cylinder whether part of it is inside the box or not, until I complete the MOVE command.
Not sure as to why this is happening, but like the title says anytime I use move or grab a grip point my osmode automatically changes itself to settings that I do not want. I can change my osnap settings while in the command to set them back to what I had originally had but this is very tedious and I have not experienced this with previous versions of acad.
From all my searching, the only thing I can come up with is; it is a setting within the acad1014doc.lsp but I am not sure.
I use the following code to assign a reactor to an object:
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
"reactor_upd" is the name of the function that starts every change or delete the object.
I would like to exclude the command "MOVE", ie if I move the object, I do not want that part to the"reactor_upd" function.
Civil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies View RelatedI am going to collect objectid's of the moved items in drawing after they moved to destination. So I wrote an event to monitor move command , by using object modified event handler. when I run below code for every entity it collects 2 object id. One before move and one after move. Is there any way to just collect object ids after they moved?
Class EVENTS
Dim MyDwg As Document = Application.DocumentManager.MdiActiveDocument
Dim Myed As Editor = MyDwg.Editor
Dim Mydb As Database = MyDwg.Database
Dim Myobjidcoll As ObjectIdCollection
[Code]....
I am getting these white "ghost" boxes with every copy, move or mirror command. They can be individually deleted but that takes too long. The more there are the slower each command takes, to the point a copy can take over a minute. If I save and close then when I reopen they are gone -- until I execute a command. This is unique to a single file I recieved from a friend using a PC based Autocad; I use Autocad for Mac. I had no trouble with his file until I did a "Save As" and used it as a base for a new file. Now, every file that is a copy of it, even any file in which I x-ref it, has the same problem. All of my original, older files are fine. There is simply too much work in these (now) five files to start over. See attached.
View 3 Replies View Relatedi have always used spacebar+command/alt to zoom in/out but now suddenly its not working..! command+spacebar now toggles the MOVE tool...!? spacebar+alt is still zoom out, and i noticed that the right command+spacebar is still fine but i just cant get used to using it i have always used the left command+spacebar....
View 5 Replies View RelatedHow can i disable the automatic move command? when i choose the move command it automatically moves whatever element that's selected, using the previous dimension used to move something. Big Problem.
View 8 Replies View Relatedtrying to move a picture and I get "could not complete the Move command because the result would be too big". It is the only layer.
View 2 Replies View RelatedHow to know in which bar a certain command is?
For example, if in need to know the bar in which the command “Align” is, what to do that?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
MY AI is freezing, not allowing me to move or adjust, rotates without command. Just not listening . Sometime it will move other times cursor not responding.
View 11 Replies View RelatedI am using Photoshop Elements 9 and the "move" tool is not working. The Auto select layer box is checked and I have rebooted the computer and reset the move tool. I keep getting the error message "Could not complete the Move command because of a program error."
View 8 Replies View RelatedAutoCAD was working fine on my machine for several months, and now I'm getting this error.
Exception in acmgd.dll ARX Command
Tried repair, resinstall, then uninstalled and installed again, and this keeps coming up.
I seem to have lost my command bar on my AutoCAD 2012 drawings. I looked into Options and can not seem to find the command to turn it back on.
View 1 Replies View RelatedAfter I choose named UCS, the view rotates accordingly. Sometimes having named UCS as orthogonal works but I still prefer having world axis as orthogonal in my monitor. How to change default?
View 2 Replies View Relatedmy command bar is stuck in the middle of my screen and it won't allow me to dock it at the bottom of the screen. Nor will it allow me to move or resize it(They're both grayed out.). Yes, the allow docking toggle is enabled and it does allow anchoring both left and right. I've tried everything I could find through F1.
View 8 Replies View Relatedhow to use the sweep command
View 9 Replies View RelatedI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I was recently upgraded from AutoCAD 2005 to AutoCAD 2012. I set my interface to AutoCAD Classic. When I check the Measurement Tools (toolbar) the ribbon appears, but I can not move the toolbar. I run two displays, so the the measure tool shows up on one all the time.
View 2 Replies View RelatedI am using autocad 2012 new.. i hav problem with MOVE!
i am selecting an object to move but rather than moving it alone its moving like stretch!
I`ve a problem when i`m using the stretch commend, for istance to move the position of a wall opening done with a poliline and there`s a door or a window block within the stretch area, this object stays in the original position whereas the lines has already been streched. This makes that I`ve to move manually the block to the new position. Is there any way to stretch objects and blocks together?
View 8 Replies View RelatedThis is my Dynamic Block with attributes.But when I will stretch or flip the block the attributes will stay on the original positions.
The attribute mode is on locked so I don't get it. Any way to link the both attributes, so I only have to fill in the value for once.