get any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
When I copy/drap an artboard, most of the time a random shape(s) will move around a arbitrarily. Why?
View 2 Replies View RelatedI am getting these white "ghost" boxes with every copy, move or mirror command. They can be individually deleted but that takes too long. The more there are the slower each command takes, to the point a copy can take over a minute. If I save and close then when I reopen they are gone -- until I execute a command. This is unique to a single file I recieved from a friend using a PC based Autocad; I use Autocad for Mac. I had no trouble with his file until I did a "Save As" and used it as a base for a new file. Now, every file that is a copy of it, even any file in which I x-ref it, has the same problem. All of my original, older files are fine. There is simply too much work in these (now) five files to start over. See attached.
View 3 Replies View RelatedAutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedI'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View RelatedI recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I don't need or want the drag and drop (DROPGEOM) command. I never use it because it is much slower than simply using the move command or grips. But some times when I am going faster than the computer I accidentally do it and then have to wait while it moves the object and then wait while I use undo to move it back. It can take a really long time if I accidentally move a large xref. So is there some way to turn off drag and drop of autocad entities?
View 9 Replies View RelatedWhat happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI'm having a very strange issue with Photoshop CS5 (both 32-bit and 64-bit)
When I go to draw anything or move anything, the canvas does not respond to mouse events at all. Right clicking doesn't work, dragging edges of the free transform box doesn't work, even the top menu bar (File, Edit, View, etc) does not detect when I mouse over from one menu selection to another (e.g. moving the mouse from "File" to "Edit")
I have two documents open, both flat (1-layer). Let's call them A and B, with A in the foreground. While recording an action, I bring B to the foreground and see "Select previous document" in the action pane, then select the move tool, and hold down the shift key to drag B onto A and center it.
The action shows "Select next document", as it should. But the move isn't recorded. The history shows a drag took place, but it's not in the action. I've tried this by following the drag with other recordable commands, but the drag isn't recorded. Not using shift-drag doesn't make any difference, either.
Aren't move tool steps recordable in an action?
Running CS6 Extended 13.0.4 on a Mac Pro, OSX 10.8.2.
I have a problem with illustrator. When I try to drag an object with alt to copy, I get a text field. Content of the text depends on the number of items and points.
[URL]....
p.s. Macbook pro, Illustrator CC
Im on AE CC. If I try to command+drag a text layer I get an error that says "( 17 :: 45 ) After Effects error: unable to invert matrix. ( 17 :: 45 )" and the text jumps to some random location.
What is this? I have never seen this and I have always used command to drag.
In Windows Lightroom (3.5 at the moment), if I select one or more images and then, on the left, right click and create a new collection, I'm given the option of creating new virtual copies of the selected images for inclusion in the new collection. I use this all the time.
However, once the collection is created, I've not found a simple, one-step method to add virtual copies of additional images to that collection. Best I've come up with is the three step process: create a virtual copy, drag the virtual copy to the collection, and then remove the virtual copy from the folder/collection where I created it. It would be far cooler if there was, say, a keyboard shortcut, e.g. alt-click-drag or something, that would do this all in one step. Is there such a method?
When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database?
View 2 Replies View RelatedAfter updating to Photoshop Elements 12.1, the move tool can not be used to drag and drop one photo onto another (when more than one photo file is opened).
View 3 Replies View RelatedI'm trying to make an interactive animation where when the user clicks and moves the mouse around an area, the opacity of that part of the layer decreases and the user gets to see the background layer. It's similar to the idea of using a brush to clean a dirty window.
View 6 Replies View RelatedI had the same problem with X5 - then went back to X4.Anyway to fix this problem in X6.
View 4 Replies View RelatedDid 2.8 remove the ability to drag and copy a layer from one image to another? This does not work when I try opening more than one image and dragging a layer between the two images by switching between tabs.
Is there some default box I need to uncheck or some new way to do this?
Every once in a while I print that has two side-by-side images on one piece of paper. My usual routine is to create a new document that is larger than the two images--say, 10x8 (horizontal) with a transparent background and the same resolution as the two images that I'll be placing on the canvas (say, two 4x3's). Then I simply click on the image I want to move and drag it from its layers palette onto the blank background canvas, and move/edit/size as needed.
when I drag an image over to the blank canvas, it assumes the size of the entire canvas. so I just have the image... enlarged. With no background canvas. when I click on the new image (the one dragged to the canvas), all of the editing commands are grayed out. So I cannot resize or move it.I'm on CS5 (mac)
I've seen several adobe tutorials and youtube videos that show moving photos or folders by drag and drop in the library grid view. I cannot get it to work.
Steps:
1. Mousedown on a photo (not the frame) in the grid
2. Drag the mouse to a folder in the "Folder" pane (left of the grid)
3. Mouseup on the destination folder
Results:
Nothing happens. The mouse cursor doesn't change from the arrow. There is no indication I can drag and drop. The photos are not moved.
The photos are stored on a NAS. Of course I can move them around via Windows Explorer, but I want to do this from inside LR4 for obvious reasons. From LR4, I can create new folders, but I still cannot move photos into those folders. I also tried creating a new folder on a local drive. Again, I was able to create the folders, but was not able to move any photos into the folder.
With X4 I can right click a piece of text - with pick tool - and drag the selected text to an open area and the text is duplicated. With X5 this does not work - text is locked. The only way to duplicate is to copy / paste. Is there a setting that needs to be reset.
View 2 Replies View Related1) Is there a way to drag/copy a material from the slate editor into the Environment Map slot in the Environment/Effects dialog box?
Or
2) Is there a way to put a non-assigned material from the Slate editor into a slot in the Compact Material Editor?
I'm trying to put a Env/Background Switcher into the Environment map slot. I FIRST created the Env/Background Switcher in the slate editor (this is simply the order I worked in and found I couldn't go further).
However, from the Slate Editor, I can't copy, drag, or assign this material, whether to the Environment dialog box, an object in the scene (objects won't accept the Env/Bkg Switcher), nor to a slot in the Compact Material Editor. Perhaps I'm missing a button click or a command someplace?
The only way I can do this is to rebuild the material in the Compact Material Editor (start with a clean Env/Bkg Switcher), or click in the Environment Dialog box's Environment Map slot and start by choosing an Env/Bkg Switcher.
* * * How can you simply go from the Slate Editor to the Environment map slot?
I just got AUTOCAD 2013 and I have problem using MOVE command. With my previous version AUTOCAD I was able to move one by one every line from the object I created. Now with the new version when I use MOVE command, not only one line is moved, it is moved the whole object (Like the object is a block, but is not).
How can I move only one single object from my drawing?
I am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
modeling a car in 3ds max on youtube : URL....
in this video he uses holding shift and drag the edge to duplicate/copy the shape but when i want for example create a box,convert to editable poly and select edge and holding shift and drag it not working for me.i remove the face and use only the edges and it works but on that video he has 3d shape and not remove the face! i have 3ds max 2013.
I have a task that I repeat all the time, where I have about 20 digital photos that are all taken of something the same size, at the same magnification, but not centered identically. I then need similarly centered, identical size and shape cropped images for all of the images. In Photoshop, a friend with the exact same task solves this by opening all of the images, making a rectangular selection of the appropriate size and shape by eye on the first image, and then dragging this rectangular selection from this first image into each other open images and hand-positioning in each image as he drags it in, so that all of the selections for cropping the images are the same shape and size, and can be individually positioned, rapidly. This exact solution is perfect for this task, and although it works great in Photoshop, selections can't be dragged intact from image to image in the same way in gimp 2.6.11 on ubuntu 11.04/gnome 2.32.1/linux 2.6.38-8 generic , so I am looking for a way to accomplish something similar.
View 4 Replies View RelatedI found out that my current autocad architect 2011 move command are same with copy command. And also i found out everytime went i start my autocad programe that is an error message like #@%&*&%#@ that i cant even understand.
View 6 Replies View RelatedWhen I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
View 2 Replies View RelatedHaving never used this command before I am struggling as to where it is located.I imported a U-Bolt in Solidworks format and I am just trying to move the nuts as indicated.
View 5 Replies View Related
