I found out that my current autocad architect 2011 move command are same with copy command. And also i found out everytime went i start my autocad programe that is an error message like #@%&*&%#@ that i cant even understand.
View 6 RepliesAutocad 2012 LT locks up when using the copy and move commands. This last for a minute or more then starts working again. The rest of the computer works fine while this is going on. Intel i7 2600 16 GB ram Nvidia G force GTX 460 video card, Windows 7 Home Edition with SP 1 and latest upgades.
View 9 Replies View RelatedI use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View RelatedI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
Just got AutoCad 2012. Commands like Mirror and Copy which involve duplication (no problem with Move or Rotate, for example) will cause AutoCad to not respond for a few minutes. I believe it only is an issue with files brought forward from AutoCad 2000.
View 6 Replies View RelatedWhat happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedWhy are my edit commands (copy and cut) grayed out / unavailable? When trying to copy a selected layer or object, all my editing commands are grayed out and unavailable. Even if I convert something to a smart object, no joy. The only thing I seem to be able to select and copy/cut/paste is text in the text edit mode. makes no sense and is rendering PS unusable.
View 5 Replies View Related1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
I have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedUsing AutoCad 2011. When trying to 'copy/move to end' a 'layout' tab in a drawing, I keep getting the message:
'ERROR:Copy of layout failed'
I have in the past been very successful operating this command in earlier vers of Autocad.
I tried usign the xml export and import it on the other file, the surface comes in fine but the break lines do not come in.
View 5 Replies View RelatedMy entire office has been experiencing drawing crashes as a result of moving or copying certain blocks within a dwg. The problem seems to occur only while executing a Move or Copy command on a block with attributes, and zooming or panning while doing so. My heart sinks instantly because the block will disappear when placed, and I know I am doomed to crash.
I am usually able to pan or zoom a few times, and if I act quickly a Save will work before the drawing then crashes. We have recently switched from 2011 to Civil 3D 2013, and the problem still persists. The two culprits are our slope arrow block as well as hex call-out. Both blocks contain attributes and are frequently used through out our drawings, and this problem proves to be most frustrating when pressed for a deadline.
get any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
Is there a way to change the marker size when selecting objects for move, rotate, trim, chamfer..etc commands?
I have tried Autosnap Marker Size, aperture size and cross hair size from the options menu with no luck.
Normally when I hit move or copy there cursor will change to a square and I can click single items for the command. If I enter "c" on the command line and change to the cross cursor I can select multiple objects by clicking and dragging.
In some drawing the cursor will not change to a square and I can not enter "c" on the command line. I can select single objects but the cursor becomes the standard windows arrow.
Is there a setting / variable in the drawing that can affect this?
When I move any object using move command then dimensions are move with objects but dimensions are stretch and show as long extension line in the drawing.
I have checked DIMASSOC it is set to 2.
I could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies View Relatedmany times, when I copy an object with the a dimension to it. It keeps the base point of the dimension and has a crazy long leg of the dimension that starts from the original place. how can I stop this from happening?
View 9 Replies View RelatedWhat I want to do is to combine two commands, editing (copy, move, rotate) and change layer.
View 3 Replies View RelatedI'd like to locate the PROPERTIES button in the Home Panel instead of, or in addition to, the View Panel. When I go into CUI, it won't let me move/copy it.
View 1 Replies View RelatedI am having nearly 1000 drawings where I need to change the title block in a new format.
I am stuck up in moving all the entities in cordinates 15,280 (upper point) and 205,55 (lower Point) to 275,294 (upper point and correspoing lower point.
When I copy or move an object in a file converted from Microstation to Autocad 2012 the system freezes or slows down to a crawl. If I redraw the drawing in Autocad it works fine. I have a lot of drawings converted from Microstation and I don't need to be redrawing them all.
View 1 Replies View RelatedI found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
Any lisp routine where you can select objects and do a global rotate, scale, etc. from each object's insertion point ?
View 9 Replies View RelatedI am getting these white "ghost" boxes with every copy, move or mirror command. They can be individually deleted but that takes too long. The more there are the slower each command takes, to the point a copy can take over a minute. If I save and close then when I reopen they are gone -- until I execute a command. This is unique to a single file I recieved from a friend using a PC based Autocad; I use Autocad for Mac. I had no trouble with his file until I did a "Save As" and used it as a base for a new file. Now, every file that is a copy of it, even any file in which I x-ref it, has the same problem. All of my original, older files are fine. There is simply too much work in these (now) five files to start over. See attached.
View 3 Replies View RelatedI've created a bezier shape by setting pen to shape mode, set no fill, set stroke and stroke color. as descibed by posteer "Conroy" in a different thread.
I succedded in following an existing line (in a psd document) making one wavey line much heavier by using a bezier shape that fit it using the above settings.
Now I want to copy and move that shape over another faint line to make it much more visible in the same way.
In the inlined image the heavy wavy line on viewers right is the bezier shape made as described. I want to copy it and paste it over the other wavy line on the viewers left... you can see how faint it is.... I could think of no better way to make them heavier and more visible.
I'm not finding a handy way to copy paste the heavy shape/line. How can that be done.
Is there a better way to do this from the start... that is, make the faint lines in psd document heavier and more visible.
I have a ribbon that I'm trying to copy onto my page and it is a png file. I've copied papers that are jpgs just fine. Once I copy the png ribbon it locks and I cannot move it around. How do I either unlock it or is there a way to see where I am placing it on my project?
View 1 Replies View RelatedI'm a longtime Photoshop user in the process of switching to Gimp. I've successfully used Gimp for very simple things like brightness/contrast, color adjustment, and sharpening of single-layer images. What I'm trying to do now involves creating a copy of the background and placing it next to the background image, and I can't figure out how to make it work.
Here's what I'm doing:
1. Resize the canvas to twice the width of the original image, leaving the original image at left. This creates a "blank" area to the right which displays as a checkerboard pattern.
2. The area of the original image is already selected (i.e., it already has a frame around it), so I copy and paste it. This creates a floating selection, duly noted in the list of layers.
3. But when I try to move the floating selection to position it to the right of the original image, in the blank area, it appears to disappear behind the checkerboard pattern.
What's the difference between "import", "copy", and "move"?
View 3 Replies View RelatedI have two enhancements that would really make my day in Photoshop Elements Organizer:
The first would be the ability to move and copy items from one catalog to another. This might entail being able to have more than one catalog open at a time. I could then drag and drop or copy an item from one to another. I have several items in a family picture catalog that more appropriately belong in my genealogy catalog. The only way to rectify this now is to delete from the one catalog and then recreate it in the other.The second would be the capability to stream albums directly to my Smart TV. Windows Media Player can currently do this, but I would have to recreate my albums in Windows Media Player, which seems a waste of time if I have already built albums in the Elements catalog. (There apparently is a way to do this currently using iTunes and an Apple TV device, but I would like to be able to do this directly from Elements). The above two enhancements would be really cool!!