I have a ribbon that I'm trying to copy onto my page and it is a png file. I've copied papers that are jpgs just fine. Once I copy the png ribbon it locks and I cannot move it around. How do I either unlock it or is there a way to see where I am placing it on my project?
View 1 Replies
I tried usign the xml export and import it on the other file, the surface comes in fine but the break lines do not come in.
View 5 Replies View RelatedWhen I copy or move an object in a file converted from Microstation to Autocad 2012 the system freezes or slows down to a crawl. If I redraw the drawing in Autocad it works fine. I have a lot of drawings converted from Microstation and I don't need to be redrawing them all.
View 1 Replies View RelatedI was trying to recover a temporary file but as i know now, it's impossible. I entered a few commands relating to grips and something else wich i don't remember, and now I'm unable to lock/unlock viewports and when I select objects to copy and then press _CO or copy button or copy with base point, it deselects the objects and asks me to select them again.
View 8 Replies View Relatedunlock his .png file?creator locked it somehow and just the normal double click on the layer produces nothing.
View 1 Replies View RelatedI created a picture by using Photoshop CS, there are several layers I made, I saved it as tif file, but when I open it , there is no layer in the pictures. it shows a locked background. how to unlock the tif files?
What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I am running a script that batch places the name of the document in the image and then saves the document, for all documents in a foder.However, it refuses to place this text, as the target layer is initially locked. So I am looking for a piece of script that I can add to this script which will first unlock all the layers in the document.
View 3 Replies View RelatedI am using Illustrator CS6 and if I click on one of the file menus ("File", "Edit", "View", etc.) if I want to open another menu without closing the previous one I have to click on it, while the default behaviour for other applications is for the menues to follow the mouse cursor, so how do I make it so that if I open the "File" menu and mouse over the "Edit" menu, the "Edit" menu would become open?
View 7 Replies View RelatedI've created a bezier shape by setting pen to shape mode, set no fill, set stroke and stroke color. as descibed by posteer "Conroy" in a different thread.
I succedded in following an existing line (in a psd document) making one wavey line much heavier by using a bezier shape that fit it using the above settings.
Now I want to copy and move that shape over another faint line to make it much more visible in the same way.
In the inlined image the heavy wavy line on viewers right is the bezier shape made as described. I want to copy it and paste it over the other wavy line on the viewers left... you can see how faint it is.... I could think of no better way to make them heavier and more visible.
I'm not finding a handy way to copy paste the heavy shape/line. How can that be done.
Is there a better way to do this from the start... that is, make the faint lines in psd document heavier and more visible.
I have two enhancements that would really make my day in Photoshop Elements Organizer:
The first would be the ability to move and copy items from one catalog to another. This might entail being able to have more than one catalog open at a time. I could then drag and drop or copy an item from one to another. I have several items in a family picture catalog that more appropriately belong in my genealogy catalog. The only way to rectify this now is to delete from the one catalog and then recreate it in the other.The second would be the capability to stream albums directly to my Smart TV. Windows Media Player can currently do this, but I would have to recreate my albums in Windows Media Player, which seems a waste of time if I have already built albums in the Elements catalog. (There apparently is a way to do this currently using iTunes and an Apple TV device, but I would like to be able to do this directly from Elements). The above two enhancements would be really cool!!
I found out that my current autocad architect 2011 move command are same with copy command. And also i found out everytime went i start my autocad programe that is an error message like #@%&*&%#@ that i cant even understand.
View 6 Replies View RelatedI have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedUsing AutoCad 2011. When trying to 'copy/move to end' a 'layout' tab in a drawing, I keep getting the message:
'ERROR:Copy of layout failed'
I have in the past been very successful operating this command in earlier vers of Autocad.
I'm a longtime Photoshop user in the process of switching to Gimp. I've successfully used Gimp for very simple things like brightness/contrast, color adjustment, and sharpening of single-layer images. What I'm trying to do now involves creating a copy of the background and placing it next to the background image, and I can't figure out how to make it work.
Here's what I'm doing:
1. Resize the canvas to twice the width of the original image, leaving the original image at left. This creates a "blank" area to the right which displays as a checkerboard pattern.
2. The area of the original image is already selected (i.e., it already has a frame around it), so I copy and paste it. This creates a floating selection, duly noted in the list of layers.
3. But when I try to move the floating selection to position it to the right of the original image, in the blank area, it appears to disappear behind the checkerboard pattern.
What's the difference between "import", "copy", and "move"?
View 3 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedAutocad 2012 LT locks up when using the copy and move commands. This last for a minute or more then starts working again. The rest of the computer works fine while this is going on. Intel i7 2600 16 GB ram Nvidia G force GTX 460 video card, Windows 7 Home Edition with SP 1 and latest upgades.
View 9 Replies View RelatedMy entire office has been experiencing drawing crashes as a result of moving or copying certain blocks within a dwg. The problem seems to occur only while executing a Move or Copy command on a block with attributes, and zooming or panning while doing so. My heart sinks instantly because the block will disappear when placed, and I know I am doomed to crash.
I am usually able to pan or zoom a few times, and if I act quickly a Save will work before the drawing then crashes. We have recently switched from 2011 to Civil 3D 2013, and the problem still persists. The two culprits are our slope arrow block as well as hex call-out. Both blocks contain attributes and are frequently used through out our drawings, and this problem proves to be most frustrating when pressed for a deadline.
get any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
Is there a way to change the marker size when selecting objects for move, rotate, trim, chamfer..etc commands?
I have tried Autosnap Marker Size, aperture size and cross hair size from the options menu with no luck.
Normally when I hit move or copy there cursor will change to a square and I can click single items for the command. If I enter "c" on the command line and change to the cross cursor I can select multiple objects by clicking and dragging.
In some drawing the cursor will not change to a square and I can not enter "c" on the command line. I can select single objects but the cursor becomes the standard windows arrow.
Is there a setting / variable in the drawing that can affect this?
When I move any object using move command then dimensions are move with objects but dimensions are stretch and show as long extension line in the drawing.
I have checked DIMASSOC it is set to 2.
I have a script that measures the repeat interval and gap between print impressions printed using a print cylinder (for the production team to know which print cylinders to use, and what to expect once it prints, when looking at the proof sheet). Basically it just measures the distance from the beginning of one print impression to the beginning of the next (these are printed with a cylinder, so every time the cylinder rotates a new print impression happens) as well as the distance in between prints. That part works great.
In order to get these meaurements, Illustrator is measuring the distance from a zero point on the artboard to the left side of a marker I made called "repeat", and it is assigned a variable called rawRepeat. What I'd like to do is have the script take that rawRepeat value and use it to move a copy of the print impression to the right by exactly that variable amount and paste it beneath the marker called "repeat". I have been doing this part manually, but haven't been able to figure out how to get illustrator to do this for me.
Here's the script I am using:
var myDocument = app.activeDocument;
var selectedObject = myDocument.selection;
var activeLayer = app.activeDocument.activeLayer;
var layerName = activeLayer.name;
activeLayer.name = "plate";
[Code] .....
For example you take 2 shots of a model, but with slightly different position, it sucks having to redraw a whole new brush on the next photo. Would be great to be able to sync then just drag the brush pin into place. Like how you can with the radial fand ND filter. And it would be awesome to be able to copy the settings of one, and the paste them onto another pin on another area or another photo.Right now its so time consuming having to sync brush adjustments, erase them, then repaint where I want the same settings applied to a different part of another picture.
Second, need to be able to select multiple or all pins, to be able to move them at the same time. Same for for the ND, radial, spot healing pins.
Third, we need to be able to copy brush settings via right clicking the pin, as well as maybe in the brush panel at the top so its something like like:
Mask: New | Edit | Copy | Paste
I could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies View RelatedI use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
many times, when I copy an object with the a dimension to it. It keeps the base point of the dimension and has a crazy long leg of the dimension that starts from the original place. how can I stop this from happening?
View 9 Replies View RelatedWhat I want to do is to combine two commands, editing (copy, move, rotate) and change layer.
View 3 Replies View RelatedI'd like to locate the PROPERTIES button in the Home Panel instead of, or in addition to, the View Panel. When I go into CUI, it won't let me move/copy it.
View 1 Replies View Related
