Is there a way to change the marker size when selecting objects for move, rotate, trim, chamfer..etc commands?
I have tried Autosnap Marker Size, aperture size and cross hair size from the options menu with no luck.
What I want to do is to combine two commands, editing (copy, move, rotate) and change layer.
View 3 Replies View RelatedI found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
Any lisp routine where you can select objects and do a global rotate, scale, etc. from each object's insertion point ?
View 9 Replies View RelatedIn previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedI've got a section marker (the letter designation with arrowheads pointing in the direction of the cut) that I cannot get to behave correctly.
When I set a parameter to one end with a move action, in order to have the arrowhead and attdef for the letter designation move upwards, all is well. When I try to do the same to the other end, the letter desingation attdef will not move.
Neither attdef is set to "Lock Position", so I'm puzzled why one works and the other end does not. I've tried a move action on both ends and a combination of move/stretch, but I can't get it to work.
Autocad Mechincal 2012 on Windows 7 64-bit
It's easy enough to move the map marker for a single image. But I can't find a way to move the marker when multiple images are represented by the marker (thereby changing the location information for all the images). What should I be doing?
View 10 Replies View RelatedI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I created a icon that I want to substitute the default square markers for in a line graph. When I apply the change, the icons are way to small. How do I adjust the size?
View 2 Replies View Relatedthe same file that i'm trying to plot has it's own template that i want to use, but it's attached to a different layer. so when i try to move or rotate the template, it moves the other objects. They all have colors but aren't connected to the same layers of their colors. how do I isolate the layers so i can make it's own layer and manipulate it on it's own?
View 9 Replies View RelatedWhat happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedIs there a way to Copy and Rotate something at the same time? If I click on the rotate icon, I can rotate the object(s) in question but I cannot copy them from where they are. It just moves them on a rotational axis.
View 9 Replies View RelatedHow do you rotate or move just one or two points in civil 3d? The surveyor used Translate Survey Database and moved all the points, but 4 of them were not included. What is the difference between translate and just the autocad command move and rotate?
View 5 Replies View RelatedI thought there was a way to insert an image (tif) to model space, and adjust it like you would any line or polygon. Apparently this is not the case. When I attach an image, where I place it is permanent and I can't even select it.
View 3 Replies View RelatedNoticed that the multiple copy option has been removed from the rotate command? It used to be that I could choose the copy option in the rotate command and set a reference angle to create multiple copies of an object based on a rotational axis. Now the command will let you copy based on a reference angle, but only once. Is there a system variable I can set to bring this option back?
View 1 Replies View RelatedI have a surface. I have a lot of operations done (points adding, breakilines, borders, etc) I want to move and or rotate and change datum.
I have seen old post.
Ok, I have to select the definition data, to transform it and finally rebuild my surface.
I select them and simply move it.
mmm. Something is wrong. Maybe a bug... I have 12 duplicate points (false) , I have missing points, I have a crossed two breaklines.
The data used is very simple, 15 breaklines, 50 points (so there is no reason to think on big data problems...) I have nothing at edit branch.
Drawing started in LDD a few years ago. It was on a local coordinate system of 1000,1000.
The drawing has since been migrated to C3D2012. Now we have data in UTM coordinates that we need to match to the old data. Actually, we want to shift/rotate the entire original set of data to match the new UTM data, so we can continue in UTM for all future data collection.
So, I went through and turned all layers on, Thawed them and unlocked them. I made sure all points were visable, etc. Then I tried to move the original data (I also tried the align command, etc., with the same results) and found a glitch. After I moved the data, I found that there was some points and survey figures as well as a cooridore, that had not moved. The vast majority of the drawing had moved as expected, but the afore mentioned data would not move.
I would like to reuse the existing sketch on the other part. Usually I did it without problems. But now after I have pasted the existing sketch I cannot move or rotate it. While moving or rotating Inventor usually prompts for braking some constraints for this action. But nevertheless it does not allow me to move or rotate. It says something about "constraint settings for sketch edit tools" -- cannot get any hint of that in a whole phrase nor in part [URL] what else Inventor wants so I can reuse my sketches??
View 4 Replies View RelatedI use Acad and Turbocad selectively. I can't find a way to enable Acad to have object handlers to move and rotate objects. Is there a setting that I can enable to turn this feature on in Acad? I like this feature in Turbocad, but like to have in Acad.
View 7 Replies View RelatedAny routine (perhaps a lisp) to move, rotate and align text with one swift command?
Something like this video below.
Created L200 Annotative text in C3d drawing w/ SP1, INSTALLED SP2, working in dwg now I can not move, rotate or erase the text that is annotative (the two scale symbols) appear at every piece of text. I tried making in the STYLE text box toggling on and off "Annotative Text" does not work. Also did -purge Regapps, still can not edit text.
View 7 Replies View RelatedI want the wheels to rotate and turn as the box starts to move sidewise. I tried to suppress the angle but It still did not work.
View 9 Replies View RelatedURL...how to move the origin of a part when you want a common origin for everything. in iv2012 you also get angles about axis, in greyed out boxes.
In a test assembly I can get the offsetting to work, but not the rotations. The part I want to edit origin of is rotated in all three axis.
I have a macro that i have been using in autocad 2012 for a simple copy & rotate command as follows
^C^C_select;auto;\_copy;p;;0,0;0,0;_move;p;;\_rotate;p;;\redraw
For some reason it now does not work in 2013 the macro exits after the copy part of the macro is finished & fails to let you rotate the copied object.
I made one scene in 3dsmax 2013 in 24fps.Is just a move and rotation camera animation.In another software(after effects) I made interpretfootage as 24fps, and the composite 24fps.
The final move apear like droping, jumping frames, a not cool sensation,May be just montion blur, but realy, apear like 3dsmax animation interpolating as 30fps.but in begin i already set the scene to 24fps.
My CorelDRAW has just developed a glitch - I can select objects but not move them (other than by using the nudge button) and if I click twice on the object it doesn't change the nodes to allow me to rotate - weird and seriously difficult to do any work in the programme. I've tried turning the computer off and on again and have tried the default setting.
View 5 Replies View RelatedHow can I move (rotate or otherwise transform) a Selection.
1. Suppose I have a single Layer, on which I draw an image.
2. Now I activate a Selection Tool (Rectangular, Elliptical, Lasso, etc.) and make a Selection.
3. Then I activate the Move Tool and click on the "Move Selection" option, not the "Move Layer" option. [Oddly, when the "Move Selection" option is activated, there are two greyed out (unavailable) sub-options, both indication "Move Selection".]
4. With the Move Tool, I am able to move the Selection, but not the contents of that Selection.
The Gimp Documentation guide says:"If you click-and-drag the selection without handles, you create a new selection! To move the selection contents, you have to hold down Ctrl+Alt keys and click-and-drag the selection. This makes the original place empty. A floating selection is created. The required key commands may differ on your system, look in the status bar to see if another combination is specified; for example, Shift+Ctrl+Alt."
I have tried every combination of Shift, Ctrl and Alt (Shift+Ctrl, Ctrl+Alt and Shift+Alt). None of these allow me to move the contents of the selection. Further, there are no "handles" on the Selection. I suppose the key is to get the handles to appear, but I have not been able to discover the secret combination of keys to make that happen.
I am running Windows XP Pro.
I've run into Paint.NET a few weeks ago. I think it's a very good choice for beginners (and maybe professionals too) at a graphic field. I've made some cool pictures (with some cool plugins inside Paint.NET or published at the forum) and now I wanna to make my own plugin.
The question is how to move and rotate a specific part of image at source canvas. The rest of the image must be untouched. I consider it's impossible to use Layers -> Rotate/Zoom tool directly (correct me if I'm wrong). So I should use a piece of C# code. I think source code of Rotate/Zoom tool would be very useful too but I couldn't find it.
I found out that my current autocad architect 2011 move command are same with copy command. And also i found out everytime went i start my autocad programe that is an error message like #@%&*&%#@ that i cant even understand.
View 6 Replies View RelatedI have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedUsing AutoCad 2011. When trying to 'copy/move to end' a 'layout' tab in a drawing, I keep getting the message:
'ERROR:Copy of layout failed'
I have in the past been very successful operating this command in earlier vers of Autocad.