AutoCAD Inventor :: Wheels To Rotate And Turn As Box Starts To Move Sidewise
Nov 23, 2013I want the wheels to rotate and turn as the box starts to move sidewise. I tried to suppress the angle but It still did not work.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Combine Rotate And Turn On Wheels
Nov 18, 2013I've managed to get my wheels to rotate, but how can I get them to turn in the same direction as the box when it starts to move sidewise? ? I tried to create an angle with the origin of Part 1(Assembly 2:2) and the "golv", but it interfeared with other constraints.
View 4 Replies View Related3ds Max Animation :: Rotate A Set Of Wheels Like Locomotive Train Wheel
Aug 20, 2011I am trying to rotate a set of wheels that are moving like a locomotive train wheel and having problems. I was able to animate the wheels to move like a locomotive wheel by linking and turning off the z axis inherit for the red rod (see attached images. Image ex04.jpg.)
The problem came when it was time to rotate the whole thing. I grouped everything and rotated the wheels around as a group. As the red rod had is z axis inherit turned off once it started to detach from it location(ex06.jpg), which was kind of expected.
I am not sure what to do to solve this problem. Do i create a bone structure with IK handles to resolve this problem or is there something else better to solve this problem?
AutoCAD Inventor :: Cannot Move Or Rotate Copied Sketch
Jun 14, 2011I would like to reuse the existing sketch on the other part. Usually I did it without problems. But now after I have pasted the existing sketch I cannot move or rotate it. While moving or rotating Inventor usually prompts for braking some constraints for this action. But nevertheless it does not allow me to move or rotate. It says something about "constraint settings for sketch edit tools" -- cannot get any hint of that in a whole phrase nor in part [URL] what else Inventor wants so I can reuse my sketches??
View 4 Replies View RelatedAutoCAD Inventor :: Move And Rotate Origin Of Imported Step File To Match Parent
Mar 8, 2013URL...how to move the origin of a part when you want a common origin for everything. in iv2012 you also get angles about axis, in greyed out boxes.
In a test assembly I can get the offsetting to work, but not the rotations. The part I want to edit origin of is rotated in all three axis.
AutoCAD Inventor :: Cable Adaptive To 4 Wheels
Sep 30, 2011I’m working on a project where I need to make a cable that is adaptive to 4 wheels, where 2 of them is moving.
View 5 Replies View RelatedAutoCAD Inventor :: Unable To Set Angle On Wheels
Nov 10, 2013Why is it that I cannot set an angle on the wheels without to interfere with the mate/flush constraints on the box?
I want the wheels to roll as the box moves forward.
AutoCad :: How To Move Or Rotate The Template
Mar 30, 2012the same file that i'm trying to plot has it's own template that i want to use, but it's attached to a different layer. so when i try to move or rotate the template, it moves the other objects. They all have colors but aren't connected to the same layers of their colors. how do I isolate the layers so i can make it's own layer and manipulate it on it's own?
View 9 Replies View RelatedAutoCAD Civil 3D :: Rotate Or Move Just One Or Two Points?
Mar 28, 2013How do you rotate or move just one or two points in civil 3d? The surveyor used Translate Survey Database and moved all the points, but 4 of them were not included. What is the difference between translate and just the autocad command move and rotate?
View 5 Replies View RelatedAutoCad :: How To Move / Rotate And Scale Images
Nov 27, 2012I thought there was a way to insert an image (tif) to model space, and adjust it like you would any line or polygon. Apparently this is not the case. When I attach an image, where I place it is permanent and I can't even select it.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Transform (move / Rotate) A Surface
Mar 25, 2013I have a surface. I have a lot of operations done (points adding, breakilines, borders, etc) I want to move and or rotate and change datum.
I have seen old post.
Ok, I have to select the definition data, to transform it and finally rebuild my surface.
I select them and simply move it.
mmm. Something is wrong. Maybe a bug... I have 12 duplicate points (false) , I have missing points, I have a crossed two breaklines.
The data used is very simple, 15 breaklines, 50 points (so there is no reason to think on big data problems...) I have nothing at edit branch.
AutoCAD Civil 3D :: Move / Rotate Entire Drawing
Feb 15, 2012Drawing started in LDD a few years ago. It was on a local coordinate system of 1000,1000.
The drawing has since been migrated to C3D2012. Now we have data in UTM coordinates that we need to match to the old data. Actually, we want to shift/rotate the entire original set of data to match the new UTM data, so we can continue in UTM for all future data collection.
So, I went through and turned all layers on, Thawed them and unlocked them. I made sure all points were visable, etc. Then I tried to move the original data (I also tried the align command, etc., with the same results) and found a glitch. After I moved the data, I found that there was some points and survey figures as well as a cooridore, that had not moved. The vast majority of the drawing had moved as expected, but the afore mentioned data would not move.
AutoCad :: Object Handlers To Move / Rotate Objects
Oct 12, 2012I use Acad and Turbocad selectively. I can't find a way to enable Acad to have object handlers to move and rotate objects. Is there a setting that I can enable to turn this feature on in Acad? I like this feature in Turbocad, but like to have in Acad.
View 7 Replies View RelatedAutoCad :: Marker Size For Copy / Rotate / Move
Jun 14, 2012Is there a way to change the marker size when selecting objects for move, rotate, trim, chamfer..etc commands?
I have tried Autosnap Marker Size, aperture size and cross hair size from the options menu with no luck.
AutoCad 2D :: Move / Align And Rotate Text To Two Selected Points?
Nov 2, 2012Any routine (perhaps a lisp) to move, rotate and align text with one swift command?
Something like this video below.
AutoCad :: Change Layer While Editing (copy / Move / Rotate)
Aug 13, 2011What I want to do is to combine two commands, editing (copy, move, rotate) and change layer.
View 3 Replies View RelatedAutoCAD Inventor :: Refresh Previous Rule Before Next One Starts?
Jul 9, 2012Is there some syntax that would refresh a previous rule before the next one starts? I have a file where the constraint is not turning on when it is supposed to, but all I have to do is refresh the rule and it works.
[URL]
AutoCAD Civil 3D :: Can't Edit Annotative Text / Move / Rotate Or Erase
Oct 29, 2007Created L200 Annotative text in C3d drawing w/ SP1, INSTALLED SP2, working in dwg now I can not move, rotate or erase the text that is annotative (the two scale symbols) appear at every piece of text. I tried making in the STYLE text box toggling on and off "Annotative Text" does not work. Also did -purge Regapps, still can not edit text.
View 7 Replies View RelatedAutoCAD Inventor :: 2012 Showcase Starts To Load And Then Shuts Down
Oct 7, 20132012 showcase starts to load and then shuts down.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Copy / Move And Rotate Block(s) About Y-axis
Jul 31, 2012I found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
AutoCAD Visual LISP / AutoLISP :: Copy / Move / Scale / Rotate Objects
May 24, 2002Any lisp routine where you can select objects and do a global rotate, scale, etc. from each object's insertion point ?
View 9 Replies View RelatedAutoCAD Inventor :: 2010 Quits Before It Starts Or After Splash Screen Pops Up
Nov 5, 2013When I try to start Inventor is attempts to open and shows up in the active processes list for a few seconds.
Sometimes it will quit before the splash screen appears and sometimes a split second after it appears. No error messages or computer lag, it just simply quits. I'll list the steps I've taken so far. (Windows 7 64 bit)
Deleted the Cascadeinfo.cas file
I've had an error when my 3d connexion mouse trys to start so I uninstalled the drivers.
IT guy could open Inventor from his login on my computer but still not with mine.
Deleted Autodesk folder in the AppData folder and deleted the Cascadeinfo.cas again.
Did a "Repair" of Inventor.
Did a "Re-Install" of Inventor.
Nothing has worked yet and the only advice I'm finding is in regards to deleting the Cascadeinfo.cas file.
My thoughts are that the key to this problem is the fact that it works for other users on this machine. I just don't know what it is or how to fix it.
AutoCAD Inventor :: Opening Neutral Format File Starts New Instance Of IV
Apr 24, 2012Whenever I attempt to open a non-native format file from outside of Inventor it launches a fresh instance of IV. Currently I've been working around it by dragging the file to the status bar of IV, but at least a few times a week I forget and double click it.
Some scouring of the web and these boards yielded some info concerning this problem as it pertains to native formats, but I haven't been able to find anything for neutral formats. I'm sure it requires a registry key tweaking, but I'm not comfortable enough with regedit to go in there and just start changing stuff without some level of guidance. The problem occurs whether the files are opened from windows or an internet browser (tried firefox and ie). I suspect that every format I ever wanted to open would require a separate edit, in that case I'd be perfectly happy with just a fix for .step files. That would at least have me set for 90% of my downloads and offer an improvement to my overall sanity level.
3ds Max :: Just Move And Rotate Camera Animation
May 14, 2013I made one scene in 3dsmax 2013 in 24fps.Is just a move and rotation camera animation.In another software(after effects) I made interpretfootage as 24fps, and the composite 24fps.
The final move apear like droping, jumping frames, a not cool sensation,May be just montion blur, but realy, apear like 3dsmax animation interpolating as 30fps.but in begin i already set the scene to 24fps.
AutoCAD Inventor :: Quickest Way To Create Part That Starts Off As Basic Extruded AISC Shape?
Dec 10, 2013I am new Inventor user (2014 version) trying to get up to speed on best practices and the most efficient work flows. I find myself designing individual parts that start off as base AISC shapes (angles, square tubes, rectangular tubes, etc.). These are parts that start off as base extrusions that then have multiple machining operations performed on them. In most cases, the parts are stand along parts that aren't involved in any type of frame.
In these cases, I generally sketch the profile from scratch using my AISC book and then extrude. I'm sure this is silly. Frame generator already has the profile data built in- so why am I sketching these profiles from scratch? But using frame generator in an assembly environment to make a single member part seems silly to me also. Why should there be an assembly file at all? I just want a single part that starts off as some length of some standard profile. Using frame generator in an assembly environment seems like overkill.
What is the best practice for starting off a part with some length of a standard ANSI, ISO, or other profile?
CorelDRAW X4 :: Can't Move Or Rotate Selected Object
Mar 14, 2012My CorelDRAW has just developed a glitch - I can select objects but not move them (other than by using the nudge button) and if I click twice on the object it doesn't change the nodes to allow me to rotate - weird and seriously difficult to do any work in the programme. I've tried turning the computer off and on again and have tried the default setting.
View 5 Replies View RelatedGIMP :: How To Move And Rotate Or Transform A Selection
Aug 20, 2011How can I move (rotate or otherwise transform) a Selection.
1. Suppose I have a single Layer, on which I draw an image.
2. Now I activate a Selection Tool (Rectangular, Elliptical, Lasso, etc.) and make a Selection.
3. Then I activate the Move Tool and click on the "Move Selection" option, not the "Move Layer" option. [Oddly, when the "Move Selection" option is activated, there are two greyed out (unavailable) sub-options, both indication "Move Selection".]
4. With the Move Tool, I am able to move the Selection, but not the contents of that Selection.
The Gimp Documentation guide says:"If you click-and-drag the selection without handles, you create a new selection! To move the selection contents, you have to hold down Ctrl+Alt keys and click-and-drag the selection. This makes the original place empty. A floating selection is created. The required key commands may differ on your system, look in the status bar to see if another combination is specified; for example, Shift+Ctrl+Alt."
I have tried every combination of Shift, Ctrl and Alt (Shift+Ctrl, Ctrl+Alt and Shift+Alt). None of these allow me to move the contents of the selection. Further, there are no "handles" on the Selection. I suppose the key is to get the handles to appear, but I have not been able to discover the secret combination of keys to make that happen.
I am running Windows XP Pro.
Paint.NET :: How To Move And Rotate Part Of Image
Aug 24, 2011I've run into Paint.NET a few weeks ago. I think it's a very good choice for beginners (and maybe professionals too) at a graphic field. I've made some cool pictures (with some cool plugins inside Paint.NET or published at the forum) and now I wanna to make my own plugin.
The question is how to move and rotate a specific part of image at source canvas. The rest of the image must be untouched. I consider it's impossible to use Layers -> Rotate/Zoom tool directly (correct me if I'm wrong). So I should use a piece of C# code. I think source code of Rotate/Zoom tool would be very useful too but I couldn't find it.
Maya Modeling :: Rotate Edge But Only Move Affected Vertices?
Nov 17, 2012I am trying to model the following simple structure:
I made this example by creating a new polygonal cylinder, rotating the top edges that are to the right of the x-axis and repositioning the affected vertices afterwards, but doing it that way just doesnt feel right, it seems too unclean to me.
I would like the affected vertices to only move on a given axis when rotating the edges, so I dont need to reposition them after the rotate operation. I tried to illustrate what I mean in the following screenshot:
The edges I want to rotate are marked in red, the vertices that are supposed to only move on the y-axis are marked in green. The arrows indicate the desired movement.
Is this way of rotating an edge possible with the rotate tool or something?
Illustrator :: Shortcut To Move / Rotate / Scale A Pattern Inside
Jan 9, 2014I'm working in the fashion industry where we are creating a lot of patterns and textile designs.transform pattern inside a vector shape without having to move the vector object :
To transform patterns but not objects when using a transform tool, hold down the tilde key (~) while dragging. The borders of the object appear to be transformed, but when you release the mouse button, the borders snap back to their original configuration, leaving only the pattern transformed. URL..
It seems this shortcut works only with US and UK keyboard.
I'm using a french keyboard where it doesn't work, probably because there is'nt any key especially dedicated to the Tilde sign (~), and you need to combine multiple keys to get this symbol (Alt GR + the key 2 above the key Z) .
I finally found the shortcut on MAC which is the keyboard key with the britisih pound sterling symbol (£). But not on PC !!!how to get this shortcut on PC with a french keyboard ?
Is there a way to change the shortcut for this very useful option, without having to take care of the kind of keyboard ?
Photoshop :: Move Tool - Turn Off Location Details
Jul 6, 2013The Move tool - is there a way to turn off the location details as the tool moves around?
View 1 Replies View Related
