Is there some syntax that would refresh a previous rule before the next one starts? I have a file where the constraint is not turning on when it is supposed to, but all I have to do is refresh the rule and it works.
[URL]
Is there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I am trying to use iLogic to create the file types I need to give to my vendors once I have created a drawing.In the .idw file I have a rule that creates a .pdf file and .dwg file. I also want it to activate a rule I have in the .ipt file that creates a .dxf file.
trigger = iTrigger0oType=Left(ThisDoc.FileName(False),3)GoExcel.Open("S:DRAWINGSFolder Types.xlsx", "Sheet1")For rowPN = 1 To 200 If (GoExcel .CellValue("A" & rowPN) = oType) Then oFile = GoExcel.CellValue("C" & rowPN) Exit For End IfNextoFolder = "S:DRAWINGSNOT RELEASED" & oFileIf Not System.IO.Directory.Exists(oFolder) ThenSystem.IO.Directory.CreateDirectory(oFolder)End IfThisDoc.Document.SaveAs(oFolder & "" &
[code].....
I have a user in my group that is hesitant to upgrade to 2012 because , he has many lisp routines that are associated with the PREVIOUS selection feature. This selection is very useful in that when you are moving or selecting many objects you can enter P for previous and the object will be selected.
In 2009, when you select objects then hit escape, then try to execute a command requesting to use the Previous, AutoCAD will remember the last selected object and then highlight it.
In 2012, when you select objects then hit escape, then try to execute a command using P for previous, it will not highlight the previous object selected but will highlight the previous object where a command was executed on.
Hope I haven't lost you. It seems there should be a setting under SELECTION of how to manipulate the Previous selection feature.
I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.
Inventor 2014?
is there way to refresh sheet of drawing when an iProperty is changed trough API? When I change for example revision Number, the sheet still show old number. The value is changed, because if I open the iProperty dialog, there is new value and also when iProperty dialog is close then the sheet (title block with this property) is immediately correctly updated. I know that I can use ActiveSheet.Update method, but this update whole sheet and it take long time. There nust be something better because dialog iProperty doesnot update whole sheet and it is vvery quick.
Dim oISI As Inventor.PropertySetDim oDrw As Inventor.DrawingDocumentSet oDrw = ThisApplication.ActiveDocumentSet oISI = oDrw.PropertySets.Item("Inventor Summary Information")oISI.Item("Revision Number").Value = "test"oDrw.ActiveSheet.Update ' I would like to replace this line, this take long time
[URL]
2012 showcase starts to load and then shuts down.
View 3 Replies View RelatedAnyway, I just updated to the Factory Design Suite Advanced package for 2011 which, of course, includes Inventor. I have downloaded and installed all updates, service packs and hotfixes I could find btw. What happens is I'll be working in Inventor on a solid model of ANY size (even a single part) and with absolutely no warning, the display window will freeze up and won't refresh. What's really weird though is that Inventor itself is not locked up. I can click on any of the buttons or any of the items shown in the browser as though the program's running normally. I can check the task manager and it shows Inventor to be running normally. The memory status bar in Inventor shows lots of available memory. I can even hover over the display window in the area where the view steering wheel is located and the icon will change appearance as though it's working normally. I can even save the file. If I close the file, it responds like normal and goes back to the default screen. If I try to open ANY file after that, however, the screen will not refresh or show me the file I opened, even though everything else works fine and the program isn't frozen. The only way to restore full function is to completely close and reopen Inventor (on average I have to do this about once an hour). Btw, I'm also working in a local directory stored on my hard drive, not a network.
My first inkling is that it's a graphics issue but I have played with all the display settings to no avail. I ran a diagnostic on the video card and Inventor says that I'm running an Autodesk Certified driver. All the specs are within reason I think.
My workstation specs:
Dell Precision M4500 laptop
Intel core i7 processor, 2.67 GHz
4 GB RAM
Windows XP Professional SP3, 32-bit, running in 3 GB mode
NVIDIA Quadro FX 1800M, 1 GB graphics card (just updated the driver too...no change)
230 GB hard drive, 136 GB free space
I'm currently using Inventor Professional 2012, and have been experiencing problems with virtual memory usage. In past versions of Inventor, the small bar graph counter at the bottom right-hand corner of the screen (Virtual memory counter? Not sure what to call it...) would "re-fresh" after closing a model, drawing, etc. (i.e. Once closing the file, the counter would change from yellow to green, bringing the virtual memory usage back to zero). However, this isn't happening with 2012, and I'm not sure if the problem is the way Inventor was installed onto my workstation, or if it's a problem with the hardware. A temporary solution has been to shut down Inventor when the bar graph gets too far into the yellow range (or red), and then starting up Inventor again.
Specs for my workstation are as follows: Windows 7 (32-bit), processor is Intel(R) Xeon(R) CPU W3503 @ 2.4GHz 2.39GHz, 3GB RAM.
I have some assemblies with standard components inserted from Content Center which I have published.
After some changes I do on some of them within CC, I can't refresh those that are already placed in assemblies. The window that displays the components out-of-date won't appear. Only the message precedes the appearance of this windows is shown and that's it, nothing happens.
For new Assembly I don't have this problem.
failure to refresh Model Tree after switching configurations - app restart required
We have a user who is getting this message several times per day and must restart his PC. He is the only user of the Inventor Vault product using 2013. We have redone his laptop and and given him a clean laptop with a fresh install of AutoCAD.
I'm creating a VB.exe (Visual Basic 2010 Express) tool that displays iProperties for Inventor using a running session of Inventor. How do I automatically refresh the display on the form when you switch the active inventor document tab within Inventor?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I´m working on an addin that needs the vaultAddin ( Inventor Vault / InventorVault.dll ) to update it´s vaultinfo via API.
Since the vaultaddins browserpane.control is an activeX control I can´t access it, and the addin has not implemented a hook to the browserpane.refresh() or browserpane.update() ( causes a crash )
So how do I refresh the vaultAddins information on "what´s actually going on in the vault" through API ?
It seems like I "just" need a reference to the same eventhandler the "refresh vault status" button is calling, but that might be wishfull thinking..?
( C#, VS2012 )
[URL]
When I try to start Inventor is attempts to open and shows up in the active processes list for a few seconds.
Sometimes it will quit before the splash screen appears and sometimes a split second after it appears. No error messages or computer lag, it just simply quits. I'll list the steps I've taken so far. (Windows 7 64 bit)
Deleted the Cascadeinfo.cas file
I've had an error when my 3d connexion mouse trys to start so I uninstalled the drivers.
IT guy could open Inventor from his login on my computer but still not with mine.
Deleted Autodesk folder in the AppData folder and deleted the Cascadeinfo.cas again.
Did a "Repair" of Inventor.
Did a "Re-Install" of Inventor.
Nothing has worked yet and the only advice I'm finding is in regards to deleting the Cascadeinfo.cas file.
My thoughts are that the key to this problem is the fact that it works for other users on this machine. I just don't know what it is or how to fix it.
Whenever I attempt to open a non-native format file from outside of Inventor it launches a fresh instance of IV. Currently I've been working around it by dragging the file to the status bar of IV, but at least a few times a week I forget and double click it.
Some scouring of the web and these boards yielded some info concerning this problem as it pertains to native formats, but I haven't been able to find anything for neutral formats. I'm sure it requires a registry key tweaking, but I'm not comfortable enough with regedit to go in there and just start changing stuff without some level of guidance. The problem occurs whether the files are opened from windows or an internet browser (tried firefox and ie). I suspect that every format I ever wanted to open would require a separate edit, in that case I'd be perfectly happy with just a fix for .step files. That would at least have me set for 90% of my downloads and offer an improvement to my overall sanity level.
I want the wheels to rotate and turn as the box starts to move sidewise. I tried to suppress the angle but It still did not work.
View 9 Replies View Relateddifference between the "Refresh File" and "Revert to Latest" commands in the Vault browser within Inventor 2013? We just started using the Vault Collaboration 2013 flavor of Vault.
View 4 Replies View RelatedI have a general table in my engineered print. It consists of basic columns with text. How can i have Inventor refresh the data if i change the Excel without having to delete and re insert a table ?
Autodesk Inventor Professional 2011
For Creating my own templates i want to use iLogic and embedded Excel-Spreadsheets. The embedded Sheet has its own data, but i want to create a rule to refresh the data from an external Excelsheet.
For now i use the following rule:
For I = 65 To 90 '65=A 90=ZBuchstabe = Chr(I) GoExcel.CellValues("3rd Party:Embedding 1", "Platte", Buchstabe & "1", Buchstabe & "999") = GoExcel.CellValues("G:KonstruktionVorlagenMaterialgrunddaten.xlsx", "Platte", Buchstabe & "1", Buchstabe & "A999")Next I
it works well, but wont insert a new single-sheet or refresh formats, i have to add the same code for each sheet. And its REALLY slow.
Is there a possibility to refresh or replace the whole embedded file via a simple iLogic-rule?
in versions of inventor prior to 2013 we were able to quickly and easily refresh a part styles, and thereby obtain the master information for materials, colours and any other style.
i find that now, with the new system of managing materials and appearances that if i need to update a part to reflect the material assests that reside in my materials and appearance library that i have to:
1. open the part, then set the part material to a material other than that i wish to update, then
2. delete the local/ document asset of the material i wish to update, then,
3. assign the material from my material library to the part (to get the library assets to come through to the part).
it seems ridiculous that we have to delete local materials or colours prior to obtaining an updated material or appearance to get the new data into the part.
(the refresh styles command actually appears to be calling in the updates however the updates seem to treat the document assets as the most important. even when managing materials and appearances, the local/document asset seems to take priority over any library asset. again this is different to pre 2013, and is frustratingly slow to work around. all that used to happen in 2012 and prior is we would get a warning that the local style would be overwritten with updated style data = very quick and easy
I have created custom pipe fitting categories in my server based content center. I copied the standard familes over to a custom library and modified them. After updating the family tables, and hitting refresh in an assembly, the updates fail.
This is the error I get:
Failed: Standard is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.
These parts were placed via "Place from content center" as I do not have the tube & pipe addin (2011 suite, not pro)
How do I get these compnonents to update / refresh??
I am new Inventor user (2014 version) trying to get up to speed on best practices and the most efficient work flows. I find myself designing individual parts that start off as base AISC shapes (angles, square tubes, rectangular tubes, etc.). These are parts that start off as base extrusions that then have multiple machining operations performed on them. In most cases, the parts are stand along parts that aren't involved in any type of frame.
In these cases, I generally sketch the profile from scratch using my AISC book and then extrude. I'm sure this is silly. Frame generator already has the profile data built in- so why am I sketching these profiles from scratch? But using frame generator in an assembly environment to make a single member part seems silly to me also. Why should there be an assembly file at all? I just want a single part that starts off as some length of some standard profile. Using frame generator in an assembly environment seems like overkill.
What is the best practice for starting off a part with some length of a standard ANSI, ISO, or other profile?
I cannot save my previous files created on a student version to an upgraded 2014 version. I tried changing the save as path in the options menu, but no luck. I am able to open the file in the upgraded version but it states that it will open as a student version. Also I cannot copy and paste anything from the student version to the upgraded one. Not sure why.
View 4 Replies View RelatedOur Engineering department just switched over to Product Design Suite 2014 and Vault Professional 2014. The entire vault database was migrated during the upgrade process, which is fine but It now causes me an annoying issue. Every file that was migrated and has not yet been opened with the new software has this prompt that alerts me that the data format has been changed. Is there anyway I can turn off this prompt? I know the files have been migrated I really do not need to be reminded everytime I open a file its very irritating and is not a necessary step in my opinion.
Work Station : Dell Precision R5400
OS: Windows 7 Business 64 Version 6.1.7601 Service Pack 1 Build 7601
Processor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 1995 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A10, 4/30/2012
Graphics Display Card: ATI FirePro V4800 (FireGL V) 1.00 GB Adapter RAM
Computer Memory: 8 GB ECC RAM
I want to create a rule that will warn the user when the plate thickness they are using is not standard. I have already created a multivalue parameter for plate thickness, which lists all standard steel plate thickness's and also allows for custom values.
I was hoping I could create a rule that would prompt a dialogue box warning when the user creates a custom value for plate thickness.
I know this can be done, but like I said, Im bloody useless with iLogic and find it hard to come across relevent examples and/or tutorials online.
I have an ilogic external rule which contains functions that I use from rules in my local assembly document. I'm trying to access the value of a parameter in the document from the external rule's function. Attached is a simple version of what I'm trying to do. If I manually run the external rule, it seems to work just fine, but when I call on the function from a seperate rule, its unable to get the parameter value. I get an error stating, "'Parameter' is not declared. It may be inaccessible due to its protection level."
'this is the external rule. if I run this manually, it works
Public Class test_functionsSub Mainmyresult = ""thisisatest(myresult)MsgBox(myresult)End SubFunction thisisatest(ByRef resultcreated As String)resultcreated = "it worked - " & Parameter("ParameterInDocument")End FunctionEnd Class
'this is my rule in the assembly document trying to use the external rule's function
AddVbFile "z_testrule.iLogicVb"Dim external_rule As New test_functionsmyresult = ""external_rule.thisisatest(myresult)MsgBox(myresult)
I'm currently using this rule for easy PDF making
SaveLoc = "C:Temp"FileName = ThisDoc.FileName(False)Revnr = " rev_" & iProperties.Value("Project", "Revision Number")PDFnaam = SaveLoc & FileName & RevnrThisDoc.Document.SaveAs(PDFnaam & (".pdf") , True)MessageBox.Show("PDF is aangemaakt in C:Temp", "Document creation",MessageBoxButtons.OK,MessageBoxIcon.Information)
The problem with this is that i want to save without lineweight? is there anyway to do this with this code?
I have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies View Related