difference between the "Refresh File" and "Revert to Latest" commands in the Vault browser within Inventor 2013? We just started using the Vault Collaboration 2013 flavor of Vault.
View 4 RepliesI have a general table in my engineered print. It consists of basic columns with text. How can i have Inventor refresh the data if i change the Excel without having to delete and re insert a table ?
Autodesk Inventor Professional 2011
Something I'd like to see fixed (or find out how) is when using the start New File icon, if you select the icon itself, you are directed to the templates folder of the active project, but if you select the "Pull Down" arror next to the icon, you are taken to the Inventor Standard default templates which are typically not used.
I see numerous users unknowingly selecting those default templates and not noticing until they've started entering dims, etc. They get very upset at having to make sure they select the icon and question as to why it would be different.
Same deal if one is to select the Inventor Icon in the far left upper corner (this is more common than the users selecting the pull down) and then select "New", again, they are shuttled to the default templates and not the associated project file templates...why?
[URL]
Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedHow to save an assembly as a new file, in a new location, and not have it update when the individual parts are modified? I need to be able to track the revision history of an assembly, and be able to revert to an assembly, as it was, at any time. I tried pack and go, but the sub-assemblies remained parametric, and reflected the current state. I would like to have file a1.iam, file a2.iam and file a3.iam, all using the same part or sub assy files, and not have them change when I create file a4.iam.
View 5 Replies View Relatedwhat is the best workflow to ensure that i am printing the most latest idw without opening the idw one by one?
View 4 Replies View Relatedissue, more than 1 user needing to work on the same file. Of course this can create problems, like time mangement or users creating their own copies of files which leads to confusion about revisions etc.
I've looked into the possibility of using 'shared' files which updates edits made from multiple users but so far a solution has proved elusive. The only thing I found is called CadVault, but I don't think this does what I would like.
I got the idea from using shared Excel documents and it seems to work well, and IMO, CAD is the typical kind of application that requires this kind of manipulation, but I've never worked for a company that uses such a method. I'm baffled by the lack of information / support for this, unless I'm overlooking something.
I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.
Inventor 2014?
is there way to refresh sheet of drawing when an iProperty is changed trough API? When I change for example revision Number, the sheet still show old number. The value is changed, because if I open the iProperty dialog, there is new value and also when iProperty dialog is close then the sheet (title block with this property) is immediately correctly updated. I know that I can use ActiveSheet.Update method, but this update whole sheet and it take long time. There nust be something better because dialog iProperty doesnot update whole sheet and it is vvery quick.
Dim oISI As Inventor.PropertySetDim oDrw As Inventor.DrawingDocumentSet oDrw = ThisApplication.ActiveDocumentSet oISI = oDrw.PropertySets.Item("Inventor Summary Information")oISI.Item("Revision Number").Value = "test"oDrw.ActiveSheet.Update ' I would like to replace this line, this take long time
[URL]
Anyway, I just updated to the Factory Design Suite Advanced package for 2011 which, of course, includes Inventor. I have downloaded and installed all updates, service packs and hotfixes I could find btw. What happens is I'll be working in Inventor on a solid model of ANY size (even a single part) and with absolutely no warning, the display window will freeze up and won't refresh. What's really weird though is that Inventor itself is not locked up. I can click on any of the buttons or any of the items shown in the browser as though the program's running normally. I can check the task manager and it shows Inventor to be running normally. The memory status bar in Inventor shows lots of available memory. I can even hover over the display window in the area where the view steering wheel is located and the icon will change appearance as though it's working normally. I can even save the file. If I close the file, it responds like normal and goes back to the default screen. If I try to open ANY file after that, however, the screen will not refresh or show me the file I opened, even though everything else works fine and the program isn't frozen. The only way to restore full function is to completely close and reopen Inventor (on average I have to do this about once an hour). Btw, I'm also working in a local directory stored on my hard drive, not a network.
My first inkling is that it's a graphics issue but I have played with all the display settings to no avail. I ran a diagnostic on the video card and Inventor says that I'm running an Autodesk Certified driver. All the specs are within reason I think.
My workstation specs:
Dell Precision M4500 laptop
Intel core i7 processor, 2.67 GHz
4 GB RAM
Windows XP Professional SP3, 32-bit, running in 3 GB mode
NVIDIA Quadro FX 1800M, 1 GB graphics card (just updated the driver too...no change)
230 GB hard drive, 136 GB free space
I'm currently using Inventor Professional 2012, and have been experiencing problems with virtual memory usage. In past versions of Inventor, the small bar graph counter at the bottom right-hand corner of the screen (Virtual memory counter? Not sure what to call it...) would "re-fresh" after closing a model, drawing, etc. (i.e. Once closing the file, the counter would change from yellow to green, bringing the virtual memory usage back to zero). However, this isn't happening with 2012, and I'm not sure if the problem is the way Inventor was installed onto my workstation, or if it's a problem with the hardware. A temporary solution has been to shut down Inventor when the bar graph gets too far into the yellow range (or red), and then starting up Inventor again.
Specs for my workstation are as follows: Windows 7 (32-bit), processor is Intel(R) Xeon(R) CPU W3503 @ 2.4GHz 2.39GHz, 3GB RAM.
I have some assemblies with standard components inserted from Content Center which I have published.
After some changes I do on some of them within CC, I can't refresh those that are already placed in assemblies. The window that displays the components out-of-date won't appear. Only the message precedes the appearance of this windows is shown and that's it, nothing happens.
For new Assembly I don't have this problem.
failure to refresh Model Tree after switching configurations - app restart required
We have a user who is getting this message several times per day and must restart his PC. He is the only user of the Inventor Vault product using 2013. We have redone his laptop and and given him a clean laptop with a fresh install of AutoCAD.
I'm creating a VB.exe (Visual Basic 2010 Express) tool that displays iProperties for Inventor using a running session of Inventor. How do I automatically refresh the display on the form when you switch the active inventor document tab within Inventor?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
Is there some syntax that would refresh a previous rule before the next one starts? I have a file where the constraint is not turning on when it is supposed to, but all I have to do is refresh the rule and it works.
[URL]
I´m working on an addin that needs the vaultAddin ( Inventor Vault / InventorVault.dll ) to update it´s vaultinfo via API.
Since the vaultaddins browserpane.control is an activeX control I can´t access it, and the addin has not implemented a hook to the browserpane.refresh() or browserpane.update() ( causes a crash )
So how do I refresh the vaultAddins information on "what´s actually going on in the vault" through API ?
It seems like I "just" need a reference to the same eventhandler the "refresh vault status" button is calling, but that might be wishfull thinking..?
( C#, VS2012 )
[URL]
Photoshop CC: PSD File Associations revert to CS6 in Finder>Get Info - Mac. File associations in Bridge manually updated and are working, but Finder still reverts to CS6 when changed in the Get Info window of a .psd file.
View 7 Replies View RelatedI am using a Mac retina display with OSX version 10.8.5. It has an internal flash/solid state drive. I am a member of Adobe CC. Since I installed the latest Photoshop update (14.1.2, x64), my Photoshop crashes when I try to save (command+S) a .psd file.
View 2 Replies View RelatedIs there a quick way to revert an edited BOM back to the original quantities before they were edited?
View 2 Replies View RelatedI have an idw that contains a parts list in which some of the information has been edited. The edited text is shown in blue. I would like to revert these fields to the values that exist in the BOM and in iproperties. How do I do this?
View 4 Replies View RelatedIs there a way to revert an open, edited part back to its most current save? Or to close an edited part without its changes persisting in assemblies that reference it?
I often work on parts with their associated assemblies open; Inventor won't let me discard changes until all related assemblies are closed. Searching brought me to a thread describing the same issue from 2006. I'm using Inventor 2010.
If I override the text in a parts list, say to rename a part number.How can I make Inventor revert back to the original listed part number?I've tried deleting and inserting the parts list, but it still has the overridden Text.
View 1 Replies View Related i have a sony nex 6 camera. i would like to know if the latest photoshop of lightroom supports this camera and its RAW file - ARW?
If not, what do you recommend i do? i want to avoid having to compress the images, if that would reduce quality.
There appears to be a bug in CS6 - does this work in any version of Photoshop?
Problem - data sets are not refreshed when contents of the data file are changed, despite clicking "Apply Data Set".
The latest updates are installed, running on Windows 7 Professional, 64-bit, plenty of RAM and available storage. This has never worked before and appears to be a bug in the software. I’ve gone so far as to close PS and even rebooted between steps 4 and 5, same problem. Here's how to recreate it:
1. Create a psd, define variables (I've tried both text and graphic layers)
2. Assign csv file as "Data Set", save the psd
3. Run export, close psd
4. Chage data in csv that was defined as Data Set, save and close csv file
5. Re-open same psd
6. Click "Apply Data Set" - nothing happens
Data is NOT refreshed regardless of whether Data Set 1 or “All data sets” is selected. The only thing that seems to work is to open the PSD and redefine the exact same file as the data set again, then batch export. Because I'd be dealing with volumes of psd files that use volumes of Data Set files that change daily, this isn't feasible.
Defining (or redefining the same file) cannot be recorded in batch mode, nor through the listener (tried previous version just to see).
For Creating my own templates i want to use iLogic and embedded Excel-Spreadsheets. The embedded Sheet has its own data, but i want to create a rule to refresh the data from an external Excelsheet.
For now i use the following rule:
For I = 65 To 90 '65=A 90=ZBuchstabe = Chr(I) GoExcel.CellValues("3rd Party:Embedding 1", "Platte", Buchstabe & "1", Buchstabe & "999") = GoExcel.CellValues("G:KonstruktionVorlagenMaterialgrunddaten.xlsx", "Platte", Buchstabe & "1", Buchstabe & "A999")Next I
it works well, but wont insert a new single-sheet or refresh formats, i have to add the same code for each sheet. And its REALLY slow.
Is there a possibility to refresh or replace the whole embedded file via a simple iLogic-rule?
in versions of inventor prior to 2013 we were able to quickly and easily refresh a part styles, and thereby obtain the master information for materials, colours and any other style.
i find that now, with the new system of managing materials and appearances that if i need to update a part to reflect the material assests that reside in my materials and appearance library that i have to:
1. open the part, then set the part material to a material other than that i wish to update, then
2. delete the local/ document asset of the material i wish to update, then,
3. assign the material from my material library to the part (to get the library assets to come through to the part).
it seems ridiculous that we have to delete local materials or colours prior to obtaining an updated material or appearance to get the new data into the part.
(the refresh styles command actually appears to be calling in the updates however the updates seem to treat the document assets as the most important. even when managing materials and appearances, the local/document asset seems to take priority over any library asset. again this is different to pre 2013, and is frustratingly slow to work around. all that used to happen in 2012 and prior is we would get a warning that the local style would be overwritten with updated style data = very quick and easy
I have created custom pipe fitting categories in my server based content center. I copied the standard familes over to a custom library and modified them. After updating the family tables, and hitting refresh in an assembly, the updates fail.
This is the error I get:
Failed: Standard is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.
These parts were placed via "Place from content center" as I do not have the tube & pipe addin (2011 suite, not pro)
How do I get these compnonents to update / refresh??
I'm running Elements 11 on Windows 7. My photo album was initially in Picasa but we imported all the photos (e.g. 13,000+) into Lightroom 4 and Elements 11.
Lightroom correctly imported all the files (including all images in the .picassa orignals sub-folder), while Elements only imported a subset of the files.
Elements didn't import any images in the .picassa original folder, and also omitted many folders as well as the contents of some folders.
Is there a file watcher 'refresh' that will reimport all the images? I suppose I could delete the 'watched' folder from the file watcher and then re-initiate the add.However, since I don't know why files and folder were missed in the first place, I'd like to understand my options.
I have been working on a project and illustrator and accidentally reverted the file. Is there any possible way to recover the previous file or undo the revert command?
View 1 Replies View RelatedI'm writing a program (C#) that automates the notch tool within the frame generator add-in in Inventor. I can select one part and then select multiple other parts that will notch to the first selected part automatically. This will save me a TON of time if I get it working correctly. With that being said, I have it to the the point where the user selects the first part and then window multiple parts (these are stored and then cycled through later), then I use SendKeys to open the "Notch Tool", and now this is where I encounter my problem.
The Notch Tool is waiting for the user to Pick/Select one part. In my code I've tried to use the CommandManager.DoSelect method which does not register with the tool (I'll exit out of the tool and the part will be selected). My thinking is that this notch tool will only accept the CommandManager.Pick method which would defeat the purpose of the program as I do not want the user to have to go through the parts one by one notching them together.
Is there a way to simulate a mouse click on a selected occurrence within Inventor? Is there another approach I should be considering? And finally, how to rewrite the actual notch tool to allow multiple notches to be done at once?! I'll post a snippet of my code.
docName = instance.ActiveDocument.DisplayName;
int iHandle = NativeWin32.FindWindow(null, "Autodesk Inventor 2012 - [" + docName + "]");
this.Hide();
NativeWin32.SetForegroundWindow(iHandle);
keybd_event(0x23, 0x4F, 0, 0); // Press End
keybd_event(0x23, 0xCF, 0, 0); // Release End (Brings up notch tool)
Thread.Sleep(3000);
//keybd_event(0x28, 0x0F, 0, 0); // Press Tab
//keybd_event(0x09, 0x8F, 0, 0); // Release Tab
NativeWin32.SetForegroundWindow(iHandle);
Thread.Sleep(500);
instance.CommandManager.DoSelect(vert);
What is the difference between:
1) create a sketch
2) create an extrusion
3) make the sketch VISIBLE
4) create another extrusion
and:
1) create a sketch
2) create an extrusion
3) make the sketch SHARED
4) create another extrusion