AutoCAD Inventor :: Cable Adaptive To 4 Wheels
Sep 30, 2011I’m working on a project where I need to make a cable that is adaptive to 4 wheels, where 2 of them is moving.
View 5 Replies
ADVERTISEMENT
AutoCAD Inventor :: Translate Cable Along With Rotating Cable Constraint
Feb 28, 2012I am working on a assembly where a cable wrapped around a drum is animated to rotate with the drum, and there is a longer cable coming off of the rotating cable wrap, this longer piece goes down to another cable on a roller assembly. I have edited the assembly to work without the actual cable drum and without the roller assembly ( I wasnt allowed to share those models ) There are now two cylinders in place of the cable drum, a Grounded center to hold everything in place, a Rotating center which is animated so the wrap can rotate.
My problem is when the part named "Drum to Roller" is a lofted cable with angled ends to meet the "Drum wire wrap" at one end and it meets the "Radius cable ends" at the other end. I need the "Drum to roller" to stay constrained to the "radius cable ends" as well as the "drum wire wrap" ... and after being constrained still animate.
I have set up the animation and you will see that the "Drum wire wrap" is animated to keep the end vertical , the animation is set up to look like the "drum wire wrap' is un-raveling cable and the "drum to roller" is to be what un ravels.
I need to find a way so that the "drum to roller" translates down and over , staying constrained to the "drum wire wrap".. You will see that so far it does not.
I have attached two links below they include the two halfs of my assembly, place all the files in the same folder so you wont have to search for them manually.
[URL]......
[URL].......
AutoCAD Inventor :: Unable To Set Angle On Wheels
Nov 10, 2013Why is it that I cannot set an angle on the wheels without to interfere with the mate/flush constraints on the box?
I want the wheels to roll as the box moves forward.
AutoCAD Inventor :: How To Combine Rotate And Turn On Wheels
Nov 18, 2013I've managed to get my wheels to rotate, but how can I get them to turn in the same direction as the box when it starts to move sidewise? ? I tried to create an angle with the origin of Part 1(Assembly 2:2) and the "golv", but it interfeared with other constraints.
View 4 Replies View RelatedAutoCAD Inventor :: Wheels To Rotate And Turn As Box Starts To Move Sidewise
Nov 23, 2013I want the wheels to rotate and turn as the box starts to move sidewise. I tried to suppress the angle but It still did not work.
View 9 Replies View RelatedAutoCAD Inventor :: Adaptive Part Won't Adapt
May 28, 2013I've been working with adaptive parts for a while now so I think I have a pretty good handle on how they work, but I've tried every trick I know and can't get this adaptive part to adapt correctly. When I apply the final constraint, which should drive its length, Inventor tells me it's an inconsistent constraint. If the part would adapt, it should be perfectly consistent. I've attached my work-set, the constraint I'm trying to apply is "Flush:17" under "Side Guard Plate" (the last component in the browser tree).
View 9 Replies View RelatedAutoCAD Inventor :: Adaptive Sketch Reference
May 22, 2012co-workers part file. in the assembly tree the part file has
Cut-->Sketch52-->Reference38.
Now from what I understand if I adjust something in the the assembly file that this Reference38 is associated to then the cut will be adjusted accordingly. My question is, is there a way to determine what Reference 38 is referring to exactly? Which assembly file and which component/part?
AutoCAD Inventor :: Can't Make Subassembly Adaptive
Feb 11, 2013I have an assembly that i want to insert in another assembly. When i do insert it i try to make it "Adaptive" but the option is graded out/not available. How can i make it Adaptive?
View 2 Replies View RelatedAutoCAD Inventor :: Make Assembly Adaptive As Possible
Sep 7, 2012what kind of work flow I can use to make an assembly adaptive as possible..I need to make a machine fixture that requires cut outs for three parts. The fixture is made from a 8" x 5" x 0.19" thk piece of UHMW. I've made the "blank" and it features the work planes I need to place the three parts that the cut outs are derived from.
At first I just started the assembly and placed the parts where they should be and then used sketched outlines to define the cuts. However, since the parts are there they get "cut" as well.
I was wondering if I could make adaptive sketches linked to these parts and then import THEM into the correct plane. I could then use them to define the cuts.
AutoCAD Inventor :: Cannot Make Part Adaptive
Sep 10, 2012I have an assembly with several analogical parts and they have sketches with project geometry inside this assembly ("Adaptive" function works good, look pic "Works").
Unfotrunately, one part of parts doesnt work perfectly ("Adaptive" function is not active, look pic "Doesnt work"),
AutoCAD Inventor :: How To Clear Adaptive Flag
Aug 1, 2012I had a part which was adaptive in the context of an assembly. I managed to remove it from this assembly in such a way that Inventor did not clear it's adaptive flag (when I remove a part from an assembly, Inventor typically asks whether it should clear this flag - this time it didn't, I can not remember exactly what I did). Anyway, now I can not make this part adaptive anymore in another assembly. How can one clear this flag?
View 3 Replies View RelatedAutoCAD Inventor :: Adaptive Part Using IMates
May 27, 2010Is there a way to make a part being placed into an assembly instantly adapt using imates?
For instance:New assembly... Place box 1...Place box 2, but have it automatically placed inside of box 1 and sized to fit inside with 1" clearance all around.
AutoCAD Inventor :: Adaptive Sweeped Part
Aug 16, 2012I'm trying to make an adaptive part using a sweep. I'd like to be able to constrain both ends to other parts in an assembly and have it change as needed. I'm having trouble making the part adaptive though.
If I make a simple extruded cylinder, I can right click on the feature and make it adaptive. Then in an assembly it will change it's length when I constrain the two ends to fixed objects.
If I make a sweeped cylinder along a simple zig zag composed of three lines, I don't get the adaptive option in the right click for the feature. If I make the two sketches the sweep is comprised of adaptive the sweep feature has the adaptive icon next to it, but it won't change. I made both parts adaptive inside of the assembly also.
Is there some trick to making a sweeped part adpative?
AutoCAD Inventor :: Adaptive Structural Bracing
Jul 18, 2013I've been working with inventor professionally for about a year now doing piping and vessels for the oil field. This also involves a lot of pipe supports and platforms.
I'm trying to streamline the process right now by coming up with a way to make some adaptive bracing that I can reuse so I don't have to model it over and over. Most of the engineer drawings I get are basically the same; 2d lines for beams with work points for the bracing and typical connection details.
I start with a skeletal model and use frame gen to drop my beams in. But bracing is where I run into difficulty. I get it done but its just tedious and time consuming
Is their a way I can make a reusable adaptive or flexible bracing for this task? Here's some pics of what I've been sinking around with to try and automate this (I haven't found a good solution yet).
1. Created my skeleton
2. Dropped beams in
3. Created bracing template
4. Dropped bracing temp in assembly
5. Constrained it into place
6. used make parts to place the gusset plates into my assembly
7. gusset plates fully parametric
I'd like to have a better process of doing this. Ideally I'd like to drop a whole brace sub-assembly (gussets, brace and bolts) in to the main assembly and constrain to the drawing specified work points and be done with it.
AutoCAD Inventor :: How To Build Adaptive Assembly
Oct 20, 2011I built an assembly made of some sheet metal parts.
Now - I wanted it to be easily changeable, meaning: in order that each part will adjust according to the other, for instance, it's length, height etc. , and will move with it and adjust, I first made work points on the mating part edges, and then in the relevant part's sketch ( I made the work point inside of the part, not the assembly!) I projected the point.
I was sure that because I see the work point with the "adaptive" symbol , the workp point will move with the parts if I change the dimensions.
It didn't work: For some reason when I'm changing dimensions, the work point stay where it was, even though it's with the "Adaptive" symbol, which makes me wonder what does it really mean (the symbol) if it point won't move along with the part while it changes.
What is the best way for me to do it? Did I have to project the points/edges in the sketch without doing a "work point' before?
My experience with the inventor lately shows that this method isn't working either. I'm sure there a "right" way to do it!
This is very important and elementary thing to do - to adjust part (with their sketches) according to the other.
Inventor 2012 Pro.
I7 workstation
AutoCAD Inventor :: How To Make Adaptive Airbag
Aug 27, 2012how to make an adaptive airbag (part or assy??).
I've never been able to make adaptivity work correctly in kinematic applications, except with cables, but they break all the time and the model does strange things.
Right now, I need to make an airbag adaptive, so when the control arm/axle goes up and down, the airbag gets longer or shorter:
1. top plate constrained to frame rail
2. bottom plate swings off-plane (in 3d space at strange angle)
3. rubber airbag attaches to both plates
I tried to make a part, but that didn't work.
I tried to make an adaptive assembly, but that didn't work.i just can't get this to work.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
AutoCAD Inventor :: Cannot Make Part Adaptive
Nov 18, 20121) How Can I turn on 'Adaptive' option on the menu shown in attached picture for layout part? (in assembly invironment)
2) Which process or fault leads to that problem?
AutoCAD Inventor :: Adaptive Icon In Model Tree?
Oct 24, 2011what the little symbol that looks like the recycle symbol is in the model tree is? I have several parts in this assembly and many of them seem to have this symbol that says adaptive next to them and I can't find and rhyme or reason to it. I am attaching a screen shot of it. I use Inventor 2012.
View 1 Replies View RelatedAutoCAD Inventor :: Reuse An Adaptive Part In Assembly
May 26, 2013I am making a truss assembly by connecting a series of nodes with 100 adaptive rods. The node positions are somewhat random, so each rod will be a unique length.
It could be done with 100 adaptive rods. Something like one adaptive part that can be used 100 times in one assembly?
AutoCAD Inventor :: Can't Reuse Sketch In Adaptive Part
Mar 15, 2013I have an adaptive part which I created within an assembly. I created work planes in this file, based on features in the assembly, and created a sketch on one of these work planes. I used this sketch for an extrusion. then I wanted to reuse the sketch again for another extrusion - normally one needs to select 'Share sketch' from the right-click menu of the sketch, but this is not available. I have already experienced this (random) behaviour, i.e. the 'Share sketch' option missing from the menu. In those case it was ok to make the sketch visible, and then I could use it again. But now it doesn't work. I made it visible, but when I click Extrusion, Inventor wants me to create a sketch, claiming there is no usable sketch.
Inventor 2013
AutoCAD Inventor :: How To Make Attached Part Adaptive
Dec 1, 2012When I create part .ipt directly in assembly .iam, I can make it adaptive. I'm doing the projection of geometry. Detail goes adaptive. Geometry appears as a link.
But if I put in the assembly finished parts or remove part created in the assembly, and then insert it back, the adaptability of parts did not get to create. Then the projection geometry inserts usual nonadaptive geometry without reference.
Can I make a finished part adaptive, without creating a component at the place in this assembly?
AutoCAD Inventor :: Adaptive Cylinder Length Not Adapting?
May 28, 2013I am trying to adapt the length of a rod to join two nodes. The error message reads: The new constraint conflicts with existing assembly constraints.
A simple 3-part example is attached.
The middle part should adapt to connect the two cylinders. The middle part is flagged adaptive in both the assembly and the part. The adaptive dimension is not constrained.
AutoCAD Inventor :: Run Wire And Cable In Assembly
Apr 20, 2012I work for a company that does custom electrical enclosures and we use a 2010 version of inventor professional. What would be required to run wire in assemblies easily and also output wiring diagrams?
View 1 Replies View RelatedAutoCAD Inventor :: Cable Harness Renders
Feb 20, 2012I have these cable segments in my models. The problem I have is that when I render them or zoom out all of the work points and segment points become visible. It's only when zoomed in that they disappear.Look at the attached images for an example.I would really like my rendered videos to not have bright yellow spots.
View 2 Replies View RelatedAutoCAD Inventor :: Cable And Harness Tab Missing?
Jan 30, 2012I might be going mad but I seem to be missing Cable+Harness tab from the ribbon!!! Pipe+tube is there! but I seem to have lost the ability to do cable
View 1 Replies View RelatedAutoCAD Inventor :: Can Tabled Part In Assembly Be Made Adaptive
Jan 19, 2012Can a tabled part in an assembly be made adaptive? Adaptivity for my tabled part is greyed out.
View 1 Replies View RelatedAutoCAD Inventor :: Cable Harness In Drawing Will Not Hide
Dec 19, 2011I have created a cable/harness in my assembly. I have to edit the cable to change visability to centerline display in order to turn off visibility in a drawing view. The issue is that on one sheet of my drawing I need to show the cable, but not on the others. As soon as I turn the rendered display on, the cable shows up on all sheets and the visiblity command has no affect. Is there a hotfix for this? I don't remember a problem like this in 2011.
View 2 Replies View RelatedAutoCAD Inventor :: Cable And Harness Length Control
Jan 17, 2013I'm creating a wire assembly and i already have in me a length for my wire.
How can I apply this in my assembly for Inventor? It seems only the diameter can be specified but not the length.
AutoCAD Inventor :: Cable And Harness - Virtual Parts In BOM
Jul 19, 2013I would like to include Terminals and other virtual parts in het BOM on my drawing. For this I need to generate a report. I have defined my own virtual parts but somhow their properties are not accessible. You can see 88 items but this is the total of all segements and pins. Somehow partnumbers show as "---". I have included the report configuration file I am using.
View 2 Replies View RelatedAutoCAD Inventor :: Can't Write To Cable And Harness Library
Nov 26, 2013When I try to create a custom ribbon cable I get a message that reads:
"The cable and harness library is being edited by another user or is marked as read only. The Cable and Harness Library will be opened in read-only mode. No changes can be made to the cable and harness library, but wires and cables can still be inserted into the harness assembly."
In my project file I made "use style library" to = Read-Write
System Specs:
Windows 7 Pro
Autodesk Product Design Suite Ultimate 2014
Autodesk Vault Basic 2014
AutoCAD Inventor :: Cable Harness Rendered View
Nov 5, 2013I have a bit of problem that've been cracking my head. I create a wires, segments using cable harness environments in Inventor. After I created those, I want to see rendered image, but only centerlines appears. I have already change the harness settings into real image(rendered) but still centerlines appears.
Weird thing is that I create other assembly, it all works perfectly. But I cannot recreate my design, it is already so much work.