I made one scene in 3dsmax 2013 in 24fps.Is just a move and rotation camera animation.In another software(after effects) I made interpretfootage as 24fps, and the composite 24fps.
The final move apear like droping, jumping frames, a not cool sensation,May be just montion blur, but realy, apear like 3dsmax animation interpolating as 30fps.but in begin i already set the scene to 24fps.
I am trying to move a free camera along a path... but the 'target' not moving with it.
Is that correct even tho it does not have a 'target'?
To get camera & target to move together, do I need to move them both individually?
3ds Max Design 2012
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View RelatedWas wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
when using the ViewCube to rotate the camera around and get a different view, it seems to either have a mind of its own or centered on 0,0,0. I've been working on a project for awhile and when I'm editing and have something selected the camera rotates like it should but doesn't focus on what I have selected and sometimes it does. Does this camera rotate and move around the complete center(x:0, y:0, z:0) or am I missing something? I haven't seen anything posted about it so it may just be me but it is frustrating when you are working on a project and have to pan the camera around, zoom out if need be and find the spot you are working currently almost every time.
View 1 Replies View RelatedI am in perspective view, but when I try to rotate the camera, my mouse turns into a "No" sign (Circle with a cross).
View 1 Replies View Relatedthe same file that i'm trying to plot has it's own template that i want to use, but it's attached to a different layer. so when i try to move or rotate the template, it moves the other objects. They all have colors but aren't connected to the same layers of their colors. how do I isolate the layers so i can make it's own layer and manipulate it on it's own?
View 9 Replies View RelatedHow do I to rotate planets around the sun?
View 2 Replies View RelatedI'm trying to rotate a target cam around an object. It is part of a bigger animation. so the use of a spline would be no option.
Is there a way to retain a fixed distance between the camera and the cameras target?
3ds Max Design 2011
Win7 HP Xeon 16 core 3.30 GHz
32 RAM with Nvidia Quadro K5000
My CorelDRAW has just developed a glitch - I can select objects but not move them (other than by using the nudge button) and if I click twice on the object it doesn't change the nodes to allow me to rotate - weird and seriously difficult to do any work in the programme. I've tried turning the computer off and on again and have tried the default setting.
View 5 Replies View RelatedHow do you rotate or move just one or two points in civil 3d? The surveyor used Translate Survey Database and moved all the points, but 4 of them were not included. What is the difference between translate and just the autocad command move and rotate?
View 5 Replies View RelatedI thought there was a way to insert an image (tif) to model space, and adjust it like you would any line or polygon. Apparently this is not the case. When I attach an image, where I place it is permanent and I can't even select it.
View 3 Replies View RelatedHow can I move (rotate or otherwise transform) a Selection.
1. Suppose I have a single Layer, on which I draw an image.
2. Now I activate a Selection Tool (Rectangular, Elliptical, Lasso, etc.) and make a Selection.
3. Then I activate the Move Tool and click on the "Move Selection" option, not the "Move Layer" option. [Oddly, when the "Move Selection" option is activated, there are two greyed out (unavailable) sub-options, both indication "Move Selection".]
4. With the Move Tool, I am able to move the Selection, but not the contents of that Selection.
The Gimp Documentation guide says:"If you click-and-drag the selection without handles, you create a new selection! To move the selection contents, you have to hold down Ctrl+Alt keys and click-and-drag the selection. This makes the original place empty. A floating selection is created. The required key commands may differ on your system, look in the status bar to see if another combination is specified; for example, Shift+Ctrl+Alt."
I have tried every combination of Shift, Ctrl and Alt (Shift+Ctrl, Ctrl+Alt and Shift+Alt). None of these allow me to move the contents of the selection. Further, there are no "handles" on the Selection. I suppose the key is to get the handles to appear, but I have not been able to discover the secret combination of keys to make that happen.
I am running Windows XP Pro.
I've run into Paint.NET a few weeks ago. I think it's a very good choice for beginners (and maybe professionals too) at a graphic field. I've made some cool pictures (with some cool plugins inside Paint.NET or published at the forum) and now I wanna to make my own plugin.
The question is how to move and rotate a specific part of image at source canvas. The rest of the image must be untouched. I consider it's impossible to use Layers -> Rotate/Zoom tool directly (correct me if I'm wrong). So I should use a piece of C# code. I think source code of Rotate/Zoom tool would be very useful too but I couldn't find it.
I want to rotate my image into a animation gif. I can spin it like the face of a clock but not spin it around a central X axis (like a globe spins). How can I do this?
View 7 Replies View Relatedhow do i rotate a lightsaber without affecting the blades? whenever i try to rotate the hilt and the blades, they rotate separately(look at the attached file). and when i attach them together, the glow effect disappears. is there another way to do it?
View 3 Replies View RelatedI'm trying to make a FK arm with the ability to stretch in Max 2012, but as soon as I assign an orient constraint to the elbow, the stretch ability disappears.
The file consists of two bones, two spline controllers, and an expose transform. The upper arm bone is orient and position constrained to the shoulder controller spline. The exposed transform reports the distance between the elbow spline controller and the upper arm bone. The lower arm bone, has a "Float Script" on the X Position transform and it takes the distance reported in the exposed transform to adjust its position relative to the upper arm bone.
If I select bone_elbow and assign an orient constraint, the "Float Script" on the position stops working, but the rotation works.
(I'm trying to keep the controllers out of the heirarchy of the bones because our game engine will export them and I'm trying to avoid that)
How can i rotate an object between specific frames that has a path constraint? Here's a rough (mouse) sketch of what i'm attempting to do:
View 5 Replies View RelatedI want to rotate three objects along a circular orbit, horizontally. But I want the objects always facing camera. I added the three objects to my comp, added a circle shape layer and rotated it to lay horizontally, then placed each object along the circle shape, rotating it slightly for each new object, then parenting each object to the circle once it was in the right place. From there, I added a camera and a null, parented the circle shape to the null, and set keyframes to rotate the null along the Y rotation.
The result is that the objects indeed rotate along the circular orbit, as I want, but they TURN as they rotate, which is not what I want. I've tried applying "Auto Orient...Orient Toward Camera" and "Orient Along Path", neither of which work. I've applied this to the null, the circle shape, and the objects. They all still turn.
Here's a screen for some context: Using CS5, but have a trial of CS6 if that's useful
I have a surface. I have a lot of operations done (points adding, breakilines, borders, etc) I want to move and or rotate and change datum.
I have seen old post.
Ok, I have to select the definition data, to transform it and finally rebuild my surface.
I select them and simply move it.
mmm. Something is wrong. Maybe a bug... I have 12 duplicate points (false) , I have missing points, I have a crossed two breaklines.
The data used is very simple, 15 breaklines, 50 points (so there is no reason to think on big data problems...) I have nothing at edit branch.
Drawing started in LDD a few years ago. It was on a local coordinate system of 1000,1000.
The drawing has since been migrated to C3D2012. Now we have data in UTM coordinates that we need to match to the old data. Actually, we want to shift/rotate the entire original set of data to match the new UTM data, so we can continue in UTM for all future data collection.
So, I went through and turned all layers on, Thawed them and unlocked them. I made sure all points were visable, etc. Then I tried to move the original data (I also tried the align command, etc., with the same results) and found a glitch. After I moved the data, I found that there was some points and survey figures as well as a cooridore, that had not moved. The vast majority of the drawing had moved as expected, but the afore mentioned data would not move.
I would like to reuse the existing sketch on the other part. Usually I did it without problems. But now after I have pasted the existing sketch I cannot move or rotate it. While moving or rotating Inventor usually prompts for braking some constraints for this action. But nevertheless it does not allow me to move or rotate. It says something about "constraint settings for sketch edit tools" -- cannot get any hint of that in a whole phrase nor in part [URL] what else Inventor wants so I can reuse my sketches??
View 4 Replies View RelatedI use Acad and Turbocad selectively. I can't find a way to enable Acad to have object handlers to move and rotate objects. Is there a setting that I can enable to turn this feature on in Acad? I like this feature in Turbocad, but like to have in Acad.
View 7 Replies View RelatedIs there a way to change the marker size when selecting objects for move, rotate, trim, chamfer..etc commands?
I have tried Autosnap Marker Size, aperture size and cross hair size from the options menu with no luck.
If there is a quick easy way to spin an object, rotate it on one axis through the 360 degrees a number of times.
View 2 Replies View RelatedI am trying to rotate a set of wheels that are moving like a locomotive train wheel and having problems. I was able to animate the wheels to move like a locomotive wheel by linking and turning off the z axis inherit for the red rod (see attached images. Image ex04.jpg.)
The problem came when it was time to rotate the whole thing. I grouped everything and rotated the wheels around as a group. As the red rod had is z axis inherit turned off once it started to detach from it location(ex06.jpg), which was kind of expected.
I am not sure what to do to solve this problem. Do i create a bone structure with IK handles to resolve this problem or is there something else better to solve this problem?
I am trying to model the following simple structure:
I made this example by creating a new polygonal cylinder, rotating the top edges that are to the right of the x-axis and repositioning the affected vertices afterwards, but doing it that way just doesnt feel right, it seems too unclean to me.
I would like the affected vertices to only move on a given axis when rotating the edges, so I dont need to reposition them after the rotate operation. I tried to illustrate what I mean in the following screenshot:
The edges I want to rotate are marked in red, the vertices that are supposed to only move on the y-axis are marked in green. The arrows indicate the desired movement.
Is this way of rotating an edge possible with the rotate tool or something?
Any routine (perhaps a lisp) to move, rotate and align text with one swift command?
Something like this video below.
What I want to do is to combine two commands, editing (copy, move, rotate) and change layer.
View 3 Replies View RelatedI'm working in the fashion industry where we are creating a lot of patterns and textile designs.transform pattern inside a vector shape without having to move the vector object :
To transform patterns but not objects when using a transform tool, hold down the tilde key (~) while dragging. The borders of the object appear to be transformed, but when you release the mouse button, the borders snap back to their original configuration, leaving only the pattern transformed. URL..
It seems this shortcut works only with US and UK keyboard.
I'm using a french keyboard where it doesn't work, probably because there is'nt any key especially dedicated to the Tilde sign (~), and you need to combine multiple keys to get this symbol (Alt GR + the key 2 above the key Z) .
I finally found the shortcut on MAC which is the keyboard key with the britisih pound sterling symbol (£). But not on PC !!!how to get this shortcut on PC with a french keyboard ?
Is there a way to change the shortcut for this very useful option, without having to take care of the kind of keyboard ?