Is there a way to Copy and Rotate something at the same time? If I click on the rotate icon, I can rotate the object(s) in question but I cannot copy them from where they are. It just moves them on a rotational axis.
View 9 RepliesI like to think of myself as pretty competent in AutoCAD but I can't figure this one out for the life of me...
I hope I can explain this clearly: When I rotate an object using grips, the object is not shown spinning in real time. I select the object, pick the object's grip, hit <Enter> <Enter> to go into the rotate command and the object will rotate maybe 45^ or so and freeze (visually).
If I use the command line "Rotate" command, the selected object(s) spin in real time or if I use grips to rotate but then use an object snap, it begins to spin in real time for some reason.
I would like to use grips to rotate my objects and be able to see them rotate (like I used to in previous releases).
I have ACAD Civil 3D 2010.
Noticed that the multiple copy option has been removed from the rotate command? It used to be that I could choose the copy option in the rotate command and set a reference angle to create multiple copies of an object based on a rotational axis. Now the command will let you copy based on a reference angle, but only once. Is there a system variable I can set to bring this option back?
View 1 Replies View RelatedIs there a way to change the marker size when selecting objects for move, rotate, trim, chamfer..etc commands?
I have tried Autosnap Marker Size, aperture size and cross hair size from the options menu with no luck.
I am curious is it possible in CorelDRAW X6 to move (change Position) of an object and Rotate it at the same time?
What I am after: To create raw of equally spaced (given space) multiple (e.g. 21) successively rotated (given angle) images.
CorelDRAW X6
What I want to do is to combine two commands, editing (copy, move, rotate) and change layer.
View 3 Replies View RelatedWhen using the rotate tool, you used to be able to use the hand tool even when the Rotate dialogue box was up. Is there a way to get that back?
I make Mandalas [URL] and work from the center out. This poster is 18"x24" so once I start to get to the outer edge, I'm zoomed into the center at 6400% so I can get my crosshairs as precise as I can, then enter a number (45 degrees, 20 degrees, etc.). Clicking Preview works, but if you're zoomed in and the object is out of view, you have to guess where it's going. In CS5, you could press down the space bar and use the Hand Tool even while the dialog box was up.
Is there a plugin that allows real-time rotate/scale of a selection (like in photoshop) ? The way it works stock is the only annoying thing in gimp that makes my work unnecessarily harder.
View 7 Replies View RelatedIs it possible to enable in Gimp the function to rotate the canvas in real-time while drawing with the graphic tablet; like Sketch Book?
View 2 Replies View RelatedI found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
I have a macro that i have been using in autocad 2012 for a simple copy & rotate command as follows
^C^C_select;auto;\_copy;p;;0,0;0,0;_move;p;;\_rotate;p;;\redraw
For some reason it now does not work in 2013 the macro exits after the copy part of the macro is finished & fails to let you rotate the copied object.
Any lisp routine where you can select objects and do a global rotate, scale, etc. from each object's insertion point ?
View 9 Replies View RelatedI created 3 lines linia1 linia2 linia3 in vba for autocad. How to select these lines and copy them ( as 1 entity) from point A to B at one time. I also would like to change a scale of these 3 lines. add line to this code
Public Sub Copy()
With ThisDrawing.Utility
Dim k0Deg As Double
[Code]....
why does it take ages to copy and paste from one drawing to another
View 3 Replies View RelatedIs there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View RelatedCan I copy from more than one layer at a time, without merging the layers together? If there's a way to do this it would save me a ton of time (working on animated sprites for a video game).
View 6 Replies View RelatedI'm intermediate (at best) with Illustrator. I'm using CS6 on a 2009 iMac. How to make Illustrator ignore stroke weight/cap/join settings when I'm applying a live rotate/multiple copy effect on a group of paths? Currently, Illustrator sets the rotation point to the outermost part of my stroke (figuring in the strokes atrributes), but I only want it to calculate the from the path's structure: the coordinates of my designated anchor point.
Here's the top/right group of paths with a rotate/ 3 copies effect of 90 degrees. Looks problem-free at this view.
Here's that top/right group of paths with the addition of a reflect/ 1 copy effect of X-axis. Still no apparent problems.
But here's a close up of the misalignment of corner points. As shown, the Transform effect is based off the strokes attributes (the tip of its corner), not the actual location of the corner point.
It does not apply different cap/corner styles or stroke alignments; that only slightly nudges the pivot point to the center.
Plus, this one point stroke is somewhat arbitrary. I only set it so in order to see my dynamic effects.
Tweaking the vertical/horizontal moves effects of the rotated/copied elements won't support because this art will later undergo lots of alteration, mostly changes in stroke weight (maybe even variable stroke width).
I need the skeleton of my structure to snap together precisely.
Any solution, no matter how roundabout, would save this project!
I've gotten to where I can at least select the letter, but then when I try to copy and paste, maybe I'm not using the right buttons? Ctrl-c for copy? And Ctrl-v for paste right?
I can move the individual letters by clicking the pixel mover, but since I need a double shot of two letters--one a 'c" and one 'p' I'm up the creek if I can't copy and paste the one I've got of each.
I'm recently re-scanning some photos that were originallly scanned quite a few years ago. Giving them the same name as the previous scanned (only with a _1 at the end), I import the newly scanned photo to the same folder (which is how I organize my photos), to be able do compare and later copy metadata from the original scan to the latter. As I haven't yet done any flagging or rating, most metadata will contain only keywords. But stored under "Metadata" in Library view, "Capture time" is also stored, but I cannot find it anyway among the "Copy Metadata" options. Is there something I have missed, or is there a work-around somewhere?
View 2 Replies View RelatedWhen printing from photoshop CS5 I am unable to print more than one copy at a time. Printing one copy at a time is annoying and time consuming!!
View 1 Replies View Relatedslow copy to clipboard? I have pinned it down to my virus protection. I use McAfee and I notice that my CPU goes up considerably when I do a copy to clipboard under mcshield.exe. When I turn off the McAfee, copy to clipboard in X6 works fast and perfectly.
View 3 Replies View RelatedOnly just noticed this one since upgrading from LR4 Beta to LR4. First session developing a few shots taken over the weekend (.CR2 RAW files). When I only have a few shots, all taken in the same environment, I tend to just get the first one right and then Copy the Develop settings, and paste them onto each subsequent shot.
What happens on my 64 bit Windows 7 box - the first time I paste the settings to any shot, I get the task bar appear at the top right, which after a brief time changes to 'task completed' - but no settings have been pasted. If I then paste the settings it works the second time.
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies View RelatedI note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedI have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).