I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 RepliesI'm having an issue printing to a Panasonic DP-C322 PS printer. I send my image and ask it to print multiple copies. The result is just a single copy of my image. If I use the PCL driver, the image prints in multiples, as expected.
View 1 Replies View RelatedI recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
how to add macros to my ACAD 2014 to count blocks, I managed to lose the "copym" command while trying to figure how to create a button in the user interface found in the ribbon bar under the customization tab...when I type copym into the command line, it wants to prompt me to finish the command string using the command "copymode" and doesn't even see that the command "copym" even exists in the list that is created. (the list that's created by an autocomplete function)
I found the command in the list while making a pull down menu item selection button for "copym" utilizing the user interface in the ribbon. I drug the command info for "copym" to the menu bar using the user interface feature. The command is there, all the info seems to be correct, I even managed to make a menu selection for it in the pull down menu. But when I select that menu item, the command line says: UNKNOWN COMMAND "COPYM" Press f1 for help.
I think I accidentally deleted something, just wondering how I can get my "copym" command function back into AutoCAD from never-never land.
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I am having a problem with memory. I am running Windows XP with 4GB ram. when i start laying out in paper space, i copy the window in one page or copy multiple pages, every time i copy a page of window my memory builds up & up & up with each one until it gets to over 2 GB & the it tell me that if i continue with this next process CAD will crash because i have maxed out the virtual memory. This is usually not a problem when i am doing smaller one off drawings with a few pages of windows but when i am doing a bigger project with 20+ pages or windows i run out of memory.
I gave the latest file to my business partner & he does not have this problem at all. He can open up many windows & as many pages as Cad will allow. His memory always fluctuates around the same 2GB. He is running Windows 7 with 4 GB ram.
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
when i try to copy drawing,''copyclip unkown command' showed up, what should i do
View 1 Replies View RelatedUsing the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
Level: Intermediate Os: Win8 Ps: Cs6
I have forgotten how to do something
I would like to make a Shape ~ a Rounded Rectangle ~ and then I want to make a total of six that are exactly the same and aligned one under the other with the exact same amount of space between them.
I recall watching a video one time and it showed how to easily do this without just using the Alt key to make one Copy/Duplicate at a time etc. The author of the video made one Shape at the top and then an other at the bottom and the she went to the menu/options bar and chose something that allowed her to enter a number such as 6 (being the total sum) and then Boom!, they were all made and aligned perfectly.
I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around.
View 2 Replies View RelatedWe upgraded to AutoCAD 2013 earlier this year (from 2002 - archaic!), and I've run into an odd glitch when using the batch plot utility. It seems to work fine when I'm only making one copy of a set of drawings. When I need to print more than one copy, Bathc plot does one of two things: it either plots a single complete set instead of the quantity I have entered, or it prints the correct quantity of all but the last sheet I've requested. It doesn't seem to matter how many sheets in the set, or how many copies, and I have yet to find a way to predict which outcome I'm going to get.
View 1 Replies View RelatedIs there a way to change the key-in for "Copy" to "C" and then "Circle" to something else?
View 9 Replies View RelatedI'm doing a work where i need to copy many layouts. I can set a few at a time, but doing one at a time is faster (in the end). However, rightclicking the mousebutton on the layout, copy it and scroll to the bottom to 'place at end' it time consuming.
I rather have a lisp of some kind that can copy the current layout and place it at the end (most right) of the layout tabs.
if it is possible with some -command (commandbar) i can do it myself, but i can't find any command to do so...
In the current drawing I am working in, when I copy a viewport using CO command it copies the viewport but nothing is seen in it. You cannot active it like a normal viewport; it turns into just a square. I do not have this problem in any of my drawings, just this one. If I copy the viewport by right clicking copy with a base point then paste it in the drawing, the viewport works fine. This is more time consuming then just using the CO command.
View 9 Replies View RelatedIn AutoCad LT 2013, on Windows 8, I experience a 1/5 - 2 second delay afte 'enter' on a Copy command. The enter may be used in either right-click command or spacebar modes. This is the only delay I am experiencing in any command used so far. Other than that, the 2013 is flawless in Windows 8.
View 1 Replies View RelatedAny issues when copying certain object within my drawing from one part of the drawing to another, after selecting the objects I want to copy, I select the destination point and I cannot see any of the objects that I am copying, the command stops working and then I cannot see any objects in my drawing at all....its like I am zoomed out all the way and nothing is in my drawing...I save the drawing as is (seeing nothing on my screen)...calling it up again and all my linework, etc. is there again...it has happened in two different drawings so far within the last few months, and these dwgs. are not linked to each other at all....
View 2 Replies View RelatedIs there any way to use the copy command in such a way that the new objects are selected when I'm done copying? Perhaps a LISP of some kind?
View 6 Replies View Relatedi have a 1000+ table i need to put there formation Level which one i need to subtract from PGL level so any .lisp or any method how to subtract it if manually i need to minus each value from PGL
suppose my PGL at offset 5 is 105.452 so i need to show on offset 5 Formation Level so i will minus 105.452-.63=104.822 is Formation level is there any good option to subtract table automatically
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
How would I copy a single clip from 1 project to another?
View 1 Replies View RelatedVersion of the CHSPACE.lsp command that has a "copy" option like the one from Intellicad?This version makes a copy of the selected objects first then moves them into the space you want, leaving the original objects alone in their original space.
View 3 Replies View RelatedWith the code below the draworder is not retained , does anynone knows how to retain the draworder in a .net copy command?
Function MaakKopie(ByVal objIds As ObjectIdCollection) As ObjectIdCollection
MaakKopie = New ObjectIdCollection
Dim doc = Application.DocumentManager.MdiActiveDocument
Dim dwg = doc.Database
Using doc.lockdocument
Using transactie = doc.TransactionManager.StartTransaction()
[Code]....
get any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
I have text from dt command, circle and leader line. After selecting them I use the copy command and starte pasting all over my drawing. Probable about 6 copies. about 3 or 4 of them end up not being able to select them. So if i want to edit the text, move all three entities or just delete them i cant. I figured out the only way to delete these "unselectable" objects i copied is to only have that layer on, type selectall and delete. Why this happens and why if i did 6 pastes it only happens to 3 or 4 of them? does it have to do with feature lines? I do have 3d lines in this dwg but i should still be able to select what i copied.
View 7 Replies View RelatedWhenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies View Related