AutoCAD 2013 :: Batch Plot Multiple Copies
Dec 14, 2012
We upgraded to AutoCAD 2013 earlier this year (from 2002 - archaic!), and I've run into an odd glitch when using the batch plot utility. It seems to work fine when I'm only making one copy of a set of drawings. When I need to print more than one copy, Bathc plot does one of two things: it either plots a single complete set instead of the quantity I have entered, or it prints the correct quantity of all but the last sheet I've requested. It doesn't seem to matter how many sheets in the set, or how many copies, and I have yet to find a way to predict which outcome I'm going to get.
View 1 Replies
ADVERTISEMENT
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Jun 4, 2012
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies
View Related
Aug 28, 2013
Not sure if I am supposed to specify the PDF printer in the Page Setup or the upper left of the batch plot dialog box.
Also, why is it that every time I open batch plot it loads all the current layout tabs in the drawing (which I dont care about). How do i open batch plot and specify my sheet list and not have to "replace all sheets"/
View 9 Replies
View Related
Dec 27, 2013
ACAD 2014
I normally turn off the Batch Plot (Save As List) feature cause I never use it, however recently I turned it on and saved my choice.
How do I turn it off again? Is there a variable for this one?
View 2 Replies
View Related
Jan 2, 2013
Using autocad 2013 and if I choose plot and do dwg to pdf and choose the page setup I want which is landscape,Plot area limits,center plot and fit to page with monochrome pen. then my drawing turns into a pdf just fine.
I am tring to print a drawing set of electrical drawings using the batch plot and I am getting them to plot to pdf as a all drawings in a single file and all drawings as individual files but I don't see a way to set it to monochrome when using the batch plot and all my draings are plotting with the layer colors.
How can I change the batch plot to use monochrome?
View 2 Replies
View Related
Jul 1, 2013
I've never used batch plot before but I have a file that has multiple views set up in view manage in model space that I need to print. I've found instructions on how to do it from paper space but not model.
View 4 Replies
View Related
Jan 3, 2013
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies
View Related
Oct 18, 2012
is it possible to have multiple plot style tables in one drawing ?
The purpose would be to plot xrefs with plot style table x while maintaining the company's plot style table for the drawing itself. The output would then be a plot in proper style for all parties involved.
This would save us the job of converting the layerstructure we get delivered by external parties to our own.
View 2 Replies
View Related
May 3, 2012
I have moved from VBA to .NET. Is there a way to access the "Number of copies" value as set in the Plot dialog? I know this value always gets re-set to 1, but I want to know if it is possible to get the value set by the user *after* clicking OK in the Plot dialog. "Number of Copies" does not seem to be exposed as part of the "Layout" object in .NET (nor was it in VBA). Is it available anywhere else? Is this stored in the registry, and if so where is it located?
View 4 Replies
View Related
Jun 28, 2012
Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.
Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish
Result - only active dwg prints
View 1 Replies
View Related
Mar 17, 2011
AutoCAD 2011 - XP - 2 Machine office
When I use the pdf plot drivers from AutoCAD or the export to pdf option the resulting pdf is not available to the other computer trying to access it through a shared folder.
When I plot to pdf with batch plot or export the drawing to pdf and save the file in the shared folder, the other computer can not open the pdf (file not found) or attach the file to an email (you do not have permission)
Why is this? All other files share and open fine. Only pdf files from batch plot, plot to dwg to pc3, or export to pdf. This is a pain and I still have to use another plot driver (cutepdf) to get a fully useable pdf for our office.
View 1 Replies
View Related
Sep 1, 2011
I have this script that basically makes a shape expand by adding an outline, conveting the outline to an object, and then welding the whole thing together.
I have the script set to execute with hotkey ctrl+numpad+
The odd thing is, when I run it once, it seems to work fine and only one object is left, but when I hold down ctrl and press numoad+ over and over again, it seems to produce a new copy of the object everytime.
I'm not sure why this is happening, but I need to get it to stop.
Sub Expand() EventsEnabled = False 'Dim vars Dim c1 As New Color Dim OrigSelection As ShapeRange Dim OrigColor As Shape Dim width1 As Double Dim height1 As Double Dim minSize As Double Dim Thickness As Double 'copy color of current selection Set OrigColor = ActiveShape If OrigColor Is Nothing Then Exit Sub If OrigColor.Fill.Type <> cdrUniformFill Then Exit Sub c1.CopyAssign OrigColor.Fill.UniformColor 'get thickness to increase by Set OrigSelection = ActiveSelectionRange OrigSelection.GetSize width1, height1 If width1 <= height1 Then minSize = width1 If width1 > height1 Then minSize = height1 Thickness = minSize * 0.035 OrigSelection.SetOutlineProperties Color:=CreateRGBColor(0, 0, 0) OrigSelection.SetOutlineProperties Thickness, ScaleWithShape:=True 'weld Dim s1 As Shape Set s1 = OrigSelection(1).Outline.ConvertToObject Dim s2 As Shape Set s2 = s1.Weld(OrigSelection(1), True, True) 'auto reduce 's2.Curve.Nodes.All.AutoReduce 0.001 's2.Fill.ApplyUniformFill c1 'delete remnants OrigSelection.Delete s1.Delete 'OrigColor.Delete EventsEnabled = TrueEnd Sub
View 5 Replies
View Related
Nov 22, 2012
I have been going through my catalog & find hundreds of old pictures what I should delete as they will almost certainly never be looked at or used again. If they were to be reused I could probably only need a copy that was much smaller in size. Rather than just delete them I was considering making the files size much smaller.
Is there any way yo use the batch processing tool to resize hundreds & have them saved by overwriting the old copy rather than have them as a version set? I didn't want to do this one at a time.
View 1 Replies
View Related
Jun 16, 2011
We are running Civil 3d which we jumed from Land Desktop 2004 (I know, wow). I cant figure out why I cant bulk plot my tabbedd sheets like I could in previous versions. I can PUBLISH in bulk, but not PLOT.
Am I missing something here?
View 5 Replies
View Related
Aug 24, 2010
I have a design file that has and alignment with 3 profiles (one surface profilke and two layout profiles)
All these are data referenced to the project. Then they are data referenced into a new file. I bring in one of the profiles that brings in the alignment. Lets call it "Main Street". Then I create another reference to another one fo the profiles and it brings in a copy of an alignment and calls it "Main Street (1)"
This is a pain because I cant get a profile view to show all the profiles because the profiles are associated with three different alignments "Main Street", "Main Street(1)", "Main Street(1)(1)"
This is only happening with one of the of the alignments. The other alignment has all its profiles listed under one alignment.
View 6 Replies
View Related
Apr 29, 2004
Does Photoshop have a multiple print option outside of the pciture package feature. I need to print multiple copies of one piece of art work. So say i make a post card or a business card and iwant 37 copies of it or i want to see how many can fit on one page. Does that make sense?
View 6 Replies
View Related
May 29, 2008
I am working in Illustrator CS (but this also happens when I open the file in CS3). I am on a Mac.
When I choose "open" or when I double click a particular file in the finder to open it, Illustrator opens two copies of it. FYI, the original file is named "AuroraTank.ai" But, when Illustrator opens the file, it opens one copy as "AuroraTank.ai:1" and the other "AuroraTank.ai:2". If I edit one of them it makes the changes simultaneously on both.
All of my files do not open this way so I must have saved it with a certain setting? What did I do to make Illustrator behave like this and how do I stop it?
View 3 Replies
View Related
Mar 14, 2005
i have an image of a babys eyes and want to make a page of that same image in mono, sepia, taking out the green, blue etc. in other words, all different representations of the eyes on one image.
i ve no problems with the changes in the eyes image, but dont know how to fill a new blank image with multiple copies of the eyes.
View 4 Replies
View Related
Oct 26, 2012
I want to have multiple copies of the same catalog 3 different drives
i have 3 drives , I want to have the same catalog on all 3 drives along with the photos.
1 drive would be my main catalog
2 drive would be back up with all the photos
3 drive is my traveling presentation drive with all the photos
View 1 Replies
View Related
Sep 27, 2013
I have one layout. On that layout I want to have 2 viewports. I also have ssay block A and block B I want to insert.I would like Viewport1 to display block A and viewport 2 to display block B.
What happens to me is when I created Viewport 1 and inserted block A. I go on to create viewport 2. But viewport 2 displays only block A, which I cannon delete to insert block B.
View 1 Replies
View Related
Nov 13, 2012
New hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
View 5 Replies
View Related
Oct 1, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
I cannot remember what the trick is.....i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I find the setting for batch plot not very user friendly at all....
View 9 Replies
View Related
Jul 5, 2011
I am trying to plot over 100 drawings to PDF. They are mechanical drawings and the details need to be clear. I tried a batch plot, but when printed in 11x17, everything is a bit fuzzy on the PDF. I tried a PDF convertor, and it was very clear, but it put a large, "Free Trail" logo in the center, ha.
View 7 Replies
View Related
May 3, 2011
I'm tring to plot 26 or so sheets into a single pdf or multiple pdfs and I get this error every time with no file being created.
Job: - Canceled
Job ID: 1
Sheet set name:
Date and time started: 5/3/2011 11:48:29 AM
Date and time completed: 5/3/2011 11:48:33 AM
UserID: RGDC99
Profile ID: AutoCAD MEP (US Imperial)
Total sheets: 2
Sheets plotted: 1
Number of errors: 1
Number of warnings: 0
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ALERT.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Plotted with Error(s)
File: Z:\_xxxxx\_xxxxx2011 ProjectsxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
ERROR: Internal Error: Null Pointer
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ERROR.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Error(s) Did Not Plot
File: Z:\_xxxxx\_xxxx2011 ProjectsxxxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
View 4 Replies
View Related
Apr 6, 2012
So when I batch plot I get the name of the drawing file followed by a dash then the tab name. For instance the drawing file is: MSA-01 Plans.dwg and the tab is W-101, when I batch plot I get [MSA-01 Plans - W-101.pdf].
We never had duplicated sheets so I was curious to save the time of me cleaning up the file names everytime, if I could batchplot with just the tab name.
View 1 Replies
View Related
May 3, 2011
I have used Corel since Version 8.0 on Macintosh and Version X3 on PC with no problems with printing to Primera CD printers of various models. Also on Mac running Parallels and X3
I have had to go back to X3 on XP and Windows 7 to enable multiple copy printing.
Using the latest printer drivers where available and removing and reinstalling the drivers under XP and Win 7 with Corel X5 has had no effect. Both versions of windows are new clean installs on a dual processor XEON PC.
why this doesn't work. I have noted that other Primera printers have the same problem and I don't want to use the PDF option.
View 2 Replies
View Related
Sep 2, 2012
I want to rename multiple files, but each time I try, it creates two copies of each file, and as they are numbered sequentially, I cannot just delete the extra ones at once. I don't understand why it does this, and how I can avoid it!
View 5 Replies
View Related
May 29, 2013
1. Elements 11 Organizer often creates multiple copies of the same picture. How can I stop this?
2. Many pictures has a small questionmark in the upper left corner, stating that the file is missing, even though I can see the picture (a bit blurred, but still). What's wrong?
View 2 Replies
View Related
Apr 18, 2013
Create shape > Transform > Move horizontal or vertical > select number of copies (missing!)
This was one of my favorite tricks but it looks the ability has been removed in CS6! So now if I want to make a sequence of shapes how can I do it?
Adobe fail? or am I missing something?
View 5 Replies
View Related
