AutoCAD Print / Plot :: Batch Plot To Printer Via Publish
Jun 28, 2012
Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.
Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example: First Layout : Plotstamp resides on Layer 0 Second Layout: Plotstamp resides on Layer 3P Third Layout: EQPT-VC etc
Some general information: Autodesk AutoCAD 2011 64bit Autodesk DesignReview - 2012 Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
How to turn plot and publish log file off? (see attached pic)
I found out how to turn the one off under plot stamp settings, but I would like this box to be unchecked also and I want to do it automatically for all my users.
[URL]....
Civil3D 2014 SP1 Win 7 Professional - 64-bit HP Z400 Xeon W3550 @ 3.07Ghz 24GB of RAM Nvidia GeForce GTX 760
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
I am using Autocad 2010, and have upgraded to windows 7. When I publish to pdf using Dwg to Pdf.pc3, my options (single-sheet file, do not include layers, etc.) are ignored and I always get multi-sheet files with layer information included regardless of what options I select.
I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
We use an in-house plotstamp (not the acad plotstamp) which uses rtext to show the file path and name. It works fine under all circumstances EXCEPT when we plot using the Publish command. The output from Publish shows the file path as the C:Documents and Settings... where the acad2005 software is installed instead of the correct network drive path where the dwg files are located.
Is there a secret setting somewhere that will keep Publish from changing the rtext? If we switch from rtext to fields, would that eliminate the problem?
One workstation out of 50+/- when we publish, does not show the drawing prefix on the sheets in the "Sheet Name" list. The attached file shows a good list but that one computer is missing the prefix and if we're attempting to publish several drawings in model space, they would all have the same name so AutoCAD will not allow it because they would all have the same name . How do i get this drawing name prefix back?
I'd like to start using the auto-publish feature in Autocad, however the options for the file location are pretty limited. I'd like to set it to something like the following:
../transmittals/current issue/
but the options I'm presented with is either an absolute location, or the drawing folder or subfolder.
Is there a sysvar or a registry setting I can tweak to make this behave to my liking?
I have C3D 2010, 2011, and 2013 installed on my pc. I use the Publish command almost daily, and haven't had any serious issues with it when using 2010 or 2011. But in 2013, when I publish it just sits on the same screen and never actually publishes. I have tried turning off Publish in Background, I have checked that the printer support paths are the same as in 2010 and 2011, and I have tried Publish with different Page Setups.
When I try printing, autocad gives me the following message (see attached pic). I deleted that driver out of system preferences. Yet it sitll keeps looking for it. I get the spinning rainbow for about 5 minutes, the the print dialogue eventaully comes up. I can print, but that takes over 5 minutes as well. Seems like autocad gets stuck in a loop looking for a driver or something. How do I fix this. Printing a single pages takes me about 10 minutes. Do anything within the page setup manager results in a spinning icon for a few minutes as well.
My company will be getting a new large format printer to replace the current one we have. We don't have room enough to have both running at the same time so I'm imagining one-day down then viola, we have a new printer.
How I can prepare for this as far as creating the necessary Plot Styles, pc3, pmp...files? Because i have many items on my to-do list, this could take a day or two with all the testing and i can't image the uproar from our CADers about going without a plotter for two or three days.
When I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
I have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
I don't remember ever using this checkbox on the Publish dialog box but today i want to and i can't figure out how to make it work. The help file ~seems~ to say that if i select this, the contents of all open documents (layouts and/or model space) are automatically loaded.... but they don't.
I know i can pick the Add Sheets button and manually select all the drawings i have open but doesn't that defeat the purpose of this checkbox?
I am having trouble using the publish command when I set the plotter to a 22x34 sheet. We are able to print to an actual plotter just fine at that size, but when we try and make a pdf set at that size, it just errors out.
I have a HP DesignJet 110 nr connected as a network printer. I have all the drivers updated including the network card. I have unistalled and reinstalled all the drivers and software. I have also replaced the ink cart. too. When I print in AutoCAD 2011 it acts like it is printing stuff, but it goes throught the whole process and nothing prints. I just started creating PDFs and sending them to the printer, but thought I would give it a new shot.
I tried printing a plan with my printer and for some reason it wont print in portrait mode, no matter how much i change the settings it does not change the page orientation, the preview also shows it to be in landscape mode
I have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
The Publish to PDF option in the Sheetset Manager which I believe is using the native/built-in AutoCAD 2012 PDF driver is creating PDF's with incomplete and inconsistent graphical content. See attached PDF examples wherein the PDF "...(CONTENT GOOD)" created via CutePDF Writer contains the desired output...
Note both PDFs were plotted with essentially the same plot settings, driver excepted...
