AutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot

May 21, 2013

I have one drawing per file at model tab. When I need to plot a multiple page file, I use:

Print > Batch Plot.

The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.

Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.

View 1 Replies


ADVERTISEMENT

AutoCAD Print / Plot :: Plot Multiple Sheets

Jun 16, 2011

We are running Civil 3d which we jumed from Land Desktop 2004 (I know, wow). I cant figure out why I cant bulk plot my tabbedd sheets like I could in previous versions. I can PUBLISH in bulk, but not PLOT.

Am I missing something here?

View 5 Replies View Related

AutoCAD Print / Plot :: Batch Plot To Printer Via Publish

Jun 28, 2012

Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.

Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish

Result - only active dwg prints

View 1 Replies View Related

AutoCAD Print / Plot :: Page Setup In Batch Plotting

May 27, 2011

I have a list of drawings which i want to batch plot using dwg to png plotter.  I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space  

When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none,  how do i make it see the page setup i want?

View 1 Replies View Related

AutoCAD Print / Plot :: 2004 - Set To Plot To File / How To Change

Aug 14, 2012

2004 and how to turn "plot to file" off?  Any time they go to plot the plot to file is already set and grayed out.  It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.

View 2 Replies View Related

AutoCAD Print / Plot :: Apply New Page Setup To Multiple Layouts?

Nov 3, 2011

Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.

The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.

If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?

View 2 Replies View Related

AutoCAD Print / Plot :: Assigning A Page Setup To Multiple Layouts?

Jul 22, 2011

I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.

View 1 Replies View Related

AutoCAD Print / Plot :: Change Page Setup In All Layout Tabs

Nov 8, 2003

I get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?

View 5 Replies View Related

AutoCAD 2013 :: Get Batch Plot To Plot PDFs To Single File

Sep 30, 2013

I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!

i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now. 

View 1 Replies View Related

AutoCad :: Plot To PDF With Batch Plot Or Export Drawing To PDF

Mar 17, 2011

AutoCAD 2011 - XP - 2 Machine office

When I use the pdf plot drivers from AutoCAD or the export to pdf option the resulting pdf is not available to the other computer trying to access it through a shared folder.

When I plot to pdf with batch plot or export the drawing to pdf and save the file in the shared folder, the other computer can not open the pdf (file not found) or attach the file to an email (you do not have permission)

Why is this? All other files share and open fine. Only pdf files from batch plot, plot to dwg to pc3, or export to pdf. This is a pain and I still have to use another plot driver (cutepdf) to get a fully useable pdf for our office.

View 1 Replies View Related

AutoCAD Print / Plot :: Print / Plot Preview Shows Section Of Drawing

Jan 20, 2012

I'm using autocad 2000 and I have a problem printing & plotting.  The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.

View 3 Replies View Related

AutoCAD Print / Plot :: Mac Doesn't Allow For Proper Printing On Their Plot Style Setting

Aug 29, 2013

I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting. 

I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?

View 2 Replies View Related

AutoCAD Print / Plot :: Sharing Plot Files 64bit With 32bit Machine?

Aug 21, 2012

Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?

View 1 Replies View Related

AutoCAD Print / Plot :: Publish To DWFx Plot Stamp Layer

Aug 29, 2011

When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.

Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc

Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional

Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports.  It has at least one entity per layout

Is there anyway to rectify this and still use the built-in Plot Stamp?

View 2 Replies View Related

AutoCAD Print / Plot :: 2007 Not Reading Plot Styles Correctly

Jan 17, 2012

So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.

When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.

There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.

View 1 Replies View Related

AutoCAD Print / Plot :: Plot Results From Paperspace Are Different From Model Space?

Jan 17, 2013

I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.

Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.

I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?

View 3 Replies View Related

AutoCAD Print / Plot :: Publish Vs Plot - Image Shifts And Border Cut Off

Aug 13, 2012

I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.

This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?

View 1 Replies View Related

AutoCAD Print / Plot :: Poor Plot Quality With Aerial In 2012?

Aug 8, 2012

I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated.  I am using very high resolution aerial imagery.  The output is not at all high resolution (totally pixelated, not presentable as professional).   It seems like AutoCAD is reducing the image quality now.  Is this a system variable that can be adjusted? 

View 1 Replies View Related

AutoCAD Print / Plot :: KIP 3100 With 2011 Heidi Driver Crashes Upon Plot Preview

Sep 1, 2011

AutoCAD Architecture 2011
Windows 7 x64
8GB RAM

Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.

This causes a crash report which has been submitted to Autodesk.  The response was to install service pack 2.  Error still occurs after installing the service pack.

Using the non-AutoCAD driver works.

View 1 Replies View Related

AutoCAD Print / Plot :: Cannot Choose Plotter In Plot Manager

Jun 25, 2013

In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".

The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.

I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."

[URL]

View 2 Replies View Related

AutoCAD Print / Plot :: DWG To PDF - Lines Plot As Gray Instead Of Black?

May 9, 2011

Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.

I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines. 

Here is some background info.  My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings.  Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration.  I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.

When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color.  All my lineweights in the layers property manager are set to default.  I have attached a blank drawing that is based off of my template.

View 1 Replies View Related

AutoCAD Print / Plot :: Application Terminates When Plot Command Is Given

Apr 27, 2012

I'm using autocad 2011 LT License version 5 users & autocad 2012 Lt License Version 5 users.I have got a HP Laserjet 5200 printer, when i give a plot command from one of the workstation having autocad 2012 lt

the application gets terminated automatically every time.This issue is only with a single client having 2012LT all other autocad LT 2012 workstations in the same network plots w/o any complaint.

View 2 Replies View Related

AutoCAD Print / Plot :: Layers Turned Off Plot Unless They Are Frozen?

Sep 13, 2013

I have a user which we just installed Autocad Civil 3D 2014 on his computer that is running on a Windows 7 64-bit OS.  However, he has had the same problem with Civil 3D 2011, 2012, and 2013 ever since we took him to 2011 in September 2011.  So, it is not something new.  It may have been around before then but my companies common practice back then was to freeze layers with a script file before plotting.  While attending a class back in 2010 or 2011, he and his group were told to “do not use FREEZE on layers in Civil 3D” since things frozen did not get updated like they would if they were just turned off.  So, they have been using the “ON/OFF” commands on all Civil 3D files since then.

Here is the problem:

A drawing, typical of this and other jobs he does, has a title block which is an xref in paper space and the site plan xref in model space.  He can turn "OFF" certain layers from the site plan as viewed from paper space to remove clutter and then go to make a plot.  After getting it set up to print and going to the preview the layers he has turned off appear in the preview and if he goes ahead and makes the plot or PDF those layers that were turned off will plot out.

The work-a-round they have been using ever since has been to go back into the file(s) and “FREEZE” the layers that were turned off, make the plots and then go back and “THAW” the layers before ending the drawing.

Things we have tried:

Set Visretain=1
Used the “Publish” command.
Set Layerevalctl=0 or 1

Is there a way to use ON/OFF instead and have the layers NOT plot out?  OR, is this something that AutoCAD will not do regardless?  Has it always been that way and we have been unaware of it through the past four releases?

View 5 Replies View Related

AutoCAD Print / Plot :: Delay In Plot Manager Window

Feb 18, 2013

I have a network with Windows XP and Windows 7.

Printers: from HP 5000 series to a KIP 3000.
CAD,from 2008 to 2012 versions.ALL of the PCs are having this strange behaviour:Open a drawing, Press File then Plot and..

Scenario 1: if the KIP3000 is online then plotting window comes in few seconds, a normal, decent delay!
Scenario 2: if the KIP 3000 is offline then plotting can be delayed to minutes!!!

Downloaded the drivers from KIP web site, installed and tested, prints fine once the above issue with delay is sorted! I’m guessing that is something built-in CAD, pre-emptive, background checks running for printers status when you attempt to plot to the printer / plotter !

View 3 Replies View Related

AutoCAD Print / Plot :: How To Adjust Grayscale In 3D Model Plot

Sep 28, 2011

I need to plot a drawing with a few plans, which are in 2D but also a 3D model of the intire installation and a few side views, which are side views of the 3D model.When I plot the drawing I am able to get the side views in black and white by taking the following steps:(i got these steps from this post: URL....

- set the visual style (in model space) to hidden or wireframe.
- in the layout you select a viewport that conntains a 3D visualisation and double click in that window to set the visual style to 2D wireframe and also set the viewports shade plot to hidden.

because the plotter is black and white only I see those side views in different shades of grey but the problem is that the difference in grey isn't clear enough (and yellow pipes are hardly visible) and I can't adjust these. When adjusting the .ctb it only affects the 2D views and not the 3D views.

It is possible to change the greyness by changing the color of the diffent pipes that are in the drawing but this is not a desired option by the client.how to alter the shades of grey in 3D visualisations so that not all pipelines look the same .I attached a file of what the plot preview looks like and another of what the actual plot looks like

View 2 Replies View Related

AutoCAD Print / Plot :: Pixelated Plot Of PDF In File When Printing To PDF

Apr 8, 2010

I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.

I have attached an image with 4 zoomed-in screen shots to show what I'm describing.

View 6 Replies View Related

AutoCAD Print / Plot :: 3D Drawing Won't Plot In Black And White Using CTB

Nov 21, 2011

We do most of our drawing in 2D – quaint I know, but that’s the way the office works.  On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.

The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.

The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.

View 4 Replies View Related

AutoCAD Print / Plot :: Apply Plot Styles To Drawing

Apr 15, 2013

Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?

View 4 Replies View Related

AutoCAD Print / Plot :: Can't Plot To HP Officejet Pro K8600 From 2007

Jan 5, 2012

I can't plot to my HP 8600 from Acad 2007, the plotter lights blink an error and nothing plots.  I can save the dwg as a PDF and print the PDF to it fine.  Is there a special plot driver for the 8600 or what am I doing wrong?

View 5 Replies View Related

AutoCAD Print / Plot :: Arabic Fonts Jumbled After Plot

Feb 21, 2011

Arabic Fonts Jumbled in Autocad. When i see in autocad it look very clear, when i see preview also, it is very clear.When i plot drawing, it is coming Fonts Jumbled.

View 5 Replies View Related

AutoCAD Print / Plot :: Plotting To PDF Drawings Disappear When Go To Plot

May 25, 2011

So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved