AutoCAD Print / Plot :: Printing To PDF To Printer Transparency
Dec 18, 2013
When I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
View 1 Replies
ADVERTISEMENT
Dec 9, 2011
I have a HP DesignJet 110 nr connected as a network printer. I have all the drivers updated including the network card. I have unistalled and reinstalled all the drivers and software. I have also replaced the ink cart. too. When I print in AutoCAD 2011 it acts like it is printing stuff, but it goes throught the whole process and nothing prints. I just started creating PDFs and sending them to the printer, but thought I would give it a new shot.
View 5 Replies
View Related
Aug 17, 2011
I have Windows 7 workstation 64 bit.
I am trying to configure a networked printer using a PS driver. I am not able to print floor plans full page. It is only printing 1/4 of the plans.
configuring the device? The device is a Canon IRC5185.
I do have an HP print locally and it works perfectly fine.
View 1 Replies
View Related
Oct 3, 2011
I tried printing a plan with my printer and for some reason it wont print in portrait mode, no matter how much i change the settings it does not change the page orientation, the preview also shows it to be in landscape mode
View 3 Replies
View Related
Jun 13, 2013
I have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
View 2 Replies
View Related
Jun 28, 2012
Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.
Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish
Result - only active dwg prints
View 1 Replies
View Related
Oct 14, 2012
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
View 3 Replies
View Related
Aug 18, 2013
Can't plot correctly to pdf with transparency hatch. I have several draws with hatch transparency, but when plot do pdf and use dwg to pdf.plot the hatch it´s wrong. See the draws in attachments.
I try to plot to dwf and after plot to pdf use a third part plot pdf like pdf995, arcplot, and others, but the problem its the same.
I use autocad 2012 but the problem it´s the same if I change to 2013 or 2014.
View 3 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Apr 8, 2010
I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
View 6 Replies
View Related
Apr 2, 2012
When I try printing, autocad gives me the following message (see attached pic). I deleted that driver out of system preferences. Yet it sitll keeps looking for it. I get the spinning rainbow for about 5 minutes, the the print dialogue eventaully comes up. I can print, but that takes over 5 minutes as well. Seems like autocad gets stuck in a loop looking for a driver or something. How do I fix this. Printing a single pages takes me about 10 minutes. Do anything within the page setup manager results in a spinning icon for a few minutes as well.
View 9 Replies
View Related
Aug 3, 2012
My company will be getting a new large format printer to replace the current one we have. We don't have room enough to have both running at the same time so I'm imagining one-day down then viola, we have a new printer.
How I can prepare for this as far as creating the necessary Plot Styles, pc3, pmp...files? Because i have many items on my to-do list, this could take a day or two with all the testing and i can't image the uproar from our CADers about going without a plotter for two or three days.
View 1 Replies
View Related
Oct 2, 2012
I have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page.
View 1 Replies
View Related
Jan 12, 2011
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
View 2 Replies
View Related
Apr 23, 2012
AutoCAD 2013 crashes during the plot configuration for our printer. When I select Custom Properties for our Kip 5000 Series Printer I get an Unhandled Exception popup. When I click continue I get a message that "AutoCAD Applicaiton has encountered a problem and needs to close", the program crashes. AutoCAD 2013 will not let us select the kip 5000.pc3 file we used for Autocad 2012.
How can I set my printer up if it keeps crashing the program. Is there a new driver for 2013, if so where do I find it. Is it from AutoCad or the printer company Kip America (who have yet to reply to my email).
I have attached the error message
View 4 Replies
View Related
Sep 4, 2013
I am trying to plot somelthing with a transparent hatch. I set the hatch to transparent, shows up fine in model space. I go to plot (either to paper or pdf doesn't matter) in the plot setting I check "Plot Transparency" print preview shows everything fine. When I print I get a blank page.
View 5 Replies
View Related
Jan 8, 2014
Trying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
View 2 Replies
View Related
Oct 30, 2012
When printing to PDF via the DWG to PDF.pc3, I am getting a blank PDF. When i hit preview everything shows fine, but when I print it all disappears. The layers list shows in the PDF on the right, but turning them on and off does nothing.
View 3 Replies
View Related
Oct 30, 2010
I'm using ACAD2011 and a HP DesignJet 500 plotter. We use PDF underlays of scanned charts, maps, etc in our cad plans and sometimes the PDFs will only partially plots even though the rest of the cad line work plots. We are using 2007 dwg file format to make files compatible with another program. I have monkeyed with the RASTERPERCENT and RASTERTHRESHHOLD variables but still same problem.
View 3 Replies
View Related
Mar 5, 2013
DWG to PDF is not printing certain files correctly. It appears to only happen with the dots hatch pattern and the Dots linetype with a 0.0003" lineweight in the CTB file. The lines with the issue have color and pline width (zero). Print preview show, plotting to a printer, and using adobe show the lineweight correctly but using DWG to PDF does not.
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 8 Replies
View Related
Dec 4, 2012
i used the page setup and creat new setup to print some area ..
ist possible to make a setup to print multi area .. - when i creat new one it ask to select what i want to print , but it just ask once ,if i want to print other thing i need to creat new setup ...
what i need is to selcect multi time .
View 1 Replies
View Related
Apr 24, 2012
When batch plotting using an external plot utility from Model Space, I get pages with different placements on the paper, the issue appears to be that some sheets are selected for Center the Plot and some are not. Even though my plot utility has a selection for Center Plot, it won't override what is already in the page for this one option. Is there a line command I can run in a script that would allow me to set the plot to center without having to open each sheet and reset this manually?
View 3 Replies
View Related
Sep 23, 2011
I have a rather bizarre issue within AutoCad when printing.
This is affecting multiple people, using various machines (all the same model). It is happening when they print to multiple printers, and also when they print to PDF.
They are losing some information. The drawings themselves usually look ok, it is some of the extra data. This can be in the footnote information in the corner. This can be data within the actual drawing. It is not a guaranteed fault, and affects them all intermittently.
View 2 Replies
View Related
Jul 27, 2006
How to plot PDF format drawing to Xerox 8830 plotter which the drawing have a jpg logo will change to a black fill?
View 9 Replies
View Related
Apr 15, 2013
I have PDF files created in AutoCad Arch 2010. When I print them some of the grayscale comes out as random zig-zag line pattern. When I veiw the PDF it looks fine. Images that do this are usually backgrounds of logos or shaded driveways / sidewalks. Some sheets out of a given set will print fine while others do this zig-zag thing?
View 2 Replies
View Related
Jan 31, 2013
I dont know whats going on, but all of a sudden all the prints i do to PDF have a washed out faded look about them.Now all those lines are on the same layer, set to print with the same pen thickness, so why does one appear bold and one hardly visible at all?
View 9 Replies
View Related
Dec 12, 2011
I am having trouble printing "smooth" circles. I am using Cad2012 for Mac. I have setup the shademode to 2D-wireframe, viewres to 5000 and still cannot seem to get smooth circles.
When I print form a PC, the problem is gone...
View 1 Replies
View Related
Oct 28, 2013
I having difficulty batch printing using Scriptpro 2.0. In short, scriptpro is using the simple batch file (see below), to add a xref and then printing using the DWG to PDF driver. I have tried using a paper printer, which works fine, so I suspect the problem is when scrippro calls the DWG to PDF driver.
I am using accoreconsole.exe application.
I inserted a "qsave" command after the xref is inserted, and the xref does get saved, so, I know the script is working up to that point.
Batch.scr
Filedia
0
Proxynotice
0
Frame
1
Frame
[code]...
View 9 Replies
View Related
Jan 11, 2013
I have a problem when I print documents regardless of the printer I use.
If the document is on the network, colors are printing in black.
But if I copy this document locally on my computer, colors are printing normally.
Note : I'm using AutoCAD 2012 LT
View 7 Replies
View Related
Apr 10, 2006
Is is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies
View Related
Aug 29, 2013
My screens show solid dimension numbers and arrows but when I print they appear as hollow. I can't find what setting this is or if it is a print setting.
View 3 Replies
View Related
