I am trying to plot somelthing with a transparent hatch. I set the hatch to transparent, shows up fine in model space. I go to plot (either to paper or pdf doesn't matter) in the plot setting I check "Plot Transparency" print preview shows everything fine. When I print I get a blank page.
View 5 RepliesWhen I plot to pdf with Transparency on it takes a long time and only creates a blank page. This happens when I give my hatch a transparency in the Properties Dialog box and plot it.
View 1 Replies View RelatedCan't plot correctly to pdf with transparency hatch. I have several draws with hatch transparency, but when plot do pdf and use dwg to pdf.plot the hatch it´s wrong. See the draws in attachments.
I try to plot to dwf and after plot to pdf use a third part plot pdf like pdf995, arcplot, and others, but the problem its the same.
I use autocad 2012 but the problem it´s the same if I change to 2013 or 2014.
Excuse my awkwardness but I'm self taught on AutoCAD & have managed fine for last few months but have encountered an issue this evening I can't resolve. I've produced drawings, basic they may be, but when preview them the actual drawing area is barely noticable & when export to pdf it practically prints a blank page. I have very simple items in drawing, stockpiles, excavations test locations, and have been producing pdf's fine, even as recently as this morning using the same cadfile. But what ever I've managed to do since then has changed something and I can't resolve the issue.
View 6 Replies View RelatedWhen i attempt to plot some layouts to adobe pdf, they are coming out with sections that are blank. They are scattered around the drawing but the drawing content is missing. when i use the built in pdf creator, it is shifting some things around to where they don't belong and i can't have that!
View 1 Replies View RelatedUsing ACAD 2008, I am having an odd problem where when I print preview/plot this drawing with a viewport the result is a blank page but when I remove the viewport it plots fine.
View 0 Replies View RelatedI am running CAD Map 3D 2011 and a Windows XP SP3 machine with 4GB RAM and a 128 MB 3D card. I am trying to send the plot to a HP Designjet 800PS plotter.
The file that I am working on is not overly large and has no raster images or OLE objects attached. It does have several open database connections that I am using to theme one of my drawing layers. The sheet itself is an odd size (36" x 54"), but I have printed other drawings of this size before and I've never had problems.
When I first plotted the sheet, it was taking forever to spool, so I ended up canceling the print several times. I finally decided to try to plot to PDF, but this created a HUGE spool file (2.65 GB). Since it was actually spooling, I went ahead and let it run. It ended up taking about an hour to spool and print the PDF. Before I opened the PDF, I checked the size and found it to be about 12 Mb. When I opened it, all that was there was a blank sheet. After that, I re-sent the plot to the HP plotter and just let it work overnight. When I got in this morning, there was a 36" x 54" blank sheet waiting for me.
I've checked the basic settings and none of the layers are frozen, off, or set to not print. I also increased by page file size to work with the plot, but that does not seem to have had any effect. I've tried creating several different .pc3 files, but the issue has stayed. I am now trying to have another person open the file and print it from a different workstation, but so far no luck.
As a side note, I tried a work around by plotting to a dwf file using the included dwf driver. This spooled and plotted very quickly (<60 seconds) and the dwf file appears just fine in design review. However, when I try to print from design review, it won't let me set it as a 36" x 54" plot; it keeps with with the standard print sizes only.
Following instructions from Autodesk as to how to install the Raster driver for image exports I installed "plotters" for JPEG, TIFF, BMP and PNG. None of them work. When I try to one of them, the result is a blank file about 39KB in size.
View 1 Replies View RelatedWhen I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
Trying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
View 2 Replies View RelatedI was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
View 14 Replies View RelatedI have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View Relatedhow to create page setups for multiple printers in a network environment?
Here is the problem:
We have 2 offices with 3-7 printers per office and each printer with different capabilities (black and white, color, 11x17, wide format, etc.). I have CAD users who know little about setting up layouts so I want to create preconfigured layouts that they can import from a template via Design Center or other means.
I know I could set up a layout for each printer, page size, plot scale, and plot style table, but that gets to be so many layout permutations that it becomes overwhelming to manage and use. Up until now I had set up PC3 files for a few commonly used printers (wide format plotter, laser, pdf) and gave them generic names with the intent that I could simply direct the output to any printer by assigning it to one of the generic PC3 files. The problem I've encountered is that over time we've acquired new printers and old printers sometimes go offline or out of service and many of the printers have incompatible printable areas and page sizes to each other, so for example a page setup that calls for an 11x17 sheet for one printer does not have an equivalent size when a different printer is assigned to the layout.
Are we stuck with having to configure setups for each and every printer and permutation?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.
View 1 Replies View RelatedI get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies View RelatedCopied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
I use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies View RelatedWe have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
View 2 Replies View Relatedat work we use custom paper sizes. We use HP Designjet 500 ploter and paper rolls of sizes 420, 610 and 910 mm. So I have made layout for all sizes: 410x 420, 600x610 and 900x910 mm. To share files between computers we use TortoiseSVN. But leaving for long time all sizes gets bad (page_ setup_ manager. png). Size from 410x420 becomes 409,96x419,95 mm. The same becomes in plot window too (plot.png). And to plot in right paper sizes we need to edit plot paper size again if not drawing is ploted in bad paper size (custom_paper_size.png). Is here a way to permanently bind good paper size to drawing?
View 6 Replies View RelatedI'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedWhen I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.