Copied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies View RelatedI am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
I have all of our .pc3 files on a server, and have created them in the order I would like to see them, however they come in a random order. I have moved them out of the folder, and back in the order I want with no luck. I tried renaming them with numbers in front, and then with letters in front to try and populate the list in a certain order. I only have 16 .pc3 files and MAXSORT is default at 6000.
We are using page setups as well which are not a problem, but the occasional time we need to print to a specific .pc3 file gets annoying having to sort through the list to find the one we want.
Just installed 2012 from 2000. Plot style table (file copied from old installation) has all colors set to grayscale=off but is printing with grayscale.
View 9 Replies View RelatedI have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
I am trying to plot somelthing with a transparent hatch. I set the hatch to transparent, shows up fine in model space. I go to plot (either to paper or pdf doesn't matter) in the plot setting I check "Plot Transparency" print preview shows everything fine. When I print I get a blank page.
View 5 Replies View RelatedWhen I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View Relatedhow to create page setups for multiple printers in a network environment?
Here is the problem:
We have 2 offices with 3-7 printers per office and each printer with different capabilities (black and white, color, 11x17, wide format, etc.). I have CAD users who know little about setting up layouts so I want to create preconfigured layouts that they can import from a template via Design Center or other means.
I know I could set up a layout for each printer, page size, plot scale, and plot style table, but that gets to be so many layout permutations that it becomes overwhelming to manage and use. Up until now I had set up PC3 files for a few commonly used printers (wide format plotter, laser, pdf) and gave them generic names with the intent that I could simply direct the output to any printer by assigning it to one of the generic PC3 files. The problem I've encountered is that over time we've acquired new printers and old printers sometimes go offline or out of service and many of the printers have incompatible printable areas and page sizes to each other, so for example a page setup that calls for an 11x17 sheet for one printer does not have an equivalent size when a different printer is assigned to the layout.
Are we stuck with having to configure setups for each and every printer and permutation?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Looks like the format is not forwarded correctly to the printer when printing A3, it comes out as A4. If we change paper format in printer properties to A3 it works fine.
View 3 Replies View RelatedOkay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.
View 1 Replies View RelatedI get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies View RelatedBefore upgrading to 2012 from 2010 (against our will), our publishing tool worked seamlessly with our XEROX 6604. Now, strangely only one user out of seven has the ability to publish a set of drawings without crashing AutoCAD. We are happy that it works on his machine, but it seems very odd that the rest of us are affected when our PCs are the same spec and setup.
All of the proper drivers and firmware are up to date.
On PC_71, While ploting(creating the pdf via autocad) the pdf,its everytime coming in portait format but we want in landscape format.
On PC_71, if we create the pdf of any document by our Adobe pdf printer PRT13 then its creating pdf properly for both portait and landscape format . But for any autocad drawing file , the pdf printer PRT13 is not creating in landscape format.
I also cross-checked all plot setting with other proper working PC , its same then also its behave differently.
And if we create pdf on any other PC then its creating the pdf properly for any drawing but not on PC_71.
Also 1 more typical point I noticed that if we delete any pdf file from PC_71, then after refreshing its again appeared on same location.
Note - We are using:
Software : Autocad 2012-64Bit , Naviswork 2013 , Inventor Ultimate 2014-64 Bit , Bentley Autoplant V8i - SS4 version : 8.11.9.140 ,MS-Office 2010 - 64 Bit.
Hardware : Workstation Dell Precision T3600
I use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies View Relatederror messages that say I can't use various functions because the file has objects from a newer version. I have ACA 2012 and the file is from ACA 2013.
Isn't there a way to convert or eliminate these 'objects' so I can use these files 'normally' in 2012 ACA?
We have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
View 2 Replies View RelatedI am trying to print a version of a letter head and footer on a A4 page. I sent the file directly from Illustrator CC to a desktop laser printer. On the screen looks all right but printed version has footer moved all the way up just under the header.
How to prevent the layout changes?
(BTW: My printer settings and Illustrator settings: Do Not Scale, Print Actual File Size)
I am using the Autocad 2013 educational version. I have a drawing with a .ctb file. When i print, it is printing with the lines in colour. I would like the lines to print in black or grey. I assume I need to change the plotstyle to a monochrome.ctb plot style, but cannot work out how to change the plot style.
Is the plot style changed in the model or paper space of the drawing, or in the print menu?
- I have looked extensively under File/ print and can find nowhere to change a plot style.
- under File/ plot styles I can select from a list of .ctb files - but it only allows me to edit them - not apply them to the drawing.
- In the drawing under the properties inspector i can see a plot style menu and it is currently showing the option ' bycolour' when I click on the pull down options menu, there are no other options. There is also a 'plot table type; but it says this is ' not available'
-When i type plot styles in the drawing it brings up a bring s up an edit plotstyle table window, and this has a pull down menu that displays arrange of plot styles , but when I select one it only allows me to edit the plot style table and save and close. It does not actually apply it to the drawing.
I have always been able to print (FIT TO PAGE) 8.5 X 11 (LETTER SIZE) PHOTOS in PREVIOUS VERSIONS OF PHOTOSHOP ELEMENTS! I recently downloaded version 10 and it will not print full page photos. How to achieve printing full size page photos with no white borders around the photo in version 10!
View 1 Replies View RelatedI am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.
View 2 Replies View RelatedI'm trying to print a 2D drawing but I would like to add the 3D solid for viewing reference. I can't seem to "flip/rotate" my 3D solid to obtain an isometric view while looking at my 2D drawing from the top view.
how I can get both items to print on a single plot?
i am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies View RelatedI'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
I cannot get my program to print to any of our network printers. I am using Autocad 2013 LT with FusionWare and Windows 7 on a Macpro OSX Lion. This started being a problem a few weeks ago and the only way I can get anything printed is to make a pdf and and then print the pdf from Acrobat.
Today I brought in a HP 940c printer from home and connected it to my desktop printer. I spent an hour uninstalling and installing the drivers. I can now print from Acrobat on both the PC and Mac sides of the computer, but when I try it from Autocad I get Error_Printing in the HP printer window. No info as to what the error might be. I tried this several times, tried renaming the file with a shorter name but since the driver puts in the entire path that was a futile gesture.
So I have confirmed that the printer is functioning correctly, just not with Autocad. I realize that i do have a working workaround but it is tedius and unnecessay to keep making all those pdfs.
I have C3D 2010, 2011, and 2013 installed on my pc. I use the Publish command almost daily, and haven't had any serious issues with it when using 2010 or 2011. But in 2013, when I publish it just sits on the same screen and never actually publishes. I have tried turning off Publish in Background, I have checked that the printer support paths are the same as in 2010 and 2011, and I have tried Publish with different Page Setups.
View 3 Replies View RelatedI am facing this problem that when i give plot command and preview the window it show fonts different other than my main window. Also it prints as per the preview window and not as per the fonts present in my AutoCAD model space and layout.
View 1 Replies View Related