AutoCAD Print / Plot :: 2012 PC3 List Order
Mar 28, 2012
I have all of our .pc3 files on a server, and have created them in the order I would like to see them, however they come in a random order. I have moved them out of the folder, and back in the order I want with no luck. I tried renaming them with numbers in front, and then with letters in front to try and populate the list in a certain order. I only have 16 .pc3 files and MAXSORT is default at 6000.
We are using page setups as well which are not a problem, but the occasional time we need to print to a specific .pc3 file gets annoying having to sort through the list to find the one we want.
View 4 Replies
ADVERTISEMENT
Aug 8, 2012
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies
View Related
Oct 14, 2011
I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
View 8 Replies
View Related
Feb 27, 2012
I'm using LT2010, my layer list in LT is alphabetical but when I create a pdf- the pdf layer list is not alphabetical. Is there a way to correct his so that the PDF layer list is also alphabetical?
View 9 Replies
View Related
Jun 21, 2011
Just installed 2012 from 2000. Plot style table (file copied from old installation) has all colors set to grayscale=off but is printing with grayscale.
View 9 Replies
View Related
Nov 6, 2013
Looks like the format is not forwarded correctly to the printer when printing A3, it comes out as A4. If we change paper format in printer properties to A3 it works fine.
View 3 Replies
View Related
Oct 14, 2011
Before upgrading to 2012 from 2010 (against our will), our publishing tool worked seamlessly with our XEROX 6604. Now, strangely only one user out of seven has the ability to publish a set of drawings without crashing AutoCAD. We are happy that it works on his machine, but it seems very odd that the rest of us are affected when our PCs are the same spec and setup.
All of the proper drivers and firmware are up to date.
View 1 Replies
View Related
Jan 1, 2014
On PC_71, While ploting(creating the pdf via autocad) the pdf,its everytime coming in portait format but we want in landscape format.
On PC_71, if we create the pdf of any document by our Adobe pdf printer PRT13 then its creating pdf properly for both portait and landscape format . But for any autocad drawing file , the pdf printer PRT13 is not creating in landscape format.
I also cross-checked all plot setting with other proper working PC , its same then also its behave differently.
And if we create pdf on any other PC then its creating the pdf properly for any drawing but not on PC_71.
Also 1 more typical point I noticed that if we delete any pdf file from PC_71, then after refreshing its again appeared on same location.
Note - We are using:
Software : Autocad 2012-64Bit , Naviswork 2013 , Inventor Ultimate 2014-64 Bit , Bentley Autoplant V8i - SS4 version : 8.11.9.140 ,MS-Office 2010 - 64 Bit.
Hardware : Workstation Dell Precision T3600
View 2 Replies
View Related
Sep 24, 2013
Copied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
View 3 Replies
View Related
Dec 12, 2012
When we publish we are always asked if we wish to save the current list of sheets.
See attached screenshot.
One of my users no longer gets this option.
Every time he publishes the program goes directly to the Save List As dialog box so he can name/save a .DSD file. He no longer gets the option of a box asking him if he wants to save the current list of sheets.
My guess is some variable got changed that has removed the option of being prompted about saving the .DSD file.
P.S. We're using AutoCAD 2012.
View 6 Replies
View Related
Oct 5, 2011
I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
View 7 Replies
View Related
Jan 20, 2012
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies
View Related
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Aug 21, 2012
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies
View Related
Aug 29, 2011
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
View 2 Replies
View Related
Jan 17, 2012
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
View 1 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related
Sep 1, 2011
AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
View 1 Replies
View Related
Jun 25, 2013
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
View 2 Replies
View Related
May 9, 2011
Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
View 1 Replies
View Related
Aug 14, 2012
2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies
View Related
Apr 27, 2012
I'm using autocad 2011 LT License version 5 users & autocad 2012 Lt License Version 5 users.I have got a HP Laserjet 5200 printer, when i give a plot command from one of the workstation having autocad 2012 lt
the application gets terminated automatically every time.This issue is only with a single client having 2012LT all other autocad LT 2012 workstations in the same network plots w/o any complaint.
View 2 Replies
View Related
Sep 13, 2013
I have a user which we just installed Autocad Civil 3D 2014 on his computer that is running on a Windows 7 64-bit OS. However, he has had the same problem with Civil 3D 2011, 2012, and 2013 ever since we took him to 2011 in September 2011. So, it is not something new. It may have been around before then but my companies common practice back then was to freeze layers with a script file before plotting. While attending a class back in 2010 or 2011, he and his group were told to “do not use FREEZE on layers in Civil 3D” since things frozen did not get updated like they would if they were just turned off. So, they have been using the “ON/OFF” commands on all Civil 3D files since then.
Here is the problem:
A drawing, typical of this and other jobs he does, has a title block which is an xref in paper space and the site plan xref in model space. He can turn "OFF" certain layers from the site plan as viewed from paper space to remove clutter and then go to make a plot. After getting it set up to print and going to the preview the layers he has turned off appear in the preview and if he goes ahead and makes the plot or PDF those layers that were turned off will plot out.
The work-a-round they have been using ever since has been to go back into the file(s) and “FREEZE” the layers that were turned off, make the plots and then go back and “THAW” the layers before ending the drawing.
Things we have tried:
Set Visretain=1
Used the “Publish” command.
Set Layerevalctl=0 or 1
Is there a way to use ON/OFF instead and have the layers NOT plot out? OR, is this something that AutoCAD will not do regardless? Has it always been that way and we have been unaware of it through the past four releases?
View 5 Replies
View Related
Feb 18, 2013
I have a network with Windows XP and Windows 7.
Printers: from HP 5000 series to a KIP 3000.
CAD,from 2008 to 2012 versions.ALL of the PCs are having this strange behaviour:Open a drawing, Press File then Plot and..
Scenario 1: if the KIP3000 is online then plotting window comes in few seconds, a normal, decent delay!
Scenario 2: if the KIP 3000 is offline then plotting can be delayed to minutes!!!
Downloaded the drivers from KIP web site, installed and tested, prints fine once the above issue with delay is sorted! I’m guessing that is something built-in CAD, pre-emptive, background checks running for printers status when you attempt to plot to the printer / plotter !
View 3 Replies
View Related
Sep 28, 2011
I need to plot a drawing with a few plans, which are in 2D but also a 3D model of the intire installation and a few side views, which are side views of the 3D model.When I plot the drawing I am able to get the side views in black and white by taking the following steps:(i got these steps from this post: URL....
- set the visual style (in model space) to hidden or wireframe.
- in the layout you select a viewport that conntains a 3D visualisation and double click in that window to set the visual style to 2D wireframe and also set the viewports shade plot to hidden.
because the plotter is black and white only I see those side views in different shades of grey but the problem is that the difference in grey isn't clear enough (and yellow pipes are hardly visible) and I can't adjust these. When adjusting the .ctb it only affects the 2D views and not the 3D views.
It is possible to change the greyness by changing the color of the diffent pipes that are in the drawing but this is not a desired option by the client.how to alter the shades of grey in 3D visualisations so that not all pipelines look the same .I attached a file of what the plot preview looks like and another of what the actual plot looks like
View 2 Replies
View Related
Apr 8, 2010
I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
View 6 Replies
View Related
Nov 21, 2011
We do most of our drawing in 2D – quaint I know, but that’s the way the office works. On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.
The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.
The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.
View 4 Replies
View Related
Apr 15, 2013
Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies
View Related
Jan 5, 2012
I can't plot to my HP 8600 from Acad 2007, the plotter lights blink an error and nothing plots. I can save the dwg as a PDF and print the PDF to it fine. Is there a special plot driver for the 8600 or what am I doing wrong?
View 5 Replies
View Related
