AutoCAD Print / Plot :: PUBLISH - No Longer Asked About Saving Current List Of Sheets?
Dec 12, 2012
When we publish we are always asked if we wish to save the current list of sheets.
See attached screenshot.
One of my users no longer gets this option.
Every time he publishes the program goes directly to the Save List As dialog box so he can name/save a .DSD file. He no longer gets the option of a box asking him if he wants to save the current list of sheets.
My guess is some variable got changed that has removed the option of being prompted about saving the .DSD file.
P.S. We're using AutoCAD 2012.
View 6 Replies
ADVERTISEMENT
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Sep 29, 2011
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies
View Related
May 9, 2013
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
View 1 Replies
View Related
Feb 15, 2011
I want to export a dwg to pdf. It appears to do it, but doesn't. Keep getting
"ERROR: There were no plot table sheets in the current operation."
View 9 Replies
View Related
Jun 16, 2011
We are running Civil 3d which we jumed from Land Desktop 2004 (I know, wow). I cant figure out why I cant bulk plot my tabbedd sheets like I could in previous versions. I can PUBLISH in bulk, but not PLOT.
Am I missing something here?
View 5 Replies
View Related
Aug 29, 2011
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
View 2 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related
Jun 28, 2012
Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.
Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish
Result - only active dwg prints
View 1 Replies
View Related
Aug 7, 2013
How to turn plot and publish log file off? (see attached pic)
I found out how to turn the one off under plot stamp settings, but I would like this box to be unchecked also and I want to do it automatically for all my users.
[URL]....
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
View 6 Replies
View Related
Sep 21, 2011
We use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
View 6 Replies
View Related
Jun 13, 2011
The Pagesetup isn't showing up in the Pagesetup dialog.
But when I close the drawing and open it up it's visible.
What am I missing here? Still new with this transaction concept...
<CommandMethod("aps")> _Public Sub AddPlotSetting() 'TODO: Finish Cleaning Print Function Dim s_PlotSettingsFile As String = "c: est.dwg Dim s_PageSetupName As String = "catdog" Dim s_MediaName As String = "11 x 17"
[Code]....
View 7 Replies
View Related
Feb 23, 2011
I have a problem with the file name of my pdf, after i publish drawings with DWG To PDF.pc3...I used to be: "the file name of dwg drawing"
+
" - "
+
"the name of the sheet"
--> in my case:
V10.350-05 + - + A4
--> V10.350-05-A4.pdf
But now it becomes always V10_350-05-A4.pdf...how i get the underscore back to a point?
View 1 Replies
View Related
May 31, 2011
I am using Autocad 2010, and have upgraded to windows 7. When I publish to pdf using Dwg to Pdf.pc3, my options (single-sheet file, do not include layers, etc.) are ignored and I always get multi-sheet files with layer information included regardless of what options I select.
View 9 Replies
View Related
Jul 30, 2013
I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
View 3 Replies
View Related
Dec 30, 2004
We use an in-house plotstamp (not the acad plotstamp) which uses rtext to show the file path and name. It works fine under all circumstances EXCEPT when we plot using the Publish command. The output from Publish shows the file path as the C:Documents and Settings... where the acad2005 software is installed instead of the correct network drive path where the dwg files are located.
Is there a secret setting somewhere that will keep Publish from changing the rtext? If we switch from rtext to fields, would that eliminate the problem?
View 2 Replies
View Related
Dec 22, 2011
I am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies
View Related
Oct 8, 2012
One workstation out of 50+/- when we publish, does not show the drawing prefix on the sheets in the "Sheet Name" list. The attached file shows a good list but that one computer is missing the prefix and if we're attempting to publish several drawings in model space, they would all have the same name so AutoCAD will not allow it because they would all have the same name . How do i get this drawing name prefix back?
View 1 Replies
View Related
Feb 22, 2012
I'd like to start using the auto-publish feature in Autocad, however the options for the file location are pretty limited. I'd like to set it to something like the following:
../transmittals/current issue/
but the options I'm presented with is either an absolute location, or the drawing folder or subfolder.
Is there a sysvar or a registry setting I can tweak to make this behave to my liking?
View 1 Replies
View Related
Mar 29, 2012
In sheet set manager / publish / publish to PDF...
where does the program get the plot settings?
2013 Civil 3D
View 2 Replies
View Related
Nov 21, 2013
I have C3D 2010, 2011, and 2013 installed on my pc. I use the Publish command almost daily, and haven't had any serious issues with it when using 2010 or 2011. But in 2013, when I publish it just sits on the same screen and never actually publishes. I have tried turning off Publish in Background, I have checked that the printer support paths are the same as in 2010 and 2011, and I have tried Publish with different Page Setups.
View 3 Replies
View Related
Sep 20, 2011
I don't remember ever using this checkbox on the Publish dialog box but today i want to and i can't figure out how to make it work. The help file ~seems~ to say that if i select this, the contents of all open documents (layouts and/or model space) are automatically loaded.... but they don't.
I know i can pick the Add Sheets button and manually select all the drawings i have open but doesn't that defeat the purpose of this checkbox?
View 4 Replies
View Related
Feb 7, 2013
I am having trouble using the publish command when I set the plotter to a 22x34 sheet. We are able to print to an actual plotter just fine at that size, but when we try and make a pdf set at that size, it just errors out.
View 3 Replies
View Related
Dec 20, 2011
The Publish to PDF option in the Sheetset Manager which I believe is using the native/built-in AutoCAD 2012 PDF driver is creating PDF's with incomplete and inconsistent graphical content. See attached PDF examples wherein the PDF "...(CONTENT GOOD)" created via CutePDF Writer contains the desired output...
Note both PDFs were plotted with essentially the same plot settings, driver excepted...
View 4 Replies
View Related
Feb 27, 2012
I'm using LT2010, my layer list in LT is alphabetical but when I create a pdf- the pdf layer list is not alphabetical. Is there a way to correct his so that the PDF layer list is also alphabetical?
View 9 Replies
View Related
Mar 28, 2012
I have all of our .pc3 files on a server, and have created them in the order I would like to see them, however they come in a random order. I have moved them out of the folder, and back in the order I want with no luck. I tried renaming them with numbers in front, and then with letters in front to try and populate the list in a certain order. I only have 16 .pc3 files and MAXSORT is default at 6000.
We are using page setups as well which are not a problem, but the occasional time we need to print to a specific .pc3 file gets annoying having to sort through the list to find the one we want.
View 4 Replies
View Related
Jun 1, 2012
Is there a way to set the Dwg to Pdf.pc3 so that when I hit plot, it "knows" to save the pdf in the bloody folder that the source .dwg file is located....I can see how to set it to 1 single default folder in Options ( i.e. my main Clients folder) but really, how to get to to plot to the source folder..... has got to be less than 1/2 hours worth of coding....I get pretty tired of browsing/scrolling etc to where I want the pdf to end up.
View 2 Replies
View Related
Feb 1, 2012
I am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Replies
View Related
Nov 10, 2011
in acad2008 when publishing I had the option to choose model space, paper space or both to populate the publish.
Has this option been eliminated?
I only want layout tabs to populate my publish.
View 9 Replies
View Related
Jan 20, 2012
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies
View Related
Dec 31, 2013
I'm having an intermittent issue with my publish command. So far the pattern seems to be on drawings with a larger number of sheets (last one was 15, this one is 7). When I get the publish dialog box, I'll set the number of copies to however many I need but it ends up only printing one set. It doesn't happen every time. Just with these two drawings so far. They have nothing to do with each other and haven't shared any data. The only similiarity is that they're both older projects that were started some years ago on previous CAD versions.
View 7 Replies
View Related
