in acad2008 when publishing I had the option to choose model space, paper space or both to populate the publish.
Has this option been eliminated?
I only want layout tabs to populate my publish.
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
I am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Replies View RelatedI'm having an intermittent issue with my publish command. So far the pattern seems to be on drawings with a larger number of sheets (last one was 15, this one is 7). When I get the publish dialog box, I'll set the number of copies to however many I need but it ends up only printing one set. It doesn't happen every time. Just with these two drawings so far. They have nothing to do with each other and haven't shared any data. The only similiarity is that they're both older projects that were started some years ago on previous CAD versions.
View 7 Replies View RelatedWhen using the publish command to print multiple sheets from Civil 3D, it will sometimes fail to print certain objects. Usually it is a profile. Occasionally it drops some of the pipes. When we plot sheets individually it plots fine. Only C3D objects are affected, not regular ACAD objects. It only seems to be pipes and profiles. This problem is sporadic. It may be drawing specific but the sporadic nature of it makes it hard to say for sure.
The way we set up our drawings, profiles and pipes are almost always DREF's. This appears to be related. If we creat a test drawing with everything in one drawing publish works fine. If we then seperate into two drawings, DREF the data, and then publish again, the pipes disappear (from the plot not the drawing itself).
The same problem occurs on two different printers so I don't think it's driver related.
It started happening when we were on 2008. I thought maybe it was just that version. However, it seems to have gotten worse in 2009.
When we publish we are always asked if we wish to save the current list of sheets.
See attached screenshot.
One of my users no longer gets this option.
Every time he publishes the program goes directly to the Save List As dialog box so he can name/save a .DSD file. He no longer gets the option of a box asking him if he wants to save the current list of sheets.
My guess is some variable got changed that has removed the option of being prompted about saving the .DSD file.
P.S. We're using AutoCAD 2012.
There's supposed to be a way to publish a map to DWF and include attribute data from gis feature sources and joins, but I'm not able to get it to work, so perhaps I'm doing something wrong.
I have a map displaying parcels from an SDF connection and have joined it to a non-spatial SQL Server table so I can theme on ownership. The map displays exactly what I want, so now I would like to publish to DWF with attributes, but when I go to MAPDWFOPTIONS, the window doesn't present a list of attributes to select, it is simply blank. Have I missed a step someplace?
I'm using Map 2012 SP1 on WinXP SP3.
I know there is a way with iLogic/VB to do this but I'm not exactly sure how. Basically, I'd like to put the part number from the base view (view 1) of SHEET 1 into my title block. Easy enough with one sheet, but I want subsequent sheets to reference back to the part number from VIEW 1 on SHEET 1, regardless of what sheet it is on.
View 1 Replies View RelatedDon't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..
Windows 7 PRO
Autocad LT 2012
I want to publish my max models on web for customers. Now on my web site customers clicking their own product and watching its. But by this way customers only watching video file. I want to do that customer can select model, zoom to model, orbit model, search model sections. Maybe change color of model. That's question: "How can i do this? or which program do i prefer?
View 2 Replies View RelatedI have created a big and complex Revit model, in Revit 2013. It's now time for me to print the sheets - I want them in PDF and DWF. But I really have some problems doing that. When I print to PDF it takes about 20 minutes for it to print 1 drawing - and it will not be complete - elements are missing compared to the original view. Often Revit stops working - and it's the same story when I try to save a DWF.
I think the reason why I have the problem is because of the complexity of the building's geometry. Have modeled it by importing SAT. files from Rhino - to create the form. The result is great but the file is now 370 Mb. I'm trying to link the model in to a new Revit project to minimize the file, and hopefully get the drawings printed in PDF and DWF. In the the new project I can't see the sheets from the linked file though.
Is there a way to link the sheets to another procjet?
shouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
I have a drawing that is "Not Responding" when switching from a layout tab to model space by clicking the "Model" tab. I ran a recovery on the drawing and there are no errors. I can't get into model space except by clicking inside my viewport.
View 5 Replies View RelatedI am doing casting model in the inventor. i need to check the modelling wall thickness.
I tried in section analysis & drafting method but i am not satisfy on that.
How do I turn off the apply to layout button in thi window
View 4 Replies View Relatedon a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View RelatedUsing AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
I have a project with over 20 models that were all upgraded from Revit 2012 to Revit 2014. Once upgraded, I was able to reload all the Revit links and see these links in views, as I should. Later the same day, when opening a new local file, I am unable to open a view after loading a link without Revit freezing. Not crashing, but freezing... the application says "Not Responding", the memory allocation is unchanged in the Window's processes, and the journal file is no longer being written to. I thought maybe this is just taking a long time to process, but 1) it didn't take this long to open the view with the loaded link when it was first successful, and 2) I've left it for hours without change.
View 1 Replies View RelatedIs this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedI just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View RelatedBasically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedI need to import a pump model from a vendor into a model I've created in MEP 2011. I tried to open the .IAM file in AutoCAD 2013 using the Import function however I keep getting an error which says "The specified file is invalid or unsupported".
View 2 Replies View RelatedI am currently using AutoCAD Civil 3D 2010 for surveying work and have been trying to figure out how to use part of an existing survey of land model. I have it in a layout (paper space) and used a viewport to get the section I am after but there are some changes in labeling and minor model modifications needed to make it a stand alone model and I do not want to modify the original model to make these changes. How can I take a section like I have in view port and make it into its own model with a different scale so the changes can be made and the original model is left in tact?
View 7 Replies View RelatedI am trying to get the PDF macro to be hard coded to print all the sheets in an idw. I added this line (guessed at code basically), but it didn't work. Where do I find what the correct syntax should be for this code?
View 1 Replies View RelatedIs there anyway to create 1 PDF from a multi-sheet AutoCAD drawing other than merging several PDF's together. I can create a PDF of a multi-sheet Inventor drawing in one step?
View 4 Replies View Related