Revit :: Upgraded 2012 Model Freezing
Oct 3, 2013
I have a project with over 20 models that were all upgraded from Revit 2012 to Revit 2014. Once upgraded, I was able to reload all the Revit links and see these links in views, as I should. Later the same day, when opening a new local file, I am unable to open a view after loading a link without Revit freezing. Not crashing, but freezing... the application says "Not Responding", the memory allocation is unchanged in the Window's processes, and the journal file is no longer being written to. I thought maybe this is just taking a long time to process, but 1) it didn't take this long to open the view with the loaded link when it was first successful, and 2) I've left it for hours without change.
View 1 Replies
ADVERTISEMENT
Jan 3, 2013
My AutoCAD 2012 freezes every time when I do hatching. It doesnt matterthe size of the drawing nor the type of hatch I use.
View 5 Replies
View Related
Dec 7, 2012
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies
View Related
Mar 9, 2012
My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
View 3 Replies
View Related
Aug 19, 2013
I have a problem that the software is not responding and freezing when creating new drawing or opening another one.
I have windows 7 64 bit Operating system installed on workstation Dell Machine
I look to a lot of discussion and I tried the mentioned ways but still same issue
FYI, this software was working fine with windows XP machine.
View 5 Replies
View Related
Jul 8, 2011
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
View 9 Replies
View Related
Apr 23, 2013
I am running LT 2012 and it keeps freezing at the Loading customiztion files point... This locks the whole pc and I need to do a hard reset.
View 7 Replies
View Related
Dec 5, 2013
The model tree browser is freezing multiple times per day. Even if I close the browser and re-enable it in the View>User Interface menu, it is still frozen. It wont unfreeze until I close Inventor completely and re-open it.
Dell M6700
Win 7 Pro 64Bit
i7 3720QM 2.6GHz
16 GB RAM
Nvidia Quadro K3000M
View 5 Replies
View Related
Jul 24, 2013
The program works fine until I try to edit the boundary of the topography. As soon as I click "edit boundary", the screen goes black for about an hour, then comes back with about 25% loaded. This cycle repeats until the loading is complete, so it takes me a few hours just to enter edit mode. The file is only 17, 280 KB, and Ive been running 240,000 KB files without an issue whatsoever.
View 3 Replies
View Related
May 23, 2012
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
View 3 Replies
View Related
Nov 10, 2011
in acad2008 when publishing I had the option to choose model space, paper space or both to populate the publish.
Has this option been eliminated?
I only want layout tabs to populate my publish.
View 9 Replies
View Related
Aug 30, 2011
I have a drawing that is "Not Responding" when switching from a layout tab to model space by clicking the "Model" tab. I ran a recovery on the drawing and there are no errors. I can't get into model space except by clicking inside my viewport.
View 5 Replies
View Related
Jan 28, 2013
I am doing casting model in the inventor. i need to check the modelling wall thickness.
I tried in section analysis & drafting method but i am not satisfy on that.
View 1 Replies
View Related
Jan 19, 2012
How do I turn off the apply to layout button in thi window
View 4 Replies
View Related
Apr 27, 2012
on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
View 3 Replies
View Related
Mar 3, 2013
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies
View Related
May 16, 2012
How can I convert a .STP file into a DWG 2012?
View 3 Replies
View Related
Jun 10, 2011
I wanted to know how people are labeling or taging the "parts" of their construction, like walls. I want to be able to tag the parts so that a description of the part is pulled from the material so a change to the material affects all lables and tags.
The 2 problems I am running into
1. in a 3D mode I cannot use a materials tag, and so have to rely on a Tag by Category, which limits me to the material name. I want to be able to refer to any of the properties in the material identity tag.
2. In a section or plan view, I can use a material tag, so I can refer to Description, Comments Keywords, etc, but the tags keep going blank and need to be "reloaded" anytime I change anything in the view. If I change the crop boundary, change from Show Parts to Show Original and return to Show Parts, change scale, anything; the tags return to ?. I have to select each tag and then click off of them for the parameters to be displayed; I feel like I am back in ADT with refresh and reload all.
View 9 Replies
View Related
Oct 9, 2012
I had to work in Revit architect 2012 and today i have to open this file again. The program is show message is
Autodesk Revit Architect 2012
Buil : 20110916_2132(x64)
License unavailable. A license is required to run Autodesk Revit Architect 2012 on this computer.
But this file i have to tried to open in another machine is can open. Do i need to recovery my Revit program or re-install.
View 1 Replies
View Related
Jun 18, 2012
Rendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
View 4 Replies
View Related
Sep 24, 2012
I have recently been informed that my Revit 2013 is not compatible with the classes that I am taking. I have installed Revit 2012, but my projects cannot be opened in 2012. Is there a better or a way at all to transfer these projects?
View 2 Replies
View Related
Jul 16, 2012
Student had installed 2012 version and the text is all jumbled up in the status bar. He has been using the program though. On occasion, says he also sees it affecting option bar. See attached.
View 5 Replies
View Related
Oct 3, 2011
I need to import a PDF file into Revit Architecture 2012 and/or AutoCAD Architecture 2012.
View 1 Replies
View Related
Aug 11, 2011
Often as a sole user of Revit when I open a project I have been working on I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am the only one working on the project there are no other users and as far as I can tell no other files open. Any insight into what has triggered this message?
View 2 Replies
View Related
May 15, 2013
my laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies
View Related
Nov 20, 2012
I built a basic facade system as a family in Revit 2012, but the materials won't stick. Every time I try to edit the family and assign a material, the material doesn't show up in the Revit file it's loaded into. Then, when I open the family back up to try editing it again, the material that I assigned to it five minutes ago is already reset to default, despite my saving and reloading it several times.
View 1 Replies
View Related
Sep 15, 2011
I am trying to export part of a structural model to IFC but Revit is exporting the complete model. My file is from a consultant and is created in Revit Structure 2011, I am opening it with Revit 2012. The model contains ‘new’ and ‘existing’ phases which appear to be set up correctly.
I have tried a couple of different methods set up a 3D view and defined it by phase 'new only' so the existing is hidden, and tried to export with the “current view only” checked and uncheckedset up a 3D view and defined it by workset using visibility graphics, and again with the “current view only” checked and uncheckedEach time when I open the Model in Navisworks or Solibri everything is visible.Have tried this in both Struct and Arch with the same result, but I do not have the same issue if I open and export from Revit 2011 (arch) ?
View 6 Replies
View Related
Jan 6, 2012
I'm new to Revit and have a question about quickshifting between 2D og 3D view. I have managed to assign a hotkey for 3D view, but I can't figure out how to assign a hotkey for returning to the view I was in before the 3D view. I know that you can double click the level you want to go to, but I want to use the mouse as little as possible.
View 5 Replies
View Related
Jun 22, 2012
The help file says the keynote file should be located here- C:Documents and SettingsAll UsersApplication DataAutodesk<Revit release name><Imperial or Metric> Library Not happening. I'm in windows xp pro 64
View 3 Replies
View Related
Jul 20, 2011
i want to use the Worksharing monitor with Revit Architecture 2012 SP1 64 bit (part of our building design suite premium), but when i load a workshering-enabled model (wich resides on our Revit server) the monitor stay's empty (stating that i should open a model in Revit)
View 2 Replies
View Related
Jul 26, 2012
We are still on Revit 2012 and from my understanding, there were some improvements in the way Revit exports to CAD files. I'm sure most of you would agree that the export to AutoCAD feature is still a long way off. I wanted some opinions on my thoughts on how to minimize some of the errors that I recieve when I open the exported CAD files.
My problems really pertain to linetypes and hatch patterns. If I do not map any of the patterns to a standard AutoCAD linetype or hatch pattern file, then I get an error reading pattern message if I want to check out the pattern in AutoCAD. I am very inclined to wipeout all of the standard fill patterns and linestyles in Revit and make new ones based on the standard AutoCAD lines and hatches. Does this seem reasonable?
View 1 Replies
View Related
