AutoCAD 2010 :: 2012 Freezing Up When Selecting Hatch Patterns?
Jul 8, 2011
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
View 9 Replies
ADVERTISEMENT
Jul 14, 2011
I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?
View 2 Replies
View Related
Jul 16, 2013
I added a .PAT file to the 'support file search path' in order to use a custom hatch pattern. (Im using AutoCAD LT 2012)
In the process it has deleted all of the predifined hatch patterns and the custom one did not work either. So now I have ZERO hatch patterns.
How do I get the predefined hatches back?
View 5 Replies
View Related
May 23, 2012
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
View 3 Replies
View Related
Feb 24, 2012
I have been using AutoCAD Civil 3D lately but went to use my AutoCAD 2011 I noticed I have no hatch patterns. I thought that these patterns were located in the support folder so I got my DVD that has the program on it out and was going to reload AutoCAD to fix the problem. It would not reload it so I copied the support folder to my computer in the AutoCAD file and still nothing. What can I do to get my hatch patterns back?
View 7 Replies
View Related
Dec 7, 2012
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies
View Related
Mar 9, 2012
My AutoCAD 2012 freezes almost evertime when I do hatching. It doesnt matter the size of the drawing nor the type of hatch i use. It freezes while I try to pick boundary points. When it freezes, I cant even move the curser. I need to restart it from the hub.
What could be the issue? Whats spec on my computer do I need maybe?
Also with the Recovery Management, it takes like forever to try and recover a drawing.
View 3 Replies
View Related
Aug 19, 2013
I have a problem that the software is not responding and freezing when creating new drawing or opening another one.
I have windows 7 64 bit Operating system installed on workstation Dell Machine
I look to a lot of discussion and I tried the mentioned ways but still same issue
FYI, this software was working fine with windows XP machine.
View 5 Replies
View Related
Aug 20, 2012
Where do I save custom hatch pattertns in autocad? What file? Support? Do they have to be saved one at a timeor can they be saved in a folder?
View 4 Replies
View Related
Dec 7, 2011
I opened a drawing that I had not opened in over a month originally created in AutCAD 2011, and now using 2012. It appears only some of the hatch patterns that I created are now duplicated, and in some cases up to 17 times! When I select the pattern it doesn't show that there are multiple hatches underneath, but when selected it shows in the properties box All(2) or more. One of my patterns was scaled down and rotated 90 degrees and because when I select it it's showing 10 entities selected I cannot scale it back or rotate it without deleting and re-hatching. The .dwg is pretty complex so doing this for every hatch that shows multiple would be very tedious.
View 4 Replies
View Related
Jan 18, 2013
Recently switched from AutoCAD 2006 to AutoCAD 2012, I have hatch patterns set up for different area, with scale, layer, etc., when inserted using the Tool Palette. Never had an issue with it, but in 2012 it doesn't seem to work. Instead of inserting the hatch with the layer specified in the tool palette, it assigns the hatch pattern whatever layer was used when hatching a previous area, using the hatch dialog box.
View 3 Replies
View Related
Jul 29, 2011
I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
View 2 Replies
View Related
Sep 2, 2009
recently installed Acad R2010 and I need to install new custom hatches but don't know how.... I got working with Autocad since 1990; probably it was R2.0. This is the first time that I try to do it, so I don´t want to mess the whole thing misplacing my .pat files.
View 9 Replies
View Related
Oct 8, 2013
A work mate here at sometime or another clicked on the "always perform my current choice" check box when the "Hatch - Large, Dense Hatch Patterns" dialogue box appeared.
Question is, is there anyway to reset this so the dialogue box comes back up?
View 2 Replies
View Related
Aug 6, 2008
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies
View Related
Jan 2, 2013
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies
View Related
Jan 27, 2012
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
View 6 Replies
View Related
Jun 7, 2011
I have a little problem with autocad 2012. When I open a dwg in autocad 2012 some hatch turns solid, but same dwg is fine in autocad 2011 or previous versions. What is interesting if I am in autocad 2012 and i click on the hatch and change something on the properties and i click enter it turns normal to what it should be. So i click on the hatch again change back the whatever it was previously and hit enter. I regen everything and its still fine. So basically i did nothing to it and its fixed. So this might be bug I am not sure. So after all this, i save the dwg and exit. I re-open the dwg again in autocad 2012 the hatch is back to solid. What is very interesting in autocad 2011 everyhing is fine no hatch problems at all. I attached two pdfs as to what it should looks like when its correct hatch and what it looks like when i open it.
View 9 Replies
View Related
Oct 22, 2013
Can Hatch Pattern Block other objects in CAD 2012 ? i.e. make other objects behind it and invisible.
View 2 Replies
View Related
Mar 2, 2012
I was adding hatch patterns to AutoCAD LT 2012 and have lost the hatch patterns that come on it (ANSI, ISO) is there anyway to get these back.
View 1 Replies
View Related
Aug 4, 2013
I am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
View 9 Replies
View Related
Oct 11, 2011
im using autocad lt 2012 i got this autocad lt message says that no standard patterns available.
View 1 Replies
View Related
Jul 15, 2013
I have two, seemingly identical, installations of AutoCAD LT 2012 on two machines in our office. Both machines have the MEASUREMENT variable set to 1.
The acadltiso.pat file of both machines has been customized with the addition of two hatch patterns and both of these work just fine.
In addition, the support folders of both installation also have identical sets of custom hatch patterns. On one of these machines thumbnails for these are visible and all works entirely as expected. However, on the other machine, none of these custom hatch patterns appear at all. In fact I cannot even see the custom hatch pattern tab!
View 3 Replies
View Related
May 30, 2012
I would like to import some new hatch patterns, that I have downloaded, into AutoCAD 2008. Where those hatch patterns need to go?
View 2 Replies
View Related
Jul 13, 2012
Where do you go to create new hatch patterns .
View 1 Replies
View Related
Nov 30, 2003
created any custom hatch patterns for Inventor , If so, how?
View 3 Replies
View Related
Dec 22, 2013
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
View 3 Replies
View Related
Aug 26, 2011
I have new hatchs(extension PAT) patterns and want to put the in my autocad architecture 2010, I can't find where to paste them.
View 1 Replies
View Related
Jan 13, 2009
I am trying to load hatch files from StoneCAD. In the past I have been able to take hatch patterns from various sources and locate them in a file within AutoCAD LT, then use them without issue.
I have never touched a .pat file or written anything in notepad or word, just simply copied the .dxf files to a file on my computer and was able to use them through AutoCAD LT 2009. Recently I had to reload the software and I can't figure out where I would go to put these hatch files.
View 4 Replies
View Related
Jul 2, 2006
How do you install new hatch patterns in LT2006. Where are the pat files?
View 8 Replies
View Related
Mar 15, 2013
Is there a way to bring hatch patterns from AutoCAD Architecture into AutoCAD?
View 3 Replies
View Related
