AutoCAD 2010 :: Hatch Turns Solid When Dwg Opened In 2012?
Jun 7, 2011
I have a little problem with autocad 2012. When I open a dwg in autocad 2012 some hatch turns solid, but same dwg is fine in autocad 2011 or previous versions. What is interesting if I am in autocad 2012 and i click on the hatch and change something on the properties and i click enter it turns normal to what it should be. So i click on the hatch again change back the whatever it was previously and hit enter. I regen everything and its still fine. So basically i did nothing to it and its fixed. So this might be bug I am not sure. So after all this, i save the dwg and exit. I re-open the dwg again in autocad 2012 the hatch is back to solid. What is very interesting in autocad 2011 everyhing is fine no hatch problems at all. I attached two pdfs as to what it should looks like when its correct hatch and what it looks like when i open it.
View 9 Replies
ADVERTISEMENT
Feb 8, 2011
Using 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies
View Related
Jan 21, 2013
why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies
View Related
Feb 24, 2011
I'm having problems with creating PDF's and transparency hatching using DWG to PDF.pc3.
The PDF does show transparency but has a fine lined pattern at intervals in the hatched area, it does print just fine though with no evidence of the lined pattern. Only problem is most of our work is supplied as high quality PDF.
I prefer to use DWG to PDF.pc3 due to the excellent quality of the PDF. I have played with modified Adobe PDF.pc3 to mostly remove the lines from the hatch but quality suffers in the bitmapping of the document.
I am using AutoCAD Map3D 2011 and AutoCAD 2011 on a windows 7 boxes and Acrobat X Pro. I get this problem with normal solid hatching and SHP file polygon transparency.
Are they any secret/magic settings to fix solid hatch transparency using DWG to PDF.pc3?
View 7 Replies
View Related
Sep 13, 2012
I'm using Autocad 2012. I've created a 3D model, one of the components of the solids model, I've assigned a transparency value t which appears in the model, and in the orthographic layout view, and plotted as I need and expect it to. The problem I'm having is that in other layout views, other components include a Dots hatch (I've inserted this dots hatch pattern in both paper and model space in attempt to fix the problem). This Dots hatch appears as I need and expect on the computer screen, but when I plot the layout drawing this hatch pattern plots transparent too, even though it resides on completely different layer than the solid component that I do want transparent. I want the hatch pattern to plot opaque, not transparent (in other words the dots appear very, very light....almost invisible when I plot).
View 2 Replies
View Related
Feb 18, 2013
I needed to prepare a Map in which certain area has to be marked out. I did with hatching spending hours on it. But i need to convert it into solid colors. Is it possible to convert them without repeating whole procedure?
[URL].......
View 1 Replies
View Related
Nov 17, 2011
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies
View Related
Jan 27, 2012
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
View 6 Replies
View Related
Dec 3, 2012
I have a problem with a File in Autocad.
We have a dynamic block here at work that has a solid hatch in it. It is a simple block which only utilizes a dropdown menu.
This block is a circle with a solid hatch in it. However when I select the block via dropdown menu, the hatch is not solid, it is a bunch of lines originating from the center of the circle.
I have never had this problem before with this block and nothing has changed with the block.
It also works fine when I open up other drawings.
This tells me that there is a problem with the settings of this specific file but I cannot figure out what setting.
I believe the problem occurred because I brought my work home with me and I have different settings on my autocad (both ACAD 2011).
View 1 Replies
View Related
Oct 22, 2013
Can Hatch Pattern Block other objects in CAD 2012 ? i.e. make other objects behind it and invisible.
View 2 Replies
View Related
Jul 8, 2011
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
View 9 Replies
View Related
Jun 22, 2012
I can't figure out why only on one layer the arrowheads on dimensions are not solid. They are made up of low resolution hatches.
Also the screen shows black and white when plot is in monochrome and color only when the plot setting are for color.
I can't figure out how to keep the screen in color regardless of plot settings.
View 3 Replies
View Related
Aug 6, 2008
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies
View Related
Jan 26, 2008
I've been using Autocad 2007 for the past 5 months without these issues, then I had to create a new account on my computer at work and now EVERY time I create a hatch it turns into this dead mass. Yes, I've tried creating an associative hatch, and no, I can't edit them either.
View 9 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
Apr 21, 2005
i dont know why but sometimes my mouse cursor changes to a cross hatch rather than be an arrow or circle? why is it changing and how can i get it back to like a circle?
its very annoying to paint or erase using the cross hatch as the exact area that will be covered is not shown!
View 4 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Sep 21, 2011
when I create a shape and fill it in for a colour ( so I can send it to a screen printer to be put on our product ), I get an issue with DN-P-2726.dwg. I was trying to recreate the part being painted red, so the screen printer overlays with the black and grey.
View 7 Replies
View Related
Jul 26, 2007
How to explode solid hatch ? .. is it possible ? Just asking.. nothing more..
View 9 Replies
View Related
Mar 22, 2013
I have been having an issue with my hatches, especially when I use solid. I always make them associative but when I have to move an object using stretch, the hatch does not come along with it.
When I hatch an item I generally use the "pick points" option. Do I need to be using select objects?
View 9 Replies
View Related
Jan 22, 2012
I have a hatch (that is not solid). Sometimes it displays as a solid hatch though, although if I move the hatch (even slightly) the display issue is resolved and the hatch displays properly (i.e. not solid anymore). Regen doesn't fix the display issue, only moving the hatch slightly (temporarily).
I'm not sure how far away from the origin the hatch is although it is no further than what it would normally be when it works fine (and it can't be moved closer to the origin anyway as that would screw up my models real world coordinates).
View 9 Replies
View Related
May 31, 2011
I have been trying to save an image at 1200 dpi. The image turns solid black.
I had this problem once before (months ago). I know it has something to do with the Resource Consumption settings (i.e. Edit -> Preferences -> Environment - > Resource Consumption).
I got it figured out before but I reloaded Gimp on my computer so the settings went back to default. It has something to do with increasing the cache size or the total new image size or something. I can't remember.
View 2 Replies
View Related
Sep 11, 2013
I am not sure when but at some point my solid hatch went missing from my CAD is there anyway to get it back? Where would I download this hatch pattern from?
View 7 Replies
View Related
Feb 3, 2012
I'm currently plotting a site plan with different zones highlighted in a solid hatch. Each zone has a different colour and all zones are slightly transparent so i can see the site plan underneath.
The problem is that when transparency box is ticked , the site plan becomes more faded.Is there a way where I can use the transparency tool but keep the original line weights of the site plan.
View 6 Replies
View Related
Sep 28, 2012
I'm drawing over a bitmap image where I'm outlining certain objects. I'd like to hatch over them but make the hatch translucent so image underneath will be partially visible. Is this possible in AC 2012?
View 9 Replies
View Related
Jul 10, 2012
I have a drawing in AutoCAD 2013 with carefully laid out hatch patterns for traced text using clean, closed, non-overlapping, polylines only. (with islands in the holes). When I import this into Inventor sketch the hatch comes through but the islands do not. Such as the 0 gets completely filled in. I don't have the ability to edit this hatch and add the islands.
I can import the dwg without hatch and fill it within Inventor, but I need to have all the enpoints constrained, or the Fill command won't recognize the boundaries. If I import this with contraining the endpoints, then the import takes a very long time (I gave up after waiting 5 minutes).
View 6 Replies
View Related
Dec 5, 2011
i encounter this. In model space i have hatch few objects with solid hatching. When i bk to paper space apply revision cloud for the few object its appear hiding behind the object. What happen??
View 4 Replies
View Related
Apr 21, 2013
I face new problem in using solid hatch command ,when I choose poly lines and use hatch some unwanted lines appears inside hatch area which make my shape separate from others part be meant be unify. I am amateur in using auto cad .BTW , my scale is about 5 micron meter and when I export the drawing int pdf all straight lines become curvy .I upload the image which describe itself my problem. URLs...
View 1 Replies
View Related
Jul 26, 2011
I was just wondering if there was a way to change the default hatch from ANSI31 to Solid or something else?
View 5 Replies
View Related
May 15, 2012
I just tried to do a solid hatch I was filling some walls in plan. No matter how hard I tried it wouldn't let me do it. I didn't get any message asking if I had closed boundry etc. I have tried again a few times and no good. I rebooted computer, just in case, but still no good. I was doing solid hatching just the other day and am doing nothing different.
View 1 Replies
View Related
Nov 4, 2012
i have my layer named in Chinese in max 2012,and i opened the same file in max 2013, and the layer name got garbled?is this a bug or how do i fix it?
View 2 Replies
View Related
