AutoCAD 2010 :: Annotative Hatch In 2012?
Jan 27, 2012
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
View 6 Replies
ADVERTISEMENT
Jun 7, 2011
I have a little problem with autocad 2012. When I open a dwg in autocad 2012 some hatch turns solid, but same dwg is fine in autocad 2011 or previous versions. What is interesting if I am in autocad 2012 and i click on the hatch and change something on the properties and i click enter it turns normal to what it should be. So i click on the hatch again change back the whatever it was previously and hit enter. I regen everything and its still fine. So basically i did nothing to it and its fixed. So this might be bug I am not sure. So after all this, i save the dwg and exit. I re-open the dwg again in autocad 2012 the hatch is back to solid. What is very interesting in autocad 2011 everyhing is fine no hatch problems at all. I attached two pdfs as to what it should looks like when its correct hatch and what it looks like when i open it.
View 9 Replies
View Related
Oct 22, 2013
Can Hatch Pattern Block other objects in CAD 2012 ? i.e. make other objects behind it and invisible.
View 2 Replies
View Related
Jul 8, 2011
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
View 9 Replies
View Related
Feb 7, 2013
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
View 1 Replies
View Related
Nov 19, 2013
I created a associative and annotative hatch for a group of objects. It displays fine and the area measures fine. When I switch the annotative scale in the lower right for the whole drawing, portions of the hatch dissapear from the boundary objects - both visually and from the area in properties, When I switch back to original annotative scale, that area is still no longer there. In essense, parts of the hatch get deleted.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
View 9 Replies
View Related
Feb 26, 2013
Is there a way when creating hatches, for it to ignore annotative leaders? If the line of the leader crosses the area to be hatched, it breaks at the line. But if the arrow crosses the area, it totally freaks out and won't do what it's supposed to (usually inverses what is to be hatched.)
There REALLY needs to be an option to ignore mleader & mtext objects...
View 1 Replies
View Related
Sep 19, 2011
I have a steel angle block cut in section with the ANSI 32 hatch pattern with a hatch scale of 2, the hatch is annotated. The block was created at 1:1. When I insert the block into my section (Anno scale @ 3/4" =1'-0")
The hatch pattern is way out of scale unless I change the annotation scale of the section to 1:1, then the hatch pattern for the block I created looks correct. I tried using the "Annotativedwg" command but I do not need the oblect lines of the block to be annotative so this did not work.
View 0 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
May 10, 2011
My ACA 2012 won't let me hatch an AEC polygon, or a space for that matter.
Is that a new feature, or a bug? Or am I missing something.
View 6 Replies
View Related
Jul 14, 2011
I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?
View 2 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Jul 16, 2013
I added a .PAT file to the 'support file search path' in order to use a custom hatch pattern. (Im using AutoCAD LT 2012)
In the process it has deleted all of the predifined hatch patterns and the custom one did not work either. So now I have ZERO hatch patterns.
How do I get the predefined hatches back?
View 5 Replies
View Related
Apr 24, 2013
I do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing. How do I setup the dims and text to appear correctly in both viewports?
View 7 Replies
View Related
Feb 12, 2013
We are currently in the transition to Annotative Annotation (Dims, Text, etc.).
One obstacle that i have not been able to overcome are graphical elements where I need their thickness to adjust to the viewport scale. Graphic elements like (MatchLines, Property Lines, Limit of Work and Set Backs) these all have thickness to display prominently in our drawings.
Currently we are making duplicate copies of these lines and adjusting thier thickness but this defeats the purpose of having annotative lables etc.
I would like an annotative line with a thickness.
Ex. a 12" thick line thru a vport with 1/8" scale will print at 1/8" but the same line thru a vport at 1/16" will print at 1/16".
We would like the the line to maintain it's printed thickness (1/8") no matter the vport scale.
I have tried using the Line Width Display but that just makes a mess...obstructs the dwg when zoomed out, rounds the end of dashes etc.
View 1 Replies
View Related
May 23, 2011
I am really confused on an Annotative Text style issue. I have a blank drawing and i need to set up an annotative text, dimension and multileader style. So i started with the Text Style.
Now i would like the annotative text size to be 2mm, Arial standard. However whenever i try to do this, it changes my 2mm to 3mm which is not what i am after.
Is there some limitation to the font or is this AutoCAD error or am i just trying to do something odd.
View 6 Replies
View Related
Apr 19, 2013
I am using the copy and paste clipboard option to bring text into my drawing. The text was annotative at one scale and brought into a new dwg (model space) which had a different annotative scale. When I brought the text in, it came in too small, so I scaled it properly. It did not appear in the paperspace viewport, even thought it was there in model space. I did a properties on the text and it did not allow me to change the texts annotative scale.
View 2 Replies
View Related
Oct 28, 2013
When I worked for my previous firm, they had a library full or blocks that would change scale by picking from a small pull down menu on the block itself. I could automatically change a section of a 4" CMU to an 8" CMU just by picking from the options. I am trying to create some of those now. Are those dynamic or annotative blocks. What is the parameter I would use.
View 9 Replies
View Related
May 18, 2013
i have created a block or several and made them annotative and I have worked with them, and the drawing for some time now without any issues. However, randomly during work, I suddenly noticed that all annotative blocks are displaying every scale associated to them all at once.
Upon closer inspection it turned out that different instances of a block with different values of attributes have been inserted as separate blocks with randomly generated names *U808, *889 etc. Each one of these generated blocks has in itself lines and text values, but duplicated or triplicated, in different sizes matching what have once been scales.
I cannot edit these generated blocks, they are not listed when I go to BEDIT.
Even blocks that didn't have any attributes, a block that is only a single circle, has been corrupted in this way.
P.S. I use AutoCad 2012.
View 6 Replies
View Related
May 16, 2012
I have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
View 2 Replies
View Related
Jun 11, 2013
I had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.
This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.
I realize that I could just create a new style but instead would really like to know how to change what I am already using.
View 9 Replies
View Related
Aug 3, 2012
Why are Multileaders with Annotative Blocks not possible?
View 6 Replies
View Related
Apr 5, 2012
I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
View 3 Replies
View Related
Nov 5, 2012
how annotative objects function through xrefs and am running into some trouble.I created a brand new drawing, made an annotative symbol and 2 peices of annotative text, all three have 1"=20' and 1"=40' assigned to them. I can switch my scale back and forth and the objects act as they should.
If creat a second drawing and xref the first one, the only way I can see these xref'd objects is if I set ANNOALLVISIBLE to "1" or if I select one of their xref scales as the current scale 1"=20'_Xref or 1"=40'_Xref.
My goal is to be able to have plans that are annotative that can be xref'd into another annotative drawing and have the objects in both that are the same scale show up.
View 1 Replies
View Related
Feb 13, 2012
After closing and re-opening my drawing, my annotative mtext is moving, and shrinking. When I click on the text, the properties say annotative is set to NO. I reset it to YES and fix it, but once I close it and re-open its screwed up again, and annotation is set back to NO.
View 4 Replies
View Related
Jan 4, 2013
I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies
View Related
Nov 26, 2013
Is there a way to move the tip of the other scale's arrow of an annotative multileader in the model space ?
For exemple, I shifted this tree a little bit to the left. I have a multileader pointing to the middle of it to indicate the tree species. When selecting the multileader, I can use the little blue square to move the tip of the small arrow but how can I move the other one ?
Since that multileader is pointing to other trees as well, I cannot move the whole thing.
I guess I could go to the paper space and into a viewport using that scale, but I need to do that quite often and I'm sure there should be an easier way.
View 6 Replies
View Related
Dec 6, 2012
I am a beginner in autocad. What is the difference between annotative and associative text?
View 1 Replies
View Related
Aug 30, 2012
I have inserted an XREF with annotative blocks. The blocks in the original drawing are 1:1. In the new drawing I want to plot the XREF at 1:250. How do I set the annotative scale to the blocks with out adding scales to the original drawing?
View 1 Replies
View Related
May 19, 2011
I am having problems getting the CAD Standards Checker - Dimstyle plug-in to correctly recognize Annotative dimstyles.
I should point out that this error occurs in both AutoCAD 2011, and AutoCAD 2012 (which these screen shots are from)
My DWS file is correctly configured to have the dimstyle set to be annotative:
Then, I save this file to be a DWT file for our company's standard drawing template.
However, when I configure standards and add the DWS file to the DWT file ...even though the files are identical... I run the standards checker and get this!
Is there something I'm doing wrong? Or is the CAD Standards Checker not properly recongizing the Annotative Dimension Style?
System specs:
OS: Windows 7 Professional 64bit - SP1CPU: AMD Phenom II X6 1100T @ 3.51GHzMem: 16GB DDR3HD: 64GB SSD
View 5 Replies
View Related
Oct 17, 2012
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
View 6 Replies
View Related
