We are currently in the transition to Annotative Annotation (Dims, Text, etc.).
One obstacle that i have not been able to overcome are graphical elements where I need their thickness to adjust to the viewport scale. Graphic elements like (MatchLines, Property Lines, Limit of Work and Set Backs) these all have thickness to display prominently in our drawings.
Currently we are making duplicate copies of these lines and adjusting thier thickness but this defeats the purpose of having annotative lables etc.
I would like an annotative line with a thickness.
Ex. a 12" thick line thru a vport with 1/8" scale will print at 1/8" but the same line thru a vport at 1/16" will print at 1/16".
We would like the the line to maintain it's printed thickness (1/8") no matter the vport scale.
I have tried using the Line Width Display but that just makes a mess...obstructs the dwg when zoomed out, rounds the end of dashes etc.
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
I am currently using AutoCAD 2011LT. When I add a leader sometimes the text appears fine and sometime the text appear to go bold, I tried retyping the text but it appears to be luck of the draw as to when it happens. I don't have a problem with this showing up on the screen but it transfer to prints on both paper and PDF.
I have a picture of a pear. One line marks the different colors between the pear and the background, one line parallel to the first one .I used vectorization, technical drawing to have the lines without problem. I would like to know how to determine the thickness of these lines.I would then later color the differents surfaces.
I need to make lines of different thicknesses, with arrowheads. However, when I increase the line width the arrowhead should not be proportional. It need to stay a bit smaller.
Example: if the line is expanded to "Thick 3", I need the arrow keeps equivalent to "Thick 2" - for aesthetic reasons.I can do edit as I show in the bottom of the sample picture.
However, I need to build HUNDREDS of arrows of different sizes.Is there any way (Macro function?) permitting I enlarge/reduce line thickness and allowing me to edit the arrow without changing the line thickness?
Important Note: Is not enough I edit some arrows and save them as a kind of Template, then import them to work. The arrows have different ways in thickness and may be straight, curved, winding, etc.. Hence the need to edit the edges easily.
I need to form a line/lines with thickness on the surface of a sphere as seen on the attached image. I also want to apply transforms to the line while keeping it stay on the surface. How can I do that?
I do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing. How do I setup the dims and text to appear correctly in both viewports?
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
I am really confused on an Annotative Text style issue. I have a blank drawing and i need to set up an annotative text, dimension and multileader style. So i started with the Text Style.
Now i would like the annotative text size to be 2mm, Arial standard. However whenever i try to do this, it changes my 2mm to 3mm which is not what i am after.
Is there some limitation to the font or is this AutoCAD error or am i just trying to do something odd.
I am using the copy and paste clipboard option to bring text into my drawing. The text was annotative at one scale and brought into a new dwg (model space) which had a different annotative scale. When I brought the text in, it came in too small, so I scaled it properly. It did not appear in the paperspace viewport, even thought it was there in model space. I did a properties on the text and it did not allow me to change the texts annotative scale.
When I worked for my previous firm, they had a library full or blocks that would change scale by picking from a small pull down menu on the block itself. I could automatically change a section of a 4" CMU to an 8" CMU just by picking from the options. I am trying to create some of those now. Are those dynamic or annotative blocks. What is the parameter I would use.
i have created a block or several and made them annotative and I have worked with them, and the drawing for some time now without any issues. However, randomly during work, I suddenly noticed that all annotative blocks are displaying every scale associated to them all at once.
Upon closer inspection it turned out that different instances of a block with different values of attributes have been inserted as separate blocks with randomly generated names *U808, *889 etc. Each one of these generated blocks has in itself lines and text values, but duplicated or triplicated, in different sizes matching what have once been scales.
I cannot edit these generated blocks, they are not listed when I go to BEDIT.
Even blocks that didn't have any attributes, a block that is only a single circle, has been corrupted in this way.
I have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
I had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.
This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.
I realize that I could just create a new style but instead would really like to know how to change what I am already using.
I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
how annotative objects function through xrefs and am running into some trouble.I created a brand new drawing, made an annotative symbol and 2 peices of annotative text, all three have 1"=20' and 1"=40' assigned to them. I can switch my scale back and forth and the objects act as they should.
If creat a second drawing and xref the first one, the only way I can see these xref'd objects is if I set ANNOALLVISIBLE to "1" or if I select one of their xref scales as the current scale 1"=20'_Xref or 1"=40'_Xref.
My goal is to be able to have plans that are annotative that can be xref'd into another annotative drawing and have the objects in both that are the same scale show up.
After closing and re-opening my drawing, my annotative mtext is moving, and shrinking. When I click on the text, the properties say annotative is set to NO. I reset it to YES and fix it, but once I close it and re-open its screwed up again, and annotation is set back to NO.
I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
Is there a way to move the tip of the other scale's arrow of an annotative multileader in the model space ?
For exemple, I shifted this tree a little bit to the left. I have a multileader pointing to the middle of it to indicate the tree species. When selecting the multileader, I can use the little blue square to move the tip of the small arrow but how can I move the other one ?
Since that multileader is pointing to other trees as well, I cannot move the whole thing.
I guess I could go to the paper space and into a viewport using that scale, but I need to do that quite often and I'm sure there should be an easier way.
I have inserted an XREF with annotative blocks. The blocks in the original drawing are 1:1. In the new drawing I want to plot the XREF at 1:250. How do I set the annotative scale to the blocks with out adding scales to the original drawing?
I am having problems getting the CAD Standards Checker - Dimstyle plug-in to correctly recognize Annotative dimstyles.
I should point out that this error occurs in both AutoCAD 2011, and AutoCAD 2012 (which these screen shots are from)
My DWS file is correctly configured to have the dimstyle set to be annotative:
Then, I save this file to be a DWT file for our company's standard drawing template.
However, when I configure standards and add the DWS file to the DWT file ...even though the files are identical... I run the standards checker and get this!
Is there something I'm doing wrong? Or is the CAD Standards Checker not properly recongizing the Annotative Dimension Style?
System specs:
OS: Windows 7 Professional 64bit - SP1CPU: AMD Phenom II X6 1100T @ 3.51GHzMem: 16GB DDR3HD: 64GB SSD
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
The first, if i have created many annotative dimensions and texts and with the time many scales get attached to these objects during editing ( the scales which i don't use on my layouts anymore but have used on these objects ones) How can I quickly and efficiently delete all the scales that are not in use on my layouts in my viewports for all the annotative objects?
the second question is how can I create annotative tags( dynamic blocks that can be scaled like annotative texts)?
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4 Annotation Visibility = ON Automatically Add Scales = ON
I have a drawing with some annotative blocks. ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) the Blocks do not show up.
Is there any way to get arround this? Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.
I am rather new to AutoCAD 2010, and have observed issues with Annotative Scale. I have tried to avoid that function like the plague, but now I have some time to learn of it and its power.
I've been tasked with creating/updating Electrical Department symbol blocks. Right now, I am working on lighting fixture blocks, and I have this particularly odd scenario when i'm making the Block Attributes. My new block is for a 2 foot by 4' lighting fixture. When this block is to be inserted in Model Space, the size will always remain constant (2'x4'), but I need the Attributes (one for the Fixture Type, and one to denote the Circuit Number and Switch leg) to change sizes per the plan scale on Paper Space.
How, and in which space, should I construct my light fixture block & attributes? And, which parts of the block or attributes should be Annotative? Also, the light fixture can be either oriented vertically or horizontally. Will I still be able to relocate the attribute using -EATTEDIT or -ATTEDIT?
I seem to have lost the ability to add or remove an annotative scale for a single item (piece of text, block etc). I've always picked the annotative scale in the properties box and then hit the box at the right which brought up a small dialogue box where I could add or remove scales for the item that I'd highlighted. When I hit that box now, or the similar box in the right click menu nothing happens. AutoCAD acts like the box is present, but it isn't. The right click option of remove current scale doesn't work either as it seems to remove the scale from multiple items.
I have recently gone from two monitors to one (it's a real bummer). Is it possible that the dialogue box is open somewhere I can't find it? I have hit the show desktop button and it isn't there.
I just loaded AutoCAD 2012 on Friday and have noticed that when I use annotative text or mtext in paper space when printing or previewing the text it rotates 90 degrees to vertical, but is horizontal in the drawing. Only does this with annotative text or mtext, non annotative text and mtext remains horizontal when previewing or printing.
