AutoCAD 2010 :: Annotative Objects Not Scaling In Layout Viewports
Oct 30, 2012
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
View 3 Replies
ADVERTISEMENT
Jun 26, 2012
I love annotative scaling of objects it is a great feature. I am however having one problem that I'm not sure if I've missed a setting or something. Is there a way to prevent civil 3d from scaling your annotative objects based on the view scale you are looking at? For example if I zoom out (in model space or max viewport) to show my entire drawing and regen, civil 3d scales all my text and blocks to an enomous scale esentially blocking my entire drawing with solid colour. also if I zoom into a small area to do some detail work all my text becomes microscopic and unuseable. This makes adjusting text so it doesn;t overlap other text very difficult if it never appears at the correct size. Is there a way to freeze annotative objects at thier correct scale (for the current viewport scale) so they dont scale simply because you zoom in or out on a drawing?
View 3 Replies
View Related
Jun 11, 2013
I had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.
This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.
I realize that I could just create a new style but instead would really like to know how to change what I am already using.
View 9 Replies
View Related
Oct 17, 2012
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
View 6 Replies
View Related
Apr 5, 2012
I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
View 3 Replies
View Related
Aug 23, 2013
I have a drawing file with lots of layouts, some of which have multiple viewports. I want to create a new layer and use it in just a few viewports. Is there a way to set the default vpfreeze setting to frozen for new layers? That way I can just thaw it in a few viewports instead of trying to vpfreeze it in a lot.
LT, C3D 2005 - 2014
XP, Vista, 7
View 1 Replies
View Related
Nov 17, 2011
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies
View Related
Aug 20, 2012
I have 2 quick questions:
1- How do I turn OFF the display of Layers in Layout viewports, but they remain ON in the Model?
2- How do I rotate a group of objects to match my orthogonal UCS?
View 2 Replies
View Related
Nov 5, 2012
how annotative objects function through xrefs and am running into some trouble.I created a brand new drawing, made an annotative symbol and 2 peices of annotative text, all three have 1"=20' and 1"=40' assigned to them. I can switch my scale back and forth and the objects act as they should.
If creat a second drawing and xref the first one, the only way I can see these xref'd objects is if I set ANNOALLVISIBLE to "1" or if I select one of their xref scales as the current scale 1"=20'_Xref or 1"=40'_Xref.
My goal is to be able to have plans that are annotative that can be xref'd into another annotative drawing and have the objects in both that are the same scale show up.
View 1 Replies
View Related
Nov 2, 2012
have some questions about annotative objects.
The first, if i have created many annotative dimensions and texts and with the time many scales get attached to these objects during editing ( the scales which i don't use on my layouts anymore but have used on these objects ones) How can I quickly and efficiently delete all the scales that are not in use on my layouts in my viewports for all the annotative objects?
the second question is how can I create annotative tags( dynamic blocks that can be scaled like annotative texts)?
View 3 Replies
View Related
Aug 23, 2011
I have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
View 3 Replies
View Related
May 14, 2012
Seem like when I cut and paste objects from one file to another, particularly objects with different annotative scale, my lexisting ayers would get corrupted. Standard layer names will be appended with "@_96" at the end (i.e. "symbols" to "symbols@_96"l . The 96 would represent the annotative scale factor in the current file. If I exit out and reopen the file, all layer names will return bsck to normal. However if I cont. to work on the file for a long time, the file will get corrupted. when restore, a lot of annotative symbols that where on different "@_96" layers will merge into on new "audit" layer. Sometimes the symbols show up with a different current annotative scale
View 2 Replies
View Related
Sep 19, 2012
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies
View Related
Aug 24, 2011
Can it be done like you can with Text etc?
i know it can be done via lineweights, but you cant "lock" the lineweight in model space,
at the mo, to generate a thinkness in a line i use the global width for that pline.
i dont want to use line weights as i sometimes have multiple lines with different widths on the same layer, i could split the layers, but i'd rather not to.
View 8 Replies
View Related
Jul 9, 2013
I am trying to learn Annotative text using multiple viewports. My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?
View 7 Replies
View Related
Sep 3, 2012
I'm currently trying to make an MV block which is a combination of a 2D symbol and its 3D representation. I want the 2D symbol to scale in line with the annotation scale so have set the annotative flag on my symbol block but I do not want the 3D representation to scale so this does not have the flag set. However, when I put the two blocks into my MV block and then alter the annotation scale, both the 2D and 3D blocks both scale.
Is there something more that I need to be doing to to make the two blocks act independently and comply with the annotative flag set on them? I have seen this behaviour work on MEP2013 but can't see anything different on its 'devices' and my simple blocks.
View 9 Replies
View Related
Sep 28, 2011
I've been watching some youtube tutorials on annotations, seems like I need to set the scale for Text / Dimensions / Multileaders / Leaders / Hatches.
Just wondering, is there something like a "master annotation" config I can use to set them all at once?
And which scale do I use to control the scale of my lines in my drawing? I draw in metric, and when I select a linestyle called HIDDEN, I need to set the scale to about 300 for it to appear as a HIDDEN line, other wise it's just a normal line.
How do I go about fixing that? Under normal circumstances, it should appear as a hidden line with just a scale factor of 1 in properties right? Why do I always have to make mine a scale factor of 300? I draw in 1:1.
View 6 Replies
View Related
May 14, 2012
I'm setting up CAD standards for my office (title blocks, tool palletes, dynamic blocks, you know the drill). This should have been done long ago by another employee who makes more money than me, but that is beside the point. (Maybe you know the drill on that front too...)
This is a granite counter top fabrication shop, and I've created a dynamic block containing all the edging profiles we are producing at the moment. Contained in the block are "3D" versions of each profile, both with and without dimensions (for annotation purposes), and a 2D closed polyline showing only the "section" of the profile, to be exploded from the block and used as an extrusion shape when 3D drawings of the finished look of a countertop are necessary.
The issue I'm having is with scaling/annotative scaling. I have created a custom tool pallete with this edge profile block and a couple other dynamic "mark-up" blocks. (See Layout1 in the attached drawing.) What I need is for this edge profile block to insert into model space at "actual size" (3/4" thick), so when it is exploded and extruded, I'm creating that 3D edge at the proper proportion in my drawing. But for annotative purposes, I want to be able to insert the block at a different scale in paperspace (roughly at the size it is shown in the attached drawing).
CRYSTAL_TEPLATE01.dwg
View 9 Replies
View Related
Feb 7, 2013
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
View 1 Replies
View Related
Oct 4, 2013
Im trying to keep annotative blocks in the same spot on different scale viewports. The main issue Im having is, when i have a lets say house plan in viewport #1 and have all my blocks in place that I moved copyed from my template. When I open another viewport at a diffrent scale the blocks move. Im useing a large number of blocks for electrical symbols we use at work that I need to be in every viewport so we can copy them and place them where needed on the plan.
View 3 Replies
View Related
Jan 7, 2012
I was just notified I am supposed to show a small class how to make our company title blocks using attributes and what annotative scaling is and how to use it. videos or related forums so I can set up something to show tomorrow morning. We are going to be setting up our block library and setting up our title blocks. Should this be done using templates for each paper size?
View 2 Replies
View Related
Aug 11, 2012
My properties button has quit picking viewports. When I pick the viewport outline, my properties dialog box say's "no selection" Sometimes I get a blank dialog box and have to repick the viewport to get the dialog box to give me information. However, it will not give me the information to set viewbox scale, or will not let me lock the modelspace area so that I can zoom without altering my scale setting. Is there a setting that has gotten changed or what. A week ago the command was working fine.
View 9 Replies
View Related
Feb 3, 2012
I'm running into a problem today setting up a drawing. The drawing has three viewports at different scales all looking at different parts of a model I have xrefed. The problem is that when I set a viewport to 1" = 50' for example, it is really being set to 1" = 50" -- off by a factor of 12. I cannot figure out where this problem stems from, but it is driving me a little crazy at the moment. I can work with it, by setting the scale with this correction factor in mind, but I would rather be able to set my viewports correctly, in case someone uses this drawing later as a go by or to do revision work.
View 1 Replies
View Related
Jun 27, 2013
For some reason I have it in my head that you can put all of your text and dims on in model space, then when scaling your viewports the dims and text will re-size its self automatically for that viewport setting. I.e text will be 25 in model space, but in vieports it will plot at 10 or 2 depending on the viewport setting.
View 2 Replies
View Related
Nov 28, 2012
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
View 9 Replies
View Related
Jan 4, 2013
I wrote a program to separate drawings with multiple layouts into several drawings. The problem I'm running into is even though there is only one viewport in the layout.the program is finding two. One has the right viewcenter, width and height the other is wrong.
View 1 Replies
View Related
Jul 4, 2012
I made a 90 meter box in model, created a titleblock and added a viewport in layout. The viewport scale is 1:1. Plotting scale is 1:1. It just dawned on me that because everything is 1:1.... I should have a peice of paper 90 meters long. My thick head has managed to confuse me, Does Cad apply a scale to the viewports even though its set 1:1 and plotted 1:1?
View 9 Replies
View Related
Jun 20, 2011
My drawing will only allow 3 viewports in each paperspace layout created. When I try to add or copy more than 3 viewports previous viewports created will go blank and cannot be activated anymore. I have never had this issue before, is there a setting that can fix this problem? I am running AutoCAD Architecture 2010
View 2 Replies
View Related
Nov 14, 2012
I am printing a Layout that has 3 Viewports. The View ports are of an aerial photograph that is a 600DPI TIFF file about 1GB in size. When I print the single sheet 24x36 the PDF file is 75mb
I am new to Acrobat X, I had been using version 7. I remember there being a reduce file size option in the old version but I cant find it in X.
Any tips on getting the printed PDF file smaller? Is it something I can do in AutoCAD or Acrobat?
Details:
AutoCAD 2010
Win 7 Machine
8GB RAM
2.8 ghz i7
Adobe Acrobat Pro X
View 4 Replies
View Related
Jul 4, 2013
Using 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies
View Related
Dec 17, 2013
when I insert a block that is made up of different layer lines and shapes then they only show up in the model tab. The other layouts I have won't show the blocks even though the same layers are turned on and unfrozen in these other layout viewports just like the model space. It's looking like trying to use multilayer dynamic blocks will be pretty useless unless they work in every layout viewport and not just in model space.
View 5 Replies
View Related
