For some reason I have it in my head that you can put all of your text and dims on in model space, then when scaling your viewports the dims and text will re-size its self automatically for that viewport setting. I.e text will be 25 in model space, but in vieports it will plot at 10 or 2 depending on the viewport setting.
View 2 RepliesFor some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
I am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View RelatedI then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
When a new document is created I want to set the model space to have tiled viewports. This can be done within autocad using the view/viewports/new viewports menu option. How do I do this using the API?
View 5 Replies View RelatedI've been using autocad 2011 for a little while now and am overjoyed with my freedom in working with several modelling viewports simultaneously I usually split it in two (one top and one front) now my question is if I can limit my front viewport to only see a my objects within a specific depth? like 5-10 meters from my 0 point. I know how to do it in a "paperspace section" for my blueprints but it would be nice to do the restrictions in modell viewport while working.
View 6 Replies View RelatedI created a drawing in the model tab but when I go to the other tabs such as "layout 1" the work I have done in model space isn't showing through the viewport.
View 4 Replies View RelatedI am working on AutoCAD 2013LT and I tried to use multiple viewports in model space which is a new thing to AutoCAD (i think). Anyway I wasn't using it on the last version.
Under View Tab when I go to choose different Viewport configurations sometimes some of the views change to isometric view. I don't know how to change it back to 2d view.
They mension something about viewport control lables which should be in top left corner, but I don't see those in my viweports.
I usually work in 2 viewports in my model-space (one Top and one Front) now I'm taking over a project from a college and it seems like my 2 viewports become linked so that when I switch between them the other one flips, can this strange link be broken?
View 8 Replies View RelatedI would like to scale all objects by x2 in Model Space using reference point xyz=0. Just like one would do via scale command. However, I would like to do so programmatically in VB.NET
View 2 Replies View RelatedRecently, I switched companies. I am supposed to insert their sheet template into model space at 3/4" = 1' which I have done. There are parts that need to be detailed. On the detailed part the dimensions all come up fine (after altering the scale/dimstyle) but when I try adding dimensions to the original drawing, instead of getting the 3'-0" measurement I should get, somehow I get the measurement for 48'-0".
View 3 Replies View RelatedI have a model space with a few XREF drawings. I have a layout with a viewport of these drawings. All seemed fine until I imported another drawing using XREF. I went to adjust this viewport and it is not showing the new drawing that has been imported into model space (I can see the three drawings that were there but the new one will not appear) to you have to like "reload" a viewport or something? (From my understanding viewports alwasys stay current with model space)
View 8 Replies View RelatedI am trying to see my model space in paper space but nothing is there. tried creating viewports, but they are blank, tried to try different scales, still no joy? tried different layers etc, all layers are on!
This is only happening last couple days but is same for all my drawings. I must have changed a setting or got something very wrong?
how to get my paperspace back!
If I have UPSFOLLOW set to '1' when using multiple viewports in the workspace when I click from one viewport to another it refreshes the viewport that I'm leaving with the setting of the viewport I select. If I set UPSFOLLOW to '0' it doesn't happen. Is there a way of stopping this happening without having to keep changing the UPSFOLLOW setting i.e. have UPSFOLLOW set to '1' and the viewports not change when swapping them?
View 2 Replies View Relatedi'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I have set up a template to A3 - I have amended the page setup to A3 and I have drawn my title block and saved it as a template.
I am now trying to insert the template onto a drawing I have done. I insert the template into a new layout and then do MVIEW to insert my drawing from model space. The problem I am now encountering is that my drawing in MVIEW will no scale correctly. It should scale as 1:100 at A3 as the drawing does before I insert my title block, but when I insert it, I then have to scale at 1:500
I have a delay when switching back and forth between model space viewports,
View 7 Replies View RelatedCan i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
When I create drawings of the objects in model space but can I add text annotations, leaders, dimensions etc in paper space.
View 9 Replies View RelatedI have been working on a set of residential drawings. I Have read several different ways to achieve text size when plotting.
I currently have all my text and dimscale set to 0" height. I have the 'scale dimensions to layout (paper space)' radio button checked. However, I cannot see even the slightest hint of test when looking at my screen. I sent a dwg to a friend of mine who plotted it. no text was visible. What height should I set the text to in order to achieve an 1/8" tall plotted text? I cannot see text in either the model space or in the paper space.
When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View RelatedFor some reason, I cannot dimension in paper space. i beleive I have set everything up correctly, but the dimensions in paper space are not correct.
See attachement.
The circle is 12" in diameter, but if the viewport is 1:2 scale, the diminsion in paper space shows 6". what do i need to do to correct this?
I have done a drawing of some house plans. I am now trying to enter text in model space, but when i enter it, it appears very small at 2.5, only if i enter at 500 it appears ok. In the layout tab the text at 500 appears very large, and when i enter 2.5 it appears ok. I have not made any changes anywhere.
View 9 Replies View RelatedHow to rectify my model space text issues for a set of drawings. There are approximately 12 drawings which all have the same problem. I have not seen this problem in other drawings.
The text in model space appears bold and rough. I have checked that all the text is set on the 0 Z plane. I have taken the following corrective actions and have not had success:
-Confirmed text is at Z=0
-Reset the UCS to world
-Changed the Z coordinate to arbitrary number and set it back to 0
-Checked that drawing & viewports are 2-D Wireframe
-Other Desperate Measures: Purged, Audited, Created in PS then move to MS
We had a CAD temp. that set up the drawings who is no longer with us, so I have clue what he did to the drawings when setting them up.
Text in the model space is displayed annoyingly thick. It was always ok but something changed beyond of my knowledge in one particular project only. Can't change it back, it plots ok though.
You can compare the pictures: two different files with absolutely identical text settings... And, when I try to choose between text styles in text properties it says "The current style has been modified..." although I did not! I think both things are related some how...
I have ACad 2011..
Win 7 / 64b, 4GB, 3.2GHz, Quadro 600. Autocad 2008.
Anyway, I can't seem to be able to type anything in text or mtext windows. I either have my keyboard input ignored completely, or I get blank spaces, depending on what font I choose. Disabling the Aero themes don't work. All runs fine in a XP virtual machine, but more slowly.
Getting the proper text size in model space.
If single or multi-line text is set at a particular size, notes or dimension text for one object (like a fabrication detail) could be legible, where as text for a much larger object (like a floor plan) could be hard to read.
Is there a way to compensate for this? Or is it a matter of manually adjusting text size for every drawing component? So far, I have found the easiest way is through the Quick Properties feature.