Can i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
I am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View RelatedI then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
I would like to scale all objects by x2 in Model Space using reference point xyz=0. Just like one would do via scale command. However, I would like to do so programmatically in VB.NET
View 2 Replies View RelatedRecently, I switched companies. I am supposed to insert their sheet template into model space at 3/4" = 1' which I have done. There are parts that need to be detailed. On the detailed part the dimensions all come up fine (after altering the scale/dimstyle) but when I try adding dimensions to the original drawing, instead of getting the 3'-0" measurement I should get, somehow I get the measurement for 48'-0".
View 3 Replies View Relatedi'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I have set up a template to A3 - I have amended the page setup to A3 and I have drawn my title block and saved it as a template.
I am now trying to insert the template onto a drawing I have done. I insert the template into a new layout and then do MVIEW to insert my drawing from model space. The problem I am now encountering is that my drawing in MVIEW will no scale correctly. It should scale as 1:100 at A3 as the drawing does before I insert my title block, but when I insert it, I then have to scale at 1:500
For some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
For some reason I have it in my head that you can put all of your text and dims on in model space, then when scaling your viewports the dims and text will re-size its self automatically for that viewport setting. I.e text will be 25 in model space, but in vieports it will plot at 10 or 2 depending on the viewport setting.
View 2 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedWhat is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI'm looking to size my model space window so that it is exactly 1280x720 pixels of viewable area for the sake of using plot to .png to create the right size images.
Is there a quick command or menu somewhere that shows the current viewable area of the model space window and allows for it to be changed?
I am using AutoCAD 2012.
Getting the proper text size in model space.
If single or multi-line text is set at a particular size, notes or dimension text for one object (like a fabrication detail) could be legible, where as text for a much larger object (like a floor plan) could be hard to read.
Is there a way to compensate for this? Or is it a matter of manually adjusting text size for every drawing component? So far, I have found the easiest way is through the Quick Properties feature.
Is there any way that i can stretch an Obj that was created as a block right in model space? in another word i usually right click on the block and go to the block editor and stretch inside the editor, i don't want to do that i have reference point in model that i want to snap end point to the reference. As in the pic i want to stretch the right leg to the right 7.5 in.
View 7 Replies View RelatedIs there a way to quickly change all text font in model space in autocad electrical 2009 rather than doing it manually for every text block?
View 6 Replies View RelatedI've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
Without opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
Using acad2011 I would like to place a border (rectangle) in paper space so it measures 2cm form all sides of the paper when i print it.
View 6 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View Related