I would like to scale all objects by x2 in Model Space using reference point xyz=0. Just like one would do via scale command. However, I would like to do so programmatically in VB.NET
View 2 RepliesI am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View RelatedI then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
Recently, I switched companies. I am supposed to insert their sheet template into model space at 3/4" = 1' which I have done. There are parts that need to be detailed. On the detailed part the dimensions all come up fine (after altering the scale/dimstyle) but when I try adding dimensions to the original drawing, instead of getting the 3'-0" measurement I should get, somehow I get the measurement for 48'-0".
View 3 Replies View Relatedi'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I have set up a template to A3 - I have amended the page setup to A3 and I have drawn my title block and saved it as a template.
I am now trying to insert the template onto a drawing I have done. I insert the template into a new layout and then do MVIEW to insert my drawing from model space. The problem I am now encountering is that my drawing in MVIEW will no scale correctly. It should scale as 1:100 at A3 as the drawing does before I insert my title block, but when I insert it, I then have to scale at 1:500
For some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
Can i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
For some reason I have it in my head that you can put all of your text and dims on in model space, then when scaling your viewports the dims and text will re-size its self automatically for that viewport setting. I.e text will be 25 in model space, but in vieports it will plot at 10 or 2 depending on the viewport setting.
View 2 Replies View Relatedis there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View Relatedhow it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedI have some code in a VBA program I'm trying to convert to .net that loops through all the entities in model space as in the code snip below. What I can't figure out is how to get the total number of objects in model space at the start so I can use this info to advance a progress bar. ie the equivilent of VBA's "ThisDrawing.ModelSpace.Count"
Dim bt As BlockTable = tr.GetObject(DB.BlockTableId(), OpenMode.ForRead)
Dim btr As BlockTableRecord = tr.GetObject(bt(BlockTableRecord.ModelSpace),
OpenMode.ForRead)
' Loop for each entity in the modelspace
For Each entId As ObjectId In btr
'<code sniped>
'advance progress bar
Next
I worked all day yesterday on a drawing and late afternoon all the objects in model space disappeared except for an OLE object (jpg photo). Objects in the two paper spaces are left unchanged. I don't remember what command I was using at the time. There was another OLE jpg that disappeared in model space. It appears that all layers are on. The file is fairly large - 12 MB and even though the objects disappeared, the size has remained the same so I'm hoping that they are still there somewhere. Zoom All and Regen doesn't work.
I use Autocad LT 2013 and Windows 7. The file is too large to attach.
I have two objects that I would like to link together in model space. I realize this is easy to do using paper space but I am curious if this can be done in model space.
The two objects are wire connections but they are spaced far apart in my drawing and can be a pain trying to find thier locations all the time. if I could select or click the first connector and be able to pan or zoom to the appropriate connection by link or other means.
I have always been able to highlight separate objects in model space, and now i can only do one at at time??? I click on the second object, and the first one stops being highlighted.
I don't know if somehow i changed a setting on accident, but i don't know how to get it back to be able to do multiple separately.
In a 2D drawing I want to arrange model space objects in a pviewport such that a specific model space point is in the center of the pviewport. I'm manipulating the pviewport properties to try to accomplish this. To have the view perpendicular to the model space XY plane, I've set the pviewport direction property at 0,0,1 and am varying the arrangement of model space objects with the pviewport target property.
When doing this by hand, I use the DVIEW command and the POints option to set the camera and target. The model space point I want in the center of the pviewport is 16.25,11.5,0. In the DVIEW command, POints option, I set target to 16.25,11.5,0 and camera to 16.25,11.5,1.
When attempting to do this with a macro I'm not finding any obvious correlation between the pviewport target property setting and the location of the desired model space point. Below are the lines to set the target property in a pviewport called PVPort created in previous steps. When I set the target property to 0,0,0, the model space point 45.3541, 17, 0 is in the center of the pviewport. When I set the target property to 16.25,11.5,0, the model space point 61.6041,28.5,0 is in the center of the pviewport.
If the pviewport has a twist angle of a scale not 1.0 (and therfore a different model space point I'm wanting in the center of the pviewport), it gets more confusing.
Dim VPP(0 to 2) as Double
VPP(0) = 0: VPP(1) = 0: VPP(2) = 0
PVPort.Target = VPP
I have a multiple blocks in my drawing and I would like to select certain obejects within these block from model space, i.e all lines = White, and then return their their combined length.
At the moment I have to explode all of the blocks, use qselect, run length.lsp to get the combined length of the selection and then undo the actions previous to the block explosion.
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
How do i rotate objects, plans...etc on model space in a view port.
View 9 Replies View RelatedIs there a quick way to simultaneously delete all objects in a layer if these objects are found across several layout tabs and model space?
At the moment, I'm getting the objects using: (setq a (ssget "X" '((8 . "Revision"))))
This finds all objects in the drawing, but if I just use: (command "_.erase" a "")
to delete them, only the the objects in the current layout or space are getting deleted...
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
I thought there is command that will crop a window area in model space to minimize the amount of objects.
View 4 Replies View RelatedWithout opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View Related